- Joined
- Oct 9, 2007
- Messages
- 47,244 (7.54/day)
- Location
- Hyderabad, India
| System Name | RBMK-1000 |
|---|---|
| Processor | AMD Ryzen 7 5700G |
| Motherboard | ASUS ROG Strix B450-E Gaming |
| Cooling | DeepCool Gammax L240 V2 |
| Memory | 2x 8GB G.Skill Sniper X |
| Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
| Storage | Western Digital Black NVMe 512GB |
| Display(s) | BenQ 1440p 60 Hz 27-inch |
| Case | Corsair Carbide 100R |
| Audio Device(s) | ASUS SupremeFX S1220A |
| Power Supply | Cooler Master MWE Gold 650W |
| Mouse | ASUS ROG Strix Impact |
| Keyboard | Gamdias Hermes E2 |
| Software | Windows 11 Pro |
Over the weekend, Inno3D held a lavish GeForce GTX 680 launch event, in Hong Kong, even though it announced its GeForce GTX 680 products with other partners, on March 22. We know Inno3D has a custom-design liquid-cooled GTX 680 in the works, it obviously has an NVIDIA reference-design model, too; but at the launch event, Inno3D unveiled its third GTX 680 product, an air-cooled factory-overclocked model, called the Inno3D GeForce GTX 680 TwinFan.
Pictured below, the card features an in-house cooler design by Inno3D, which has a racy-looking metallic-orange cooler shroud, and two fans ventilating it. It could feature a conventional heat pipe-fed heatsink underneath. It's also possible that Inno3D is sticking to NVIDIA reference-design PCB. The cooler shroud, according to Inno3D, is detachable without much effort, which enables end-users to keep the heatsink below it clean, and maintain high cooling performance. The fans are also said to spin at low speeds, resulting in lower load noise levels than NVIDIA reference cooler. More details are awaited.
Update: Thanks to the high-resolution image, we can see how Inno3D's easy detachable cooler shroud works: thumb-screws.
View at TechPowerUp Main Site
Pictured below, the card features an in-house cooler design by Inno3D, which has a racy-looking metallic-orange cooler shroud, and two fans ventilating it. It could feature a conventional heat pipe-fed heatsink underneath. It's also possible that Inno3D is sticking to NVIDIA reference-design PCB. The cooler shroud, according to Inno3D, is detachable without much effort, which enables end-users to keep the heatsink below it clean, and maintain high cooling performance. The fans are also said to spin at low speeds, resulting in lower load noise levels than NVIDIA reference cooler. More details are awaited.
Update: Thanks to the high-resolution image, we can see how Inno3D's easy detachable cooler shroud works: thumb-screws.
View at TechPowerUp Main Site
Last edited:
was it used before by Inno?
) and in multiple colours(accessory?)
