- Joined
- Jan 6, 2007
- Messages
- 345 (0.05/day)
- Location
- suffolk uk
| Processor | Core 2 duo - e8400 @ 3ghz |
|---|---|
| Motherboard | Asus P5k-e |
| Cooling | 1 pumps 2 blocks 2 rads 10x 120mm fans |
| Memory | 4GB - OCZ PC2-8500 1066mhz (4-4-4-15) |
| Video Card(s) | BFG 8800gts |
| Storage | 1x Seagate Barracuda - 160gb SATAII |
| Display(s) | 19" tft |
| Case | Mozart TX |
| Audio Device(s) | X-FI |
| Power Supply | 700w coolermaster |
| Software | xp home |
To view this case mod, go here.
Specs:
cpu - Intel core 2 duo E6600 overclocked to 3.683,
Memory - OCZ DDR2-800 (444-12),
Gfx card - BFG 8800gts overclocked slightly,
Motherboard - ABIT AW9d-MAX (x975 chipset),
PSU - Hyper Type-R 580w modular,
Soundcard - X-fi,
Akasa UV black lights,
Hard drives - 2x Seagate Barracuda ~ RAID 0,
2x cd - rom's,
Case - A380 clio - 2x 250mm fans
Mods:
just fitted a cpu watercooling setup using XSPC gear, but didn't want to fit a standard kit and be done with it. So I took my case and used a 79k tank cutter to cut the top of the case to fit an additional rad and 120mm fan at the top. Also made a hole to fit a danger den fillport. See the pictures.
Water cooling equipment - XSPC extreme x2o waterblock, 1x rs-120 xspc rad, 1x rs-120s rad, xspc 1/2" tubing, danger den fillport, Feser UV blue coolant, xspc 400 pump and resi. The new stuff replaced a Artic cooler pro 7 and reduced the cpu temp by 13 deg C. Additional cooling provided by 2x 120mm fans, 2x 250mm fans. OCZ xtc memory cooler. case temp 6 deg C. over room temp. Still got to tidy the wires up and fit fan guards.
Specs:
cpu - Intel core 2 duo E6600 overclocked to 3.683,
Memory - OCZ DDR2-800 (444-12),
Gfx card - BFG 8800gts overclocked slightly,
Motherboard - ABIT AW9d-MAX (x975 chipset),
PSU - Hyper Type-R 580w modular,
Soundcard - X-fi,
Akasa UV black lights,
Hard drives - 2x Seagate Barracuda ~ RAID 0,
2x cd - rom's,
Case - A380 clio - 2x 250mm fans
Mods:
just fitted a cpu watercooling setup using XSPC gear, but didn't want to fit a standard kit and be done with it. So I took my case and used a 79k tank cutter to cut the top of the case to fit an additional rad and 120mm fan at the top. Also made a hole to fit a danger den fillport. See the pictures.
Water cooling equipment - XSPC extreme x2o waterblock, 1x rs-120 xspc rad, 1x rs-120s rad, xspc 1/2" tubing, danger den fillport, Feser UV blue coolant, xspc 400 pump and resi. The new stuff replaced a Artic cooler pro 7 and reduced the cpu temp by 13 deg C. Additional cooling provided by 2x 120mm fans, 2x 250mm fans. OCZ xtc memory cooler. case temp 6 deg C. over room temp. Still got to tidy the wires up and fit fan guards.
Last edited by a moderator:
