NZXT Announces H630 Ultra-Tower Chassis

NdMk2o1o · May 8, 2013

XNine said:
To answer some questions and elaborate more on the chassis:

The H630 will be sold worldwide.

This is not a "take" on Fractal's chassis, it is the successor to our H2 chassis released in early 2011.

The top and front panels are made from powder-coated steel.

The USB ports are located where they are because the chassis pulls air in from the right side as well. It's not a design flaw, it's actually the smartest place to put it when trying to keep the front and top nice and clean, as well from a design/manufacturing stand point.

Waita actually skip over my comments with some good old marketing blurb :toast:

if you really want to be taken seriously on here then you need to respond to people instead of sounding off like a robot, not impressed.

XNine · May 8, 2013

NdMk2o1o said:
Waita actually skip over my comments with some good old marketing blurb if you really want to be taken seriously on here then you need to respond to people instead of sounding off like a robot, not impressed.

Funny, because I'm not in marketing, nor do I have any marketing experience. I gave it to you straight, but I'm not going to coo you into liking something. I'd much rather have the USB/Audio ports on the right side. Keeps the front and top clean, which were part of the aesthetic goals of the chassis. Our designers didn't base their design off of one person's nitpicks, they did it off of their own experiences. :toast:

FreedomEclipse · May 8, 2013

Xnine - you forgot to attach a beverage holder to the side of the case man. bitches love beverage holders!

XNine · May 8, 2013

FreedomEclipse said:
Xnine - you forgot to attach a beverage holder to the side of the case man. bitches love beverage holders!

DAMN IT!!!! I knew it, I knew it! I said to them, I said "people want the beverage holders!"

Did they listen? No. This is why I drink myself to sleep at night.

MxPhenom 216 · May 8, 2013

FreedomEclipse said:
Xnine - you forgot to attach a beverage holder to the side of the case man. bitches love beverage holders!

This reminded me only of............

NdMk2o1o · May 8, 2013

XNine said:
Funny, because I'm not in marketing, nor do I have any marketing experience. I gave it to you straight, but I'm not going to coo you into liking something. I'd much rather have the USB/Audio ports on the right side. Keeps the front and top clean, which were part of the aesthetic goals of the chassis. Our designers didn't base their design off of one person's nitpicks, they did it off of their own experiences.

You claimed you were responding to questions/comments posted in the thread, you blurbed, you saying about the USB on the right side of the case didnt even listen to what I said about them so who exactly were you responding too? it wasn't a question anyway just some constructive criticism though I guess that is above your remit huh bud?

XNine · May 8, 2013

NdMk2o1o said:
You claimed you were responding to questions/comments posted in the thread, you blurbed, you saying about the USB on the right side of the case didnt even listen to what I said about them so who exactly were you responding too? it wasn't a question anyway just some constructive criticism though I guess that is above your remit huh bud?

I blurbed? ROFL. No, I didn't feel your commentary was constructive in any way, and I gave you a professional response. There were no marketing frills in my response to you. :cry:

NdMk2o1o · May 8, 2013

XNine said:
I blurbed? ROFL. No, I didn't feel your commentary was constructive in any way, and I gave you a professional response. There were no marketing frills in my response to you.

Ahhhhhh you chose to ignore me (the customer) until you felt like your sucking up to the forum would surpass your customer service requirements

cool bro

Urlyin · May 8, 2013

NdMk2o1o said:
Ahhhhhh you chose to ignore me (the customer) until you felt like your sucking up to the forum would surpass your customer service requirements cool bro

NdMk... no reason to blow it out of proportion. Talk constructively and perhaps you'll receive a response more to your liking. As far as the USB ports on the side doesn't bother me personally. Its more about the location of your desktop than a design flaw IMHO...

Fusionmech · May 8, 2013

Urlyin said:
NdMk... no reason to blow it out of proportion. Talk constructively and perhaps you'll receive a response more to your liking. As far as the USB ports on the side doesn't bother me personally. Its more about the location of your desktop than a design flaw IMHO...

Agreed

. Also the placement of the USB ports on the upper right side is obviously to dodge the 200mm fans. Mechanically and aesthetically it's a well thought out design.

RCoon · May 8, 2013

Take the interior of this, and then put it in the NZXT Phantom Full Enthusiast. Then you'll get me to buy your awesome steel case all over again!

NeoXF · May 8, 2013

james888 said:
eh... I don't know.

If you really must have it...
[yt]WpZoE-zj0-k[/yt]

I'd only realistically consider those if case makers would offer separately sold (spare) side-panels... or if I'd want to mod cheap-but-well-built-cases.

icenote · May 8, 2013

I just hope this allows for the NXZT Phantom 820 to become a little cheaper.. I love that case and the colour options, but, 250 bones is too much..

MxPhenom 216 · May 8, 2013

icenote said:
I just hope this allows for the NXZT Phantom 820 to become a little cheaper.. I love that case and the colour options, but, 250 bones is too much..

It wont change the Phantom 820. Just get the Phantom 630.

icenote · May 8, 2013

MxPhenom 216 said:
It wont change the Phantom 820. Just get the Phantom 630.

Yeah, I was afraid of that.

I am looking to getting a tower that supports an E-ATX MB (Mainly because I want there to be a lot of space between GPUs), though. And I don't think the 630 supports that. Or does it?

A close second for a tower would be the Rosewill Blackhawk Ultra. Not as flashy as the 820, but it supports my big MB needs.

MxPhenom 216 · May 8, 2013

icenote said:
Yeah, I was afraid of that.

I am looking to getting a tower that supports an E-ATX MB (Mainly because I want there to be a lot of space between GPUs), though. And I don't think the 630 supports that. Or does it?

A close second for a tower would be the Rosewill Blackhawk Ultra. Not as flashy as the 820, but it supports my big MB needs.

What do you mean space inbetween the GPUs? like the slots or between the GPUs and hard drive cages?

Because if your talking about the slots on the motherboard, just got to have a motherboard that has the right layout, so the GPUs have some space between them.

icenote · May 8, 2013

MxPhenom 216 said:
What do you mean space inbetween the GPUs? like the slots or between the GPUs and hard drive cages?

Because if your talking about the slots on the motherboard, just got to have a motherboard that has the right layout, so the GPUs have some space between them.

The current MB I have right now is an Asrock Z77 extreme 4. It does support CFX, but putting the doing will cause them to be extremely close to each other -- especially since my Vapor X card is actually 2.5 slots. I just want to have one that actually has an open PCI express slot for even more space and flow between the two cards. I will need a longer bridge, of course.

MxPhenom 216 · May 9, 2013

icenote said:
The current MB I have right now is an Asrock Z77 extreme 4. It does support CFX, but putting the doing will cause them to be extremely close to each other -- especially since my Vapor X card is actually 2.5 slots. I just want to have one that actually has an open PCI express slot for even more space and flow between the two cards. I will need a longer bridge, of course.

Well then that's motherboard choice, not case.

Like on this board, put it in the first and 3rd slot and there will be some space.

ASUS Maximus V EXTREME Intel Motherboard - Newegg....

And there will be space with your extreme 4, but only about half an inch. Which is sufficient enough, seeing how some people have their cards literally
touching.

And the Phantom 630 does support E-ATX as those boards are really only ATX boards with a little bit more to them. They don't have different mounting wholes. The Phantom 630 supports XL-ATX as well so.

sneekypeet · May 9, 2013

MxPhenom 216 said:
Well then that's motherboard choice, not case.

Like on this board, put it in the first and 3rd slot and there will be some space.

ASUS Maximus V EXTREME Intel Motherboard - Newegg....

And there will be space with your extreme 4, but only about half an inch. Which is sufficient enough, seeing how some people have their cards literally touching.

I agree, even with my 680 TOP there is plenty of room for a pair in the 1st and 3rd slots!

MxPhenom 216 · May 9, 2013

sneekypeet said:
I agree, even with my 680 TOP there is plenty of room for a pair in the 1st and 3rd slots!

And yours is a true triple slot cooler haha.

sneekypeet · May 9, 2013

I should clarify, 1st and 3rd red slots

I actually have access to the first black PCIe slot as well.

icenote · May 9, 2013

Ahhhh, okay.

For some reason I confused the 630 with the original Phantom (which I am using right now, the mid tower version).

Thanks!

My heart is still very much on the 820, but that 630 is a dandy deal.

XNine · May 9, 2013

icenote said:
Ahhhh, okay.

For some reason I confused the 630 with the original Phantom (which I am using right now, the mid tower version).

Thanks!

My heart is still very much on the 820, but that 630 is a dandy deal.

Yeah, the original Phantom is over 3 years old now. The industry and buyer expectations have changed since then, and thankfully so has the design team we have. Retell (Rob), our Product Manager, spends a lot of time on forums reading feedback, and he had a heavy hand in designing the H630.

So, the Phantom 820 was requested by a lot of people who wanted a Phantom with similar features to the Switch 810. The Phantom 630 is a bit smaller, yet wider, with more improved features that were developed after the 820's release.

The H630 is actually a successor to the H2 chassis, which was pretty okay for its time, but the amount of positive feedback on the H630 has been tremendous so far. I think it's priced extremely competitively given the amount of features it has.

MxPhenom 216 · May 9, 2013

XNine said:
Yeah, the original Phantom is over 3 years old now. The industry and buyer expectations have changed since then, and thankfully so has the design team we have. Retell (Rob), our Product Manager, spends a lot of time on forums reading feedback, and he had a heavy hand in designing the H630.

So, the Phantom 820 was requested by a lot of people who wanted a Phantom with similar features to the Switch 810. The Phantom 630 is a bit smaller, yet wider, with more improved features that were developed after the 820's release.

The H630 is actually a successor to the H2 chassis, which was pretty okay for its time, but the amount of positive feedback on the H630 has been tremendous so far. I think it's priced extremely competitively given the amount of features it has.

it could b my case this summer but I need a window!

XNine · May 9, 2013

MxPhenom 216 said:
it could b my saw this summer but I need a window!

I can't speak of unreleased products. :cool:

System Name	Ryzen Reynolds
Processor	Ryzen 1600 - 4.0Ghz 1.415v - SMT disabled
Motherboard	mATX Asrock AB350m AM4
Cooling	Raijintek Leto Pro
Memory	Vulcan T-Force 16GB DDR4 3000 16.18.18 @3200Mhz 14.17.17
Video Card(s)	Sapphire Nitro+ 4GB RX 580 - 1450/2000 BIOS mod 8-)
Storage	Seagate B'cuda 1TB/Sandisk 128GB SSD
Display(s)	Acer ED242QR 75hz Freesync
Case	Corsair Carbide Series SPEC-01
Audio Device(s)	Onboard
Power Supply	Corsair VS 550w
Mouse	Zalman ZM-M401R
Keyboard	Razor Lycosa
Software	Windows 10 x64
Benchmark Scores	https://www.3dmark.com/spy/6220813

System Name	Project 14
Processor	Intel 4770K
Motherboard	Asus Impact
Cooling	MIPS Waterblock
Memory	16GB
Video Card(s)	GTX 780 with AquaComputer block
Storage	256GB Samsung Pro 850, 2TB Western Digital HDD
Display(s)	27" Acer 1440P
Case	CaseLabs Mercury S3
Power Supply	Silverstone 700w Sleeved with MDPCX
Mouse	Mionix Castor
Keyboard	Code with Cherry Clears
Software	Windows 10

System Name	DarnGosh Edition
Processor	AMD 7800X3D
Motherboard	MSI X670E GAMING PLUS
Cooling	Thermalright AM5 Contact Frame + Phantom Spirit 120SE
Memory	G.Skill Trident Z5 NEO DDR5 6000 CL32-38-38-96
Video Card(s)	Asus Dual Radeon™ RX 6700 XT OC Edition
Storage	WD SN770 1TB (Boot)\| 2x 2TB WD SN770 (Gaming)\| 2x 2TB Crucial BX500\| 2x 3TB Toshiba DT01ACA300
Display(s)	LG GP850-B
Case	Corsair 760T (White) {1xCorsair ML120 Pro\|5xML140 Pro}
Audio Device(s)	Yamaha RX-V573\|Speakers: JBL Control One\|Auna 300-CN\|Wharfedale Diamond SW150
Power Supply	Seasonic Focus GX-850 80+ GOLD
Mouse	Logitech G502 X
Keyboard	Duckyshine Dead LED(s) III
Software	Windows 11 Home
Benchmark Scores	ლ(ಠ益ಠ)ლ

