Bossweed16pipes
New Member
- Joined
- Apr 20, 2006
- Messages
- 47 (0.01/day)
- Location
- Montevideo
Processor | Athlon X2 3800@2.5Ghz |
---|---|
Motherboard | ASUS M2N SLI Deluxe |
Cooling | Zalman CNPS 9550AM2 nForce edition |
Memory | 2 GB DDR2 Supertalent 800@1000Mhz DC |
Video Card(s) | Sapphire X1900XT |
Storage | 2x 250Gb Hitachi Sata2 Raid 0 + 80Gb WD Ide7200Rpm |
Display(s) | Viewsonic VX922 |
Case | Custom case |
Audio Device(s) | Onboard SoundMax audio |
Power Supply | PK 780W |
To view this case mod, go here.
Specs:
A64X2 3800 @2.5Ghz // Zalman CNPS9500 // Asus M2N SLI Deluxe // 2GB DDR2 SuperTalent DC 800 @1000mhz // X1900XT // 2x250Gbs Hitachi sata2 Raid0 + 80Gbs WD // PK 780W // VX922 // Logitech G7 // RumblePad2 Wireless
Mods:
Not much for now, it aint a gamermod. Just painted it black in a car paint shop and take out the 3 1/2 bay plates and replaced with a plastic cover.
This was a really old case from the pentium 1 era and I bought it 7 years ago really cheap cause it didnt have the side panel. Its a generic brand, the only thing from Antec is the front badge
. I would put a acrilic panel on it mostly to avoid getting the inside of the case dirty. Another thing that would look good is painting the interior of the case, black too.






Specs:
A64X2 3800 @2.5Ghz // Zalman CNPS9500 // Asus M2N SLI Deluxe // 2GB DDR2 SuperTalent DC 800 @1000mhz // X1900XT // 2x250Gbs Hitachi sata2 Raid0 + 80Gbs WD // PK 780W // VX922 // Logitech G7 // RumblePad2 Wireless
Mods:
Not much for now, it aint a gamermod. Just painted it black in a car paint shop and take out the 3 1/2 bay plates and replaced with a plastic cover.
This was a really old case from the pentium 1 era and I bought it 7 years ago really cheap cause it didnt have the side panel. Its a generic brand, the only thing from Antec is the front badge

Last edited by a moderator: