• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Lamptron Outs G1/4" Barbed Fitting

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,291 (7.53/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Lamptron's newest creation for water-cooling buffs is a highly accessible G1/4" barbed fitting. The fitting acts as an interface between water-blocks and tubing. Made of copper, Lamptron's fitting comes in three color options: matte black, chrome-silver, and brass. Measuring 18 x 25 mm, the fitting is designed for three installation methods: by hand (thanks to its barbing), using a wrench (thanks to its cut-ins), and using a coin (thanks to its slits). It supports ID3/8", ID7/16", and ID1/2" tubing sizes. The fitting will be sold in sets of two, priced at US $6.99.



View at TechPowerUp Main Site
 
Joined
May 6, 2005
Messages
2,792 (0.39/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
Not sure what to think of this.
I've been watercooling my "hot stuffs" for about 8 years now, last few years I've not paid much attention to what's going on in that market. This certainly is the first time I see a pimped tube fitting.

What next? LED lit fittings?
 
Joined
Jul 5, 2008
Messages
337 (0.06/day)
System Name Roxy
Processor i7 5930K @ 4.5GHz (167x27 1.35V)
Motherboard X99-A/USB3.1
Cooling Barrow Infinity Mirror, EK 45x420mm, EK X-Res w 10W DDC
Memory 2x16GB Patriot Viper 3600 @3333 16-20-20-38
Video Card(s) XFX 5700 XT Thicc III Ultra
Storage Sabrent Rocket 2TB, 4TB WD Mechanical
Display(s) Acer XZ321Q (144Mhz Freesync Curved 32" 1080p)
Case Modded Cosmos-S Red, Tempered Glass Window, Full Frontal Mesh, Black interior
Audio Device(s) Soundblaster Z
Power Supply Corsair RM 850x White
Mouse Logitech G403
Keyboard CM Storm QuickFire TK
Software Windows 10 Pro
Benchmark Scores https://valid.x86.fr/e5uz5f
Looks nice, compression fittings are so last year!
 
Joined
Oct 17, 2011
Messages
857 (0.18/day)
Location
Oregon
System Name Red 101
Processor 9th Gen Intel Core i9-9900k
Motherboard EVGA Z370 Classified
Cooling Custom Primochill and Heatkiller water cooling loop
Memory 16GB of Gskill 3200Mhz CL14
Video Card(s) EVGA GeForce GTX 1080 FTW2 with Heatkiller block @2114Mhz
Storage 4- Samsung Evo 250GB, 1- Pro 512GB and 1-512GB M.2
Display(s) LG 38" UW
Case In Win 101 customized a lot and painted red
Audio Device(s) Razer Kraken 7.1 Chroma
Power Supply EVGA 850w G2
Mouse Razer DeathAdderv2
Keyboard Razer Ornata Chroma
Software Win10Pro and games
Benchmark Scores NA
really you need a wrench to tighten it? lol hand tight it tight enough. I have seen people strip out the threads in rads because of wrenching them down, completely no need for that, if you are having a issue then you need a new o-ring not a bigger wrench. plus hardly any surface area for a wrench, you slip and it will make that barb look gross and crewed up. (not that it is different from others, most all are tighten by wrench)

the whole quarter thing is silly. added feature. lol. someone was bored and said "how many features can we put on a barb, people love features"

I am with Initialised ... use compression fittings, if you can foot the bill, if not then just get regular barbs.

over all likely a good product but fittings are still not cheap @ $6.99 a shot :(
 

XNine

CaseLabs Rep
Joined
Mar 9, 2012
Messages
172 (0.04/day)
Location
Los Angeles
System Name Project 14
Processor Intel 4770K
Motherboard Asus Impact
Cooling MIPS Waterblock
Memory 16GB
Video Card(s) GTX 780 with AquaComputer block
Storage 256GB Samsung Pro 850, 2TB Western Digital HDD
Display(s) 27" Acer 1440P
Case CaseLabs Mercury S3
Power Supply Silverstone 700w Sleeved with MDPCX
Mouse Mionix Castor
Keyboard Code with Cherry Clears
Software Windows 10
Not sure what to think of this.
I've been watercooling my "hot stuffs" for about 8 years now, last few years I've not paid much attention to what's going on in that market. This certainly is the first time I see a pimped tube fitting.

What next? LED lit fittings?

There are already LED fittings, designed to illuminate reservoirs. Nothing wrong with that. Monsoon will soon be releasing their LED fittings which are far better than the ones available now that bleed light out everywhere.

There's still quite a bit of room in the market to make products that are beneficial.
 
Joined
Aug 11, 2009
Messages
6,824 (1.22/day)
Location
Viking Land
System Name CosmosII
Processor Ryzen 7700
Motherboard Gigabyte b650 gaming x ax v2
Cooling BeQuiet Pure Rock v2
Memory Corsair Vengeance RGB DDR5-6000 2x16GB
Video Card(s) Inno3d RTX 4070 Ti Super
Storage 1tb Corsair MP600 Pro XT
Display(s) 34" Ultrawide
Case Cosmos II
Audio Device(s) stock onboard thing
Power Supply RM850E
Software ½½
oh wow a barb, damn, talk about progress in wc :banghead:
 

popswala

New Member
Joined
May 29, 2009
Messages
2,257 (0.40/day)
Location
Conway, AR
System Name Deep Space // Black Mystery
Processor AMD Phen II X4 945 oc'd 3.4GHz // I7 870 oc'd 4.0GHz
Motherboard Gigabyte 990FXA-UD7 AM3+ // MSI P55-GD80
Cooling Corsair H50 w/ x2 gelid wing blue 120mm // Tt Frio OCK
Memory G. Skill Snipers DDR3 1600 2x4GB // G.Skill Tridents DDR3 2000 2x2GB
Video Card(s) eVGA GTX 275 // eVGA GTX 460 SC 768mb oc'd (830/1620/2000
Storage Seagate 1TBx2 7200.12 /1.5TB/500GB/750GB // Mushkin Collistro 60GB
Display(s) LG 23" 2353v-pf 1920x1080p // None
Case Tt Chazer MK-1 // NZXT Phantom black modded
Audio Device(s) Logitech G51 5.1 // None
Power Supply Cooler Master Silent Pro Hybrid 850w // Corsair HX1000W
Software Win 7 Ult X64 // Win 7 Ult X64
Benchmark Scores Crunching & Folding 24/7 Help Save Lives!!!
Comps is where its at lol. I trust them better then barbs and worm clamps. Plus I love the look of comps.

These do look nice and at a decent price for a pair. May have to look into these.
 
Joined
Oct 26, 2011
Messages
3,145 (0.65/day)
Processor 8700k Intel
Motherboard z370 MSI Godlike Gaming
Cooling Triple Aquacomputer AMS Copper 840 with D5
Memory TridentZ RGB G.Skill C16 3600MHz
Video Card(s) GTX 1080 Ti
Storage Crucial MX SSDs
Display(s) Dell U3011 2560x1600 + Dell 2408WFP 1200x1920 (Portrait)
Case Core P5 Thermaltake
Audio Device(s) Essence STX
Power Supply AX 1500i
Mouse Logitech
Keyboard Corsair
Software Win10
Actually barbs with clamps are more safe than compression fittings, at least to my knowledge.
 

XNine

CaseLabs Rep
Joined
Mar 9, 2012
Messages
172 (0.04/day)
Location
Los Angeles
System Name Project 14
Processor Intel 4770K
Motherboard Asus Impact
Cooling MIPS Waterblock
Memory 16GB
Video Card(s) GTX 780 with AquaComputer block
Storage 256GB Samsung Pro 850, 2TB Western Digital HDD
Display(s) 27" Acer 1440P
Case CaseLabs Mercury S3
Power Supply Silverstone 700w Sleeved with MDPCX
Mouse Mionix Castor
Keyboard Code with Cherry Clears
Software Windows 10
Actually barbs with clamps are more safe than compression fittings, at least to my knowledge.

Not true, plus compressions have a cleaner look to them overall. Compressions, as long as your using the diameter tubing that they correlate with, are pretty much infallible. Ever try to pull a piece of tygon from a compression fitting? It's not going to happen.
 
Joined
Oct 26, 2011
Messages
3,145 (0.65/day)
Processor 8700k Intel
Motherboard z370 MSI Godlike Gaming
Cooling Triple Aquacomputer AMS Copper 840 with D5
Memory TridentZ RGB G.Skill C16 3600MHz
Video Card(s) GTX 1080 Ti
Storage Crucial MX SSDs
Display(s) Dell U3011 2560x1600 + Dell 2408WFP 1200x1920 (Portrait)
Case Core P5 Thermaltake
Audio Device(s) Essence STX
Power Supply AX 1500i
Mouse Logitech
Keyboard Corsair
Software Win10
I've had one compression leak, but that is probably a manufacturing defect.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
42,537 (6.67/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
depth of threads make me question integrity of them when installed properly even
 
Joined
May 25, 2005
Messages
121 (0.02/day)
These look nice, but I still prefer Monsoon compressor fittings which use same cut in design for screwing fittings in. Good match up with Monsoons if you need barbs for any reason.
 
Joined
Sep 7, 2011
Messages
2,785 (0.57/day)
Location
New Zealand
System Name MoneySink
Processor 2600K @ 4.8
Motherboard P8Z77-V
Cooling AC NexXxos XT45 360, RayStorm, D5T+XSPC tank, Tygon R-3603, Bitspower
Memory 16GB Crucial Ballistix DDR3-1600C8
Video Card(s) GTX 780 SLI (EVGA SC ACX + Giga GHz Ed.)
Storage Kingston HyperX SSD (128) OS, WD RE4 (1TB), RE2 (1TB), Cav. Black (2 x 500GB), Red (4TB)
Display(s) Achieva Shimian QH270-IPSMS (2560x1440) S-IPS
Case NZXT Switch 810
Audio Device(s) onboard Realtek yawn edition
Power Supply Seasonic X-1050
Software Win8.1 Pro
Benchmark Scores 3.5 litres of Pale Ale in 18 minutes.
depth of threads make me question integrity of them when installed properly even
Judging by the number of thread twists (2.5-3) visible in this picture, the tail (threaded end) looks to be a standard 5mm.

Nice enough I guess, but I tend to use Bitspower true silver comp fittings -excellent machining quality and antimicrobial - two birds, one stone as they say.
 
Last edited:
Joined
May 6, 2005
Messages
2,792 (0.39/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
There are already LED fittings, [...]
OFFS...
:laugh:
There's still quite a bit of room in the market to make products that are beneficial people want to buy.
Translated.
Monsoon will soon be releasing their LED fittings which are far better than the ones available now that bleed light out everywhere.
My signature (the visible part of it) replies perfectly for this.
 

XNine

CaseLabs Rep
Joined
Mar 9, 2012
Messages
172 (0.04/day)
Location
Los Angeles
System Name Project 14
Processor Intel 4770K
Motherboard Asus Impact
Cooling MIPS Waterblock
Memory 16GB
Video Card(s) GTX 780 with AquaComputer block
Storage 256GB Samsung Pro 850, 2TB Western Digital HDD
Display(s) 27" Acer 1440P
Case CaseLabs Mercury S3
Power Supply Silverstone 700w Sleeved with MDPCX
Mouse Mionix Castor
Keyboard Code with Cherry Clears
Software Windows 10
My signature (the visible part of it) replies perfectly for this.

You're right. People have their own preference. I prefer tasteful lighting in a chassis. Lighting is one of those things that can make or break a build. Usually, it breaks it, but done well it can improve the aesthetics of the build.
 
Top