To view this case mod, go here.
Specs:
CPU : Motherboard i7 2600k @4.5ghz
Motherboard : Asus Maximus V formula
Graphics Asus GTX 670 TOP DCII @1210mhz / 7400mhz SLI
RAM : G.Skill Ripjaws (4x4GB) 1866mhz
PSU : Seasonic Platinum 860w
Hard Drive : 256GB OCZ Vertex 4
CPU WB: EK Supremacy
Fans : 3 x NZXT 140mm White Fan
Fans : 7 x Scythe Gentle Typhoon 1850 Rpm 120mm Fan
Tube : EK Red UV Tubing
Fittings : EK | Bitspower Fittings
Radiator : EK 360 XTX Radiator and EK 240 XT Radiator
GPU WB : EK GTX670 DCII Full Cover Waterblock
Pump: Swiftech MCP355 Dual
Pump Top : EK-DDC Dual - TOP
Reservoir : EK Multioption X2 Res
Windows 8 Pro
Samsung s27a950dsl
Filco Majestouch 2 blue
NZXT Switch 810 - White
Mouse ; Cyborg R.A.T 9
Mouse Pad : Artisan Active Control Red
Bose Companion 5
Asus Xonar Phoebus
Shure SRH 1440
NZXT Sentry Mix
Mods:
Made a custom stand for my dual pump, screwed together with the front 140mm fans, made of aluminium for lightweight and custom paint it black to match the interior; specially design to get the airflow on the pump since DDC pump run pretty hot. Drill a few holes here and there for mounting purposes. Also the cable sleeving and the custom painted fan grills
Updated, removed the zip ties and combed the cables better
Specs:
CPU : Motherboard i7 2600k @4.5ghz
Motherboard : Asus Maximus V formula
Graphics Asus GTX 670 TOP DCII @1210mhz / 7400mhz SLI
RAM : G.Skill Ripjaws (4x4GB) 1866mhz
PSU : Seasonic Platinum 860w
Hard Drive : 256GB OCZ Vertex 4
CPU WB: EK Supremacy
Fans : 3 x NZXT 140mm White Fan
Fans : 7 x Scythe Gentle Typhoon 1850 Rpm 120mm Fan
Tube : EK Red UV Tubing
Fittings : EK | Bitspower Fittings
Radiator : EK 360 XTX Radiator and EK 240 XT Radiator
GPU WB : EK GTX670 DCII Full Cover Waterblock
Pump: Swiftech MCP355 Dual
Pump Top : EK-DDC Dual - TOP
Reservoir : EK Multioption X2 Res
Windows 8 Pro
Samsung s27a950dsl
Filco Majestouch 2 blue
NZXT Switch 810 - White
Mouse ; Cyborg R.A.T 9
Mouse Pad : Artisan Active Control Red
Bose Companion 5
Asus Xonar Phoebus
Shure SRH 1440
NZXT Sentry Mix
Mods:
Made a custom stand for my dual pump, screwed together with the front 140mm fans, made of aluminium for lightweight and custom paint it black to match the interior; specially design to get the airflow on the pump since DDC pump run pretty hot. Drill a few holes here and there for mounting purposes. Also the cable sleeving and the custom painted fan grills
Updated, removed the zip ties and combed the cables better
Last edited by a moderator: