Xigmatek Intros Bifrost VD1065 VGA Cooler

[btarunr]

Good Eyes, I was wondering when someone was going to realize its been done before.

That sucker eats 3 slots. Stay away from it:

http://img.techpowerup.org/091006/bta105.jpg

Does give good temps though. Idles in the 30s, loads in the 50s.

 

[theorw]

That sucker eats 3 slots. Stay away from it:

http://img.techpowerup.org/091006/bta104.jpg

http://img.techpowerup.org/091006/bta105.jpg

Does give good temps though. Idles in the 30s, loads in the 50s.

I ll stick to my musashi!Will be enough for my 5850 and i ll find a way around the digital mosfet cooling thingie!

Cypress has 53 mm mount-holes. Go ahead and use this. The problem however, is its tiny VRM chips. Single-piece MOSFET heatsinks are sometimes too heavy and yet inefficient for them. The VRM chips on graphics cards with digital-PWM are in theory hotter than a single-FETs because each chip packs both up and down FETs, and the driver IC into a single package.

Something that comes in my mind is that u can buy some themal pad and put some smaller heatsinks altogether on one,contact pad and then put them to the VRMS.My point is that the themral pad sticks MILLIONS times better that the pre applied glue to the mosfets and so u can attach bigger heavier or multiple sinks in the VRMS and thus keep them cooler.

 

[AsRock]

That sucker eats 3 slots. Stay away from it:

http://img.techpowerup.org/091006/bta104.jpg

http://img.techpowerup.org/091006/bta105.jpg

Does give good temps though. Idles in the 30s, loads in the 50s.

Mayas well have 120mm fans on it.. 3 slots WOW but don't care.

musashi modable for larger heatsinks on the vrms too.

 

[MilkyWay]

That sucker eats 3 slots. Stay away from it:

http://img.techpowerup.org/091006/bta104.jpg

http://img.techpowerup.org/091006/bta105.jpg

Does give good temps though. Idles in the 30s, loads in the 50s.

3 slots is a bit to much for my liking im staying clear of this cooler
stick to something else i think

 

[sneekypeet]

That sucker eats 3 slots. Stay away from it:

http://img.techpowerup.org/091006/bta104.jpg

http://img.techpowerup.org/091006/bta105.jpg

Does give good temps though. Idles in the 30s, loads in the 50s.

maybe on that card, but it was only lke 2-3*C cooler with 3 fans at full RPM vs. the stock cooler at 90% on my 9800GTX Thats without the fact it warped the cards tremendously.

 

[mab1376]

you think it would be compatible with this?

Thermalright VRM-r2