- Joined
- Oct 9, 2007
- Messages
- 47,598 (7.45/day)
- Location
- Dublin, Ireland
| System Name | RBMK-1000 |
|---|---|
| Processor | AMD Ryzen 7 5700G |
| Motherboard | Gigabyte B550 AORUS Elite V2 |
| Cooling | DeepCool Gammax L240 V2 |
| Memory | 2x 16GB DDR4-3200 |
| Video Card(s) | Galax RTX 4070 Ti EX |
| Storage | Samsung 990 1TB |
| Display(s) | BenQ 1440p 60 Hz 27-inch |
| Case | Corsair Carbide 100R |
| Audio Device(s) | ASUS SupremeFX S1220A |
| Power Supply | Cooler Master MWE Gold 650W |
| Mouse | ASUS ROG Strix Impact |
| Keyboard | Gamdias Hermes E2 |
| Software | Windows 11 Pro |
On taking apart the Acer S7 Ultrabook, The SSD Review discovered a strange new SSD form-factor, which bears the label of Lite-On, and carrying the model number "CMT-256L3M." This is perhaps the first mSATA SSD with two independent SSD subunits, one on each side. The mSATA interface itself is modified to have two SSD ports. The drive registers on the system BIOS as two individual drives, which is then run as a 256 GB (physical) RAID 0 volume by the BIOS and operating-system.
Each of the CMT-256L3M's two subunits feature a Marvell 88S9175 controller, which supports SATA 6 Gb/s interface, two 64 GB dual-channel 24 nm toggle NAND flash memory chips by Toshiba, and a Nanya-made DRAM cache chip. Putting the drive through sequential-friendly benchmarks such as CrystalDiskMark shows a sequential read speed of the drive (combined with its two subunits) to be around 877 MB/s, with sequential writes up to 672 MB/s. Multi-subunit SSDs aren't new, most high-end consumer SSDs from the pre-TRIM, pre-SandForce era used to be dual- to quad-subunit drives. The CMT-256L3M is the first one in the super-compact mSATA form-factor, and its performance numbers could impress more Ultrabook designers.
View at TechPowerUp Main Site
Each of the CMT-256L3M's two subunits feature a Marvell 88S9175 controller, which supports SATA 6 Gb/s interface, two 64 GB dual-channel 24 nm toggle NAND flash memory chips by Toshiba, and a Nanya-made DRAM cache chip. Putting the drive through sequential-friendly benchmarks such as CrystalDiskMark shows a sequential read speed of the drive (combined with its two subunits) to be around 877 MB/s, with sequential writes up to 672 MB/s. Multi-subunit SSDs aren't new, most high-end consumer SSDs from the pre-TRIM, pre-SandForce era used to be dual- to quad-subunit drives. The CMT-256L3M is the first one in the super-compact mSATA form-factor, and its performance numbers could impress more Ultrabook designers.
View at TechPowerUp Main Site