System Name	Project 14
Processor	Intel 4770K
Motherboard	Asus Impact
Cooling	MIPS Waterblock
Memory	16GB
Video Card(s)	GTX 780 with AquaComputer block
Storage	256GB Samsung Pro 850, 2TB Western Digital HDD
Display(s)	27" Acer 1440P
Case	CaseLabs Mercury S3
Power Supply	Silverstone 700w Sleeved with MDPCX
Mouse	Mionix Castor
Keyboard	Code with Cherry Clears
Software	Windows 10

System Name	Ryzen Reflection
Processor	AMD Ryzen 9 5900x
Motherboard	Gigabyte X570S Aorus Master
Cooling	2x EK PE360 \| TechN AM4 AMD Block Black \| EK Quantum Vector Trinity GPU Nickel + Plexi
Memory	Teamgroup T-Force Xtreem 2x16GB B-Die 3600 @ 14-14-14-28-42-288-2T 1.45v
Video Card(s)	Zotac AMP HoloBlack RTX 3080Ti 12G \| 950mV 1950Mhz
Storage	WD SN850 500GB (OS) \| Samsung 980 Pro 1TB (Games_1) \| Samsung 970 Evo 1TB (Games_2)
Display(s)	Asus XG27AQM 240Hz G-Sync Fast-IPS \| Gigabyte M27Q-P 165Hz 1440P IPS \| Asus 24" IPS (portrait mode)
Case	Lian Li PC-011D XL \| Custom cables by Cablemodz
Audio Device(s)	FiiO K7 \| Sennheiser HD650 + Beyerdynamic FOX Mic
Power Supply	Seasonic Prime Ultra Platinum 850
Mouse	Razer Viper v2 Pro
Keyboard	Corsair K65 Plus 75% Wireless - USB Mode
Software	Windows 11 Pro 64-Bit

System Name	HP Omen 17
Processor	i7 7700HQ
Memory	16GB 2400Mhz DDR4
Video Card(s)	GTX 1060
Storage	Samsung SM961 256GB + HGST 1TB
Display(s)	1080p IPS G-SYNC 75Hz
Audio Device(s)	Bang & Olufsen
Power Supply	230W
Mouse	Roccat Kone XTD+
Software	Win 10 Pro

System Name	[WIP]
Processor	Intel Pentium G3420 [i7-4790K SOON(tm)]
Motherboard	MSI Z87-GD65 Gaming
Cooling	[Corsair H100i]
Memory	G.Skill TridentX 2x8GB-2400-CL10 DDR3
Video Card(s)	[MSI AMD Radeon R9-290 Gaming]
Storage	Seagate 2TB Desktop SSHD / [Samsung 256GB 840 PRO]
Display(s)	[BenQ XL2420Z]
Case	[Corsair Obsidian 750D]
Power Supply	Corsair RM750
Software	Windows 8.1 x64 Pro / Linux Mint 15 / SteamOS

System Name	EVA-01
Processor	Intel i7 13700K
Motherboard	Asus ROG Maximus Z690 HERO EVA Edition
Cooling	ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory	PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s)	Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage	Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s)	Asus ROG SWIFT OLED PG42UQ
Case	Thermaltake Core P3 TG
Audio Device(s)	Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply	be quiet DARK POWER PRO 12 1500W
Mouse	ROG STRIX Impact Electro Punk
Keyboard	ROG STRIX Scope TKL Electro Punk
Software	Windows 11

NZXT Announces H630 Ultra-Tower Chassis

CaseLabs Rep

~Technological Technocrat~

CaseLabs Rep

ASIC Engineer

CaseLabs Rep

I still do pencil mods

New Member

ASIC Engineer

ASIC Engineer

ASIC Engineer

not-so supermod

ASIC Engineer

not-so supermod

CaseLabs Rep

ASIC Engineer

CaseLabs Rep