- Joined
- Jan 23, 2013
- Messages
- 19 (0.00/day)
System Name | T7BSY |
---|---|
Processor | i5 2500k |
Motherboard | Gigabyte GA-Z68X-UD3P Intel Z68 (REV B3) |
Cooling | C.M Hyper 212 Plus |
Memory | G Skill RipJaws X 8GB |
Video Card(s) | Palit GTX 680 4GB JetStream |
Storage | M4 SSD 120GB + OCZVertex 64GB |
Display(s) | Dell Ultrasharp U2412M 24 inch IPS |
Case | Corsair Carbide 500R White |
Audio Device(s) | ASUS Xonar D2X |
Power Supply | 750W OCZ ZS |
Software | Window 7 64 |
I can notice frame drops below 57, 58FPS or so. FC 3 at that FPS (30-50FPS), for me, it's a stuttering mess. That shows once more how relative this can be from one person to another.
well again i can crank the aa up and the other setting and get around 20 to 40 and still its smooth as on FC3, and id be more than happy to try and make a vid and run around, the only reason i turn the aa and select ssao is because of heat issues, and thats the only reason im changing my card tbh, and £265 for a Palit GTX 680 4GB JetStream was too good to turn down otherwise id be just as happy with a 7950 or 670, id like the 660ti to if it had a little more bandwidth, but again it not just the hardware in play here, its the games you play too, if you have a card with 2gig of ram you should be fine, and a good fast SSD helps too, with out knowing what your hardware is it hard to say, just remember blu ray is only 24 FPS and the best part it plays smooth, tends to judder when camrea is panning around but best part its smooth as tho a few more FPS here would help out there but im talking 10 FPS more