de.das.dude
Pro Indian Modder
- Joined
- Jun 13, 2010
- Messages
- 9,114 (1.72/day)
- Location
- Internet is borked, please help.
| System Name | Monke | Work Thinkpad| J1nnx took Old Monke |
|---|---|
| Processor | Ryzen 5600X | Ryzen 5500U | FX8320 |
| Motherboard | ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4 |
| Cooling | 240mm Rad | Not needed | hyper 212 EVO |
| Memory | 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600 |
| Video Card(s) | Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB |
| Storage | Samsung 980 nvme (Primary) | some samsung SSD |
| Display(s) | Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L |
| Case | Ant Esports Tempered case | Thinkpad | Antec |
| Audio Device(s) | Logitech Z333 | Jabra corpo stuff |
| Power Supply | Corsair RM750e | not needed | Corsair GS 600 |
| Mouse | Logitech G400 | nipple |
| Keyboard | Logitech G213 | stock kb is awesome | Logitech K230 |
| VR HMD | ;_; |
| Software | Windows 10 Professional x3 |
| Benchmark Scores | There are no marks on my bench |
To view this case mod, go here.
Specs:
AMD Phenom II 945 @ 3.6GHz
ASUS M4A785D-M PRO HT@2400MHz NB@2400MHz
2GB DDR2 Transcend 800MHz RAM
XFX ATI 1GB HD4650 engine@650, Memory at 840
Frontech 500W PSU
Chenbro PC311 case
Mods:
Cut out sized hole beside GPU, cut out 1mm aluminium sheet to fit that hole, cut two holes in the aluminium sheet for 2 80mm GPU exhaust fans. Cut out case below for a 80mm intake fan for GPU.
Put up blue high intensity LEDs.
cut channels in front bezel, painted channels silver(for reflection and cool effects) put up blue lights there, drilled a hole in the front of case, passed wires attached jack and connected up the front bezel lights.
to Do:- fan speed controller, more lights(different colors). exhausts at the top. and finally a paintjob. also may try to integrate a HDD cooler.
This is the very first mod. knowing this, rate me.
Oh and this all has been done under 20$.
vote for a BBITian!
Specs:
AMD Phenom II 945 @ 3.6GHz
ASUS M4A785D-M PRO HT@2400MHz NB@2400MHz
2GB DDR2 Transcend 800MHz RAM
XFX ATI 1GB HD4650 engine@650, Memory at 840
Frontech 500W PSU
Chenbro PC311 case
Mods:
Cut out sized hole beside GPU, cut out 1mm aluminium sheet to fit that hole, cut two holes in the aluminium sheet for 2 80mm GPU exhaust fans. Cut out case below for a 80mm intake fan for GPU.
Put up blue high intensity LEDs.
cut channels in front bezel, painted channels silver(for reflection and cool effects) put up blue lights there, drilled a hole in the front of case, passed wires attached jack and connected up the front bezel lights.
to Do:- fan speed controller, more lights(different colors). exhausts at the top. and finally a paintjob. also may try to integrate a HDD cooler.
This is the very first mod. knowing this, rate me.
Oh and this all has been done under 20$.
vote for a BBITian!
Last edited by a moderator:
