- Joined
- May 14, 2004
- Messages
- 27,944 (3.71/day)
Processor | Ryzen 7 5700X |
---|---|
Memory | 48 GB |
Video Card(s) | RTX 4080 |
Storage | 2x HDD RAID 1, 3x M.2 NVMe |
Display(s) | 30" 2560x1600 + 19" 1280x1024 |
Software | Windows 10 64-bit |
To view this case mod, go here.
Specs:
P3 Celeron Tualatin 1200AOpen MX3S-T mobo512 MB SDRAMSamsung Spinpoint 160 GBRADEON 9600 Pro
Mods:
Picked up this old amplifier case from the electronics dump, removed everything, put a plexi sheet with mobo mounting standoffs on the bottom. The PSU is a standard ATX PSU which was selected for its small PCB size. The RADEON is mounted with a 90° AGP riser card (ebay, a long time ago, ~$35).
Silence was the most important criteria when building this case.<br /><ul><li>All fans are quiet Panaflos or similar and run at 5V/7V.</li><li>The video card's fan power is disconnected.</li><li>The Samsung HDD (very quiet already) rests on foam to reduce seek noise.</li></ul>
Specs:
P3 Celeron Tualatin 1200AOpen MX3S-T mobo512 MB SDRAMSamsung Spinpoint 160 GBRADEON 9600 Pro
Mods:
Picked up this old amplifier case from the electronics dump, removed everything, put a plexi sheet with mobo mounting standoffs on the bottom. The PSU is a standard ATX PSU which was selected for its small PCB size. The RADEON is mounted with a 90° AGP riser card (ebay, a long time ago, ~$35).
Silence was the most important criteria when building this case.<br /><ul><li>All fans are quiet Panaflos or similar and run at 5V/7V.</li><li>The video card's fan power is disconnected.</li><li>The Samsung HDD (very quiet already) rests on foam to reduce seek noise.</li></ul>
Last edited: