ASUS P9X79-E WS Detailed

[btarunr]

It looks like the void left by lack of socket LGA1150 motherboards is being filled by new LGA2011 HEDT ones, with ASUS joining in with the P9X79-E WS. The board is so big and feature-packed that its designers labeled it a workstation board that's built in the SSI-CEB form-factor (should fit in full-ATX cases that have room for EATX). The board features a 10-phase CPU VRM, seven PCI-Express 3.0 x16 slots, which are wired to the CPU through a couple of 48-lane PCI-Express bridge chips, support for 128 GB quad-channel DDR3 memory, six SATA 6 Gb/s ports (two from the X79 PCH, four from third-party controllers), four SATA 3 Gb/s ports, a couple of eSATA 6 Gb/s ports, four USB 3.0 ports, FireWire, 8-channel HD audio, and two gigabit Ethernet interfaces, which are each backed by Intel-made PHYs.



View at TechPowerUp Main Site

 

[NHKS]

# of ram slots = # of PCI-E slots!.. oh wait, there's one less

 

[_JP_]

128GB of RAM...I could store my Steam folder in a RAM disk.
That motherboard is crowded. Looks impressive.

 

[tehehe]

I would prefer cheap, desktop, 2x 1150 socket mobo's than this. I wonder why there are no such products on the market.

 

[blibba]

I would prefer cheap, desktop, 2x 1150 socket mobo's than this. I wonder why there are no such products on the market.

Because there are no dual-processor-compatible CPUs for socket 1150?

 

[Prima.Vera]

why so big radiator there??

128GB of RAM...I could store my Steam folder in a RAM disk.

And wait 30 mins each time when closing the PC ??

 

[mlee49]

And wait 30 mins each time when closing the PC ??

Why even turn it off, just leave it on 24/7. It is a WorkStation version

 

[Aquinus]

Nice looking board. The extra PCI-E slots are nice but I still think I'd rather have my Deluxe. It only has 8 phase CPU power where the Deluxe has 20, despite fewer PCI-E slots.

 

[lilhasselhoffer]

I would prefer cheap, desktop, 2x 1150 socket mobo's than this. I wonder why there are no such products on the market.

Or perhaps because socket 1150 has yet to be released?


Sorry, had to say it. Socket 1155 doesn't even have the hardware to link multiple CPUs on one board (only 2011 has that ability currently). If the hardware doesn't support it, you're not likely to see it in consumer level boards.

 

[blibba]

why so big radiator there??

When you've got as many third-party chips as these high end X79 boards do, you either have a massive heatsink (which I presume is what you're referring to) or an annoying little fan like the Asrock X79 Extreme11.

 

[Aquinus]

only 2011 has that ability currently

An i7 isn't going to be able to run more than one CPU in a dual-CPU motherboard, it doesn't have the QPI links for the second CPU. You need a particular Xeon for that and those chips get really pricey really quick.

 

[Octavean]

Nice looking board. The extra PCI-E slots are nice but I still think I'd rather have my Deluxe. It only has 8 phase CPU power where the Deluxe has 20, despite fewer PCI-E slots.

I like this board,......


but I am with you bro,... us Asus P9X79 Deluxe users need to stick together,....

 

[Disparia]

This board is so hot, I want to make love to it.


Asus *could* make a dual socket board if they wanted to, but their rebel streak fizzled out long ago.

 

[Aquinus]

This board is so hot, I want to make love to it.

Sometimes you just need to indulge and go with something nice. I'd rather have the beefier VRMs though. There are a lot of really nice things on this board though. For example all of the fan headers are 4-pin PWM, and there are something like 6 of them.

 

[Disparia]

Looks really nice too... this could get kinky real fast.

Unfortunately or fortunately depending on how one looks at it, I'm kinda low on the upgrade stack at the moment. Kid #2 is older now, going to get the wife's old computer and she'll get a new one. I'll be getting a new GPU/monitor so that my current ones trickle down.

I won't be getting new core hardware until... oh, look at that... when the Ivy Bridge-E chips are slated to be released

 

[radrok]

Nice looking board. The extra PCI-E slots are nice but I still think I'd rather have my Deluxe. It only has 8 phase CPU power where the Deluxe has 20, despite fewer PCI-E slots.

Unless you clock your CPU at something like 5,2GHz+ you won't see any difference between 10 or 20 phases, that's seriously overkill.

 

[Aquinus]

Unless you clock your CPU at something like 5,2GHz+ you won't see any difference between 10 or 20 phases, that's seriously overkill.

Depends on what you consider overkill. More VRM phases means each VRM is doing less work so less heat is being generated per VRM. Also when Cadaveca reviewed the board he found that the Deluxe had measured only 1-watt usage on the VRMs when the machine was idle. So it's not just about overclocking. It's about stability, power loss, and efficiency along with how much power it can supply along with the quality of that power. I've seen my 3820 eat 250-watts of power and every time I overclock it that much I'm glad I have 20 phases of CPU VRM goodness to ensure the quality of that power being delivered. I have had no vdroop issues with this board at all and LLC had been extremely flexible.

 

[cadaveca]

Unless you clock your CPU at something like 5,2GHz+ you won't see any difference between 10 or 20 phases, that's seriously overkill.

4.3 GHz - 4.4 GHz on X79 is where VRMs really start become important. You'll find that many boards only offer 4.3 GHz auto clock because of this.

It's not just the number of phases that is important, but how much current each phase can supply.

 

[ChristTheGreat]

This board could be nice with alot of GPU for Crunching

 

[radrok]

Depends on what you consider overkill. More VRM phases means each VRM is doing less work so less heat is being generated per VRM. Also when Cadaveca reviewed the board he found that the Deluxe had measured only 1-watt usage on the VRMs when the machine was idle. So it's not just about overclocking. It's about stability, power loss, and efficiency along with how much power it can supply along with the quality of that power. I've seen my 3820 eat 250-watts of power and every time I overclock it that much I'm glad I have 20 phases of CPU VRM goodness to ensure the quality of that power being delivered. I have had no vdroop issues with this board at all and LLC had been extremely flexible.

I run a 3930K 24/7 @ 4,8 GHz 1.36v and I can easily increase the overclock to 5,2-5,3 GHz with 1.55v without any kind of voltage fluctuation.

This all on a Rampage IV Extreme, I think it has even less than 20 phases, what matters is the quality of the phases IMHO.

I've seen upwards of 400W on this chip with 1.55v+ btw

 

[cadaveca]

I run a 3930K 24/7 @ 4,8 GHz 1.36v and I can easily increase the overclock to 5,2-5,3 GHz with 1.55v without any kind of voltage fluctuation.

This all on a Rampage IV Extreme, I think it has even less than 20 phases, what matters is the quality of the phases IMHO.

I've seen upwards of 400W on this chip with 1.55v+ btw

Put that same chip on P9X79 Deluxe, and you'll never see 5.0 GHz stable, and your clocks will require more voltage. VRMs aren't the only part of clocking in this regard.

 

[radrok]

What's different then? Phases quality? I think the fact that my motherboard's VRM is watercooled helps quite a bit

 

[cadaveca]

What's different then? Phases quality? I think the fact that my motherboard's VRM is watercooled helps quite a bit

VRM, yes, part of it for sure, yours being watercooled will help, to a point. BIOS power limits might play a role as well, too...I am not sure.

However, on ASRock Fatal1ty Champion and X79 Extreme11, I can run 5.0 GHz @ 1.4 V on my 3960X, aircooled. P9X79 Deluxe, 1.4 V won't even get 4.6 GHz fully stable. 400+ Mhz is pretty big.

Forget about it on any other brand boards, they are just the same as the P9X79 Deluxe. What ASRock really does different I am not sure, but what I can say is that to my eyes, ASRock does have a far beefier VRM, on the Extreme11, 1000% for sure it's got the best VRM out of all boards I have tried.


ASUS neglected to send me ROG X79 boards, so I have no idea how well they work.


So, I hope that the same is not an issue on this WS board, but since it IS a WorkStation product, I do not really expect CPU clocking to be a top priority, and stability will be the key point.

 

[Aquinus]

P9X79 Deluxe, 1.4 V won't even get 4.6 GHz fully stable.

I've noticed this. After seeing the Extreme11 though, it makes me wish that I waited a little longer. Not to say that I'm not happy with the P9X79 Deluxe, but that embedded LSI controller on the Extreme11 is pretty awesome. I would have liked to have seen RAID 5 and 6 support though which is practically a deal breaker for the price of the board.