- Joined
- Oct 9, 2007
- Messages
- 47,622 (7.44/day)
- Location
- Dublin, Ireland
System Name | RBMK-1000 |
---|---|
Processor | AMD Ryzen 7 5700G |
Motherboard | Gigabyte B550 AORUS Elite V2 |
Cooling | DeepCool Gammax L240 V2 |
Memory | 2x 16GB DDR4-3200 |
Video Card(s) | Galax RTX 4070 Ti EX |
Storage | Samsung 990 1TB |
Display(s) | BenQ 1440p 60 Hz 27-inch |
Case | Corsair Carbide 100R |
Audio Device(s) | ASUS SupremeFX S1220A |
Power Supply | Cooler Master MWE Gold 650W |
Mouse | ASUS ROG Strix Impact |
Keyboard | Gamdias Hermes E2 |
Software | Windows 11 Pro |
Here are the first pictures of a custom-design PCB for AMD's 28 nm "Hawaii" silicon. Pictured below is a pallet (a set of two uncut PCBs that are just punched, wired and stacked) of the MSI Radeon R9 290X Lightning. It exposes both the obverse and reverse sides of the PCB. MSI is taking no chances in giving "Hawaii" a strong electrical muscle, given that it's quite possibly the most power hungry GPU out there (even if not the GPU with the most transistors).
The MSI Radeon R9 290X Lightning PCB features a 15+2 phase VRM that draws power from a trio of power connectors, which is a first for single-GPU graphics cards. These include two 8-pin connectors, and a 6-pin. One can also make out three 4-pin fan connectors, and a few voltage measurement points. Display connectors include a pair of piggy-backed DVI connectors, and the usual DisplayPort and HDMI fare. The PCB overall, appears to be a good centimeter taller than what constitutes as "full-height" for add-on cards. The extra height creates room for a BIOS switch, some VRM circuitry, and the power connectors.
Our recent conversations with hardware vendors in Hong Kong indicate a late-December to early-January timeline for custom-design R9 290 series graphics cards. It could mean that either AIB partners are rationing their custom-design cards over to "X'mas" markets, or that the custom-design R9 290 series cards really will skip the Christmas shopping season.
View at TechPowerUp Main Site
The MSI Radeon R9 290X Lightning PCB features a 15+2 phase VRM that draws power from a trio of power connectors, which is a first for single-GPU graphics cards. These include two 8-pin connectors, and a 6-pin. One can also make out three 4-pin fan connectors, and a few voltage measurement points. Display connectors include a pair of piggy-backed DVI connectors, and the usual DisplayPort and HDMI fare. The PCB overall, appears to be a good centimeter taller than what constitutes as "full-height" for add-on cards. The extra height creates room for a BIOS switch, some VRM circuitry, and the power connectors.


Our recent conversations with hardware vendors in Hong Kong indicate a late-December to early-January timeline for custom-design R9 290 series graphics cards. It could mean that either AIB partners are rationing their custom-design cards over to "X'mas" markets, or that the custom-design R9 290 series cards really will skip the Christmas shopping season.
View at TechPowerUp Main Site