- Joined
- Dec 6, 2011
- Messages
- 4,784 (1.00/day)
- Location
- Still on the East Side
SanDisk Corporation, a global leader in flash memory storage solutions, today announced it has developed the world's smallest 128 gigabit (Gb) NAND flash memory chip currently in production. The semiconductor device can store 128 billion individual bits of information on a single silicon die 170 mm2 in size - a little more than a quarter of an inch squared, or smaller than the area covered by a U.S. penny.
The use of NAND flash memory in high tech equipment like smartphones, tablets and solid state drives (SSDs) allows advances in the full function, small form factor devices that are highly valued by consumers. Shrinking the size of NAND flash memory allows smaller, more powerful computing, communications and consumer electronics devices to be built while keeping costs low.
SanDisk built the 128 Gb NAND flash memory chip on the company's industry-leading 19 nanometer (nm) process technology. A nanometer measures one-billionth of a meter, meaning that 19 nm circuit lines are so small that about 3,000 of them could fit across the width of a human hair. The chip also employs SanDisk's three-bit per cell (X3) technology that allows the company to build NAND flash memory products with the ability to read and write three bits of information in each memory cell.
At 19 nm, SanDisk is deploying its ninth generation of multi-level cell (MLC) NAND products and fifth generation of X3 technology. This combination of manufacturing and technical expertise helps SanDisk pack more information into each memory cell making it possible to create a smaller, denser NAND flash memory chip.
"Building a 128 Gb NAND flash memory chip with this level of complexity is an incredible achievement," said Mehrdad Mofidi, vice president, Memory Design. "This innovation allows SanDisk to continue to be a leader in helping our customers deliver smaller, more powerful products capable of doing more at lower cost."
In addition to reduced size, the 128 Gb semiconductor device has an industry-leading X3 write performance of 18 megabytes (MB) per second. This level of performance is achieved using SanDisk's patented advanced all bit line (ABL) architecture and means that X3 technology could be extended to certain product categories that use MLC NAND flash memory. A technical paper outlining the breakthrough will be presented at the International Solid-State Circuits Conference (ISSCC) in San Francisco today.
The 128 Gb NAND flash memory chip was developed jointly by teams from SanDisk and Toshiba at SanDisk's Milpitas campus. The effort was led by Yan Li, director of Memory Design at SanDisk. Products based on the 128 Gb three-bit per cell technology began shipping late last year and have already started to ramp into high volume production. SanDisk has also developed a derivative product based on the success of the 128 Gb chip - a 64 Gb, X3 NAND flash memory chip that is compatible with the industry-standard microSD format. The company has also started to ramp production of this additional chip technology.
NAND flash memory is the technology behind the high reliability, small form factor storage solutions that SanDisk sells to OEM customers for use in a wide variety of products such as smartphones, tablets and Ultrabooks. It is also the technology used in products SanDisk sells through its retail channel in the form of imaging and mobile cards, USB drives and mp3 players.
View at TechPowerUp Main Site
The use of NAND flash memory in high tech equipment like smartphones, tablets and solid state drives (SSDs) allows advances in the full function, small form factor devices that are highly valued by consumers. Shrinking the size of NAND flash memory allows smaller, more powerful computing, communications and consumer electronics devices to be built while keeping costs low.
SanDisk built the 128 Gb NAND flash memory chip on the company's industry-leading 19 nanometer (nm) process technology. A nanometer measures one-billionth of a meter, meaning that 19 nm circuit lines are so small that about 3,000 of them could fit across the width of a human hair. The chip also employs SanDisk's three-bit per cell (X3) technology that allows the company to build NAND flash memory products with the ability to read and write three bits of information in each memory cell.
At 19 nm, SanDisk is deploying its ninth generation of multi-level cell (MLC) NAND products and fifth generation of X3 technology. This combination of manufacturing and technical expertise helps SanDisk pack more information into each memory cell making it possible to create a smaller, denser NAND flash memory chip.
"Building a 128 Gb NAND flash memory chip with this level of complexity is an incredible achievement," said Mehrdad Mofidi, vice president, Memory Design. "This innovation allows SanDisk to continue to be a leader in helping our customers deliver smaller, more powerful products capable of doing more at lower cost."
In addition to reduced size, the 128 Gb semiconductor device has an industry-leading X3 write performance of 18 megabytes (MB) per second. This level of performance is achieved using SanDisk's patented advanced all bit line (ABL) architecture and means that X3 technology could be extended to certain product categories that use MLC NAND flash memory. A technical paper outlining the breakthrough will be presented at the International Solid-State Circuits Conference (ISSCC) in San Francisco today.
The 128 Gb NAND flash memory chip was developed jointly by teams from SanDisk and Toshiba at SanDisk's Milpitas campus. The effort was led by Yan Li, director of Memory Design at SanDisk. Products based on the 128 Gb three-bit per cell technology began shipping late last year and have already started to ramp into high volume production. SanDisk has also developed a derivative product based on the success of the 128 Gb chip - a 64 Gb, X3 NAND flash memory chip that is compatible with the industry-standard microSD format. The company has also started to ramp production of this additional chip technology.
NAND flash memory is the technology behind the high reliability, small form factor storage solutions that SanDisk sells to OEM customers for use in a wide variety of products such as smartphones, tablets and Ultrabooks. It is also the technology used in products SanDisk sells through its retail channel in the form of imaging and mobile cards, USB drives and mp3 players.
View at TechPowerUp Main Site
