[Case Gallery] Bio-Hazard (Xaser 3)

[grifter29]

To view this case mod, go here.



Specs:
Thermaltake Xaser 3 super tower full atx, p4 3.2 ghz chip overclocked to a 3.6ghz, 4 gis sys mem at cas 1.5 pc 3200 ddr, asus p4p 800 e deluxe, ati x850 256 mg ddr3,round cables 7 in 1 floppy drive, custom xp ui

Mods:
bio hazard logo, water cooling in the process not compete yet waiting for last componet from thermal take, custom ui screens and custom front end for internal switches and lights

 

[HeavyH20]

One word: cable management. Needs a bit of tidying up. Take a peak at some of the systems posted. There are some amazingly clean wiring jobs. Go look at the CrystalClear system for a good example. Definitely the right direction, though. Nice work on drilling the side panel for the extra fan.

 

[wtf8269]

Eh, Hardcano 9's have an insane amount of wires. They require like three wires per fan, it's insane. Although I do believe he could do better, but it's going to be hard with how many wires that fan controller uses.

 

[grifter29]

uv liquid

uv liquid
is it a good idea or a bad idea?

 

[DR.Death]

nice and ya it needs to be cleed up a bit but other then that it looks good keep it up

 

[wtf8269]

uv liquid
is it a good idea or a bad idea?

By that do you mean water cooling with UV dye or painting bits and pieces with UV paint?

 

[grifter29]

By that do you mean water cooling with UV dye or painting bits and pieces with UV paint?

Both of them actually

 

[wtf8269]

I wouldn't go water cooling with a case like that, it's too air cooling oriented. As far as UV paint goes, go for it, just don't paint the entire frame of the case some UV color, I hate that.

 

[grifter29]

clean up the wires the best that they will go gonna look at a new psu that has less wires i have an extra some i don't use.

 

[wtf8269]

Try routing the wires behind the motherboard, cut a hole or two if you have to. Lengthening wires in order to route them in a more tucked away place helps too.

 

[grifter29]

Try routing the wires behind the motherboard, cut a hole or two if you have to. Lengthening wires in order to route them in a more tucked away place helps too.

i was told that was bad if my computer arcs. or is that bullshit

 

[wtf8269]

No no no I meant behind the motherboard mount. Not actually behind the motherboard itself. Like this:

As you can see I had to cut a 2" hole in order to get all the wires behind there.

 

[grifter29]

No no no I meant behind the motherboard mount. Not actually behind the motherboard itself. Like this:

As you can see I had to cut a 2" hole in order to get all the wires behind there.

allrighty i understand what you mean now thats a friggin great idea ill do that gotta get a bit to drill the hole im looking at having my water cooling tubes running to the outside of the case found this nice water cooler mount from frozenpc

give me a day and i should have cut the holes for the wires.

 

[Spinal C]

woot somebody with the same case as me, nice mod there cheif

 

[Vmaster]

VISIT MY THERMALTAKE XASER III MOD IN http://www.victormaster.com.ar

 

[Zalmann]

VISIT MY THERMALTAKE XASER III MOD IN http://www.victormaster.com.ar

Nice, but you also need to do a bit of tidying up with the cabling IMO.

 

[tzitzibp]

checkout my xaser case http://www.techpowerup.com/gallery/1155.html