- Joined
- Jan 13, 2006
- Messages
- 1,497 (0.22/day)
- Location
- Windsor, Ontario, Canada
System Name | Bones Beast |
---|---|
Processor | Intel Core i7 4770k@4.5ghz |
Motherboard | ASROCK Extreme 3 Z87 |
Cooling | Corsair H100 4x120mm fans! |
Memory | 2x4gigs Corsair Vengance 2400mhz |
Video Card(s) | XFX R9 290 @1151/1350/Corsair H55 |
Storage | Samsung 120gig 840/OCZ Vector 120gig SSD/500gig SG/320 |
Display(s) | Samsung S27A950D 27in 3D 120hz monitor |
Case | NZXT S340 |
Audio Device(s) | Asus Zonar d1/Z506 Speakers |
Power Supply | Coolermaster GX750watt PSU |
Software | Windows 10 64bit |
To view this case mod, go here.
Specs:
Intel Core@Duo e8400 3.0, Asus P5k Motherboard, 2x2gig 1066 Patriot Viper high performance ram, Diamond HD4870 Default 800/1100,Razer Diamondback mouse, Logitech x-540 5.1s WD 160gig sata HD,2x40 gig hdd satas, Soundblaster X-Fi Extreme Gamer, Coolermaster 500w PSU, Antec 900 case
Mods:
E8400 OCed to 3.4 Vcore 1.25, Diamond HD4870 OCed to 820/1120 accelero s1 w/2 120mm fans,Cooling-cpu Coolermaster water cooling , 4x120mm fans,Added ducting to rear for additional cooling from outdoors
New case and hopefully good cable management,
Had to remove plastic part off the side of the side panel.
Rad and screw hole didnt match up, so had to hot glue it in.
Added 120mm fan to back so it would help pull out air from rad. Used dryer ducting and added a fan from the intel heatsink to the inside of the ducting and attached it to back of case the other is out window.
Air coming in from ducting is sucked into PSU cooling it and the 120s above Blow air over card and up to rad cooling rad and card. Hope you all like
Dont know if i should have made a new post altogether or not
Specs:
Intel Core@Duo e8400 3.0, Asus P5k Motherboard, 2x2gig 1066 Patriot Viper high performance ram, Diamond HD4870 Default 800/1100,Razer Diamondback mouse, Logitech x-540 5.1s WD 160gig sata HD,2x40 gig hdd satas, Soundblaster X-Fi Extreme Gamer, Coolermaster 500w PSU, Antec 900 case
Mods:
E8400 OCed to 3.4 Vcore 1.25, Diamond HD4870 OCed to 820/1120 accelero s1 w/2 120mm fans,Cooling-cpu Coolermaster water cooling , 4x120mm fans,Added ducting to rear for additional cooling from outdoors
New case and hopefully good cable management,
Had to remove plastic part off the side of the side panel.
Rad and screw hole didnt match up, so had to hot glue it in.
Added 120mm fan to back so it would help pull out air from rad. Used dryer ducting and added a fan from the intel heatsink to the inside of the ducting and attached it to back of case the other is out window.
Air coming in from ducting is sucked into PSU cooling it and the 120s above Blow air over card and up to rad cooling rad and card. Hope you all like
Dont know if i should have made a new post altogether or not
Last edited by a moderator: