SRoode
New Member
- Joined
- Jun 9, 2007
- Messages
- 32 (0.01/day)
- Location
- Indianapolis, IN
| Processor | Intel Q6600 (G0) |
|---|---|
| Motherboard | Abit IP35 Pro |
| Cooling | Danger Den 1/2" Tubed System |
| Memory | 2GB Crucial Ballistix DDR2 800 MHz (4-4-4-12) |
| Video Card(s) | eVGA 8800GT, Themaltake DuOrb Cooling (OC'd to 740/1835/1950) |
| Storage | 74GB Raptor, 300GB Seagate |
| Display(s) | Dell 2001FP |
| Case | Danger Den Acrylic Case |
| Audio Device(s) | Onboard |
| Power Supply | Corsair 620W Modular |
| Software | WinXP Pro |
To view this case mod, go here.
Specs:
AMD X2 4400+ (OC'ed to 2400)
ASUS A8NE-SLI
2GB Patriot LL DDR400 (2-3-2-5)
BFG 7800GT (OC'ed to 475/1275)
Mods:
Replaced Stock NB Heatsink, Custom Water Cooled (Swiftech MCP350 Pump, Swiftech Waterblock, Danger Den Black Ice Extreme 120.3 Radiator, Danger Den NV-78 Video Card Cooler, Danger Den Fillport), Sleeved and hid all cables, Cut 3 120mm holes on top of case to mount radiator fans.
Well, it may be a couple of years old, but it's still serving me well. This is my 1st watercooled project, and I will never go back to air. I like the green/blue compliment, and I like how quiet it is. You'll notice from my screenshot that temps hit around 50/51 full load (since I watercool both the CPU and the Video Card, I actually get more heat with only one ortho and one rthdribl running concurrently... two orthos slow the video down). That's because I have all fans at minimum speed (I can hear the Raptor banging around more than the fans). If I bring them up to full speed, full load temps drop to about 45-46C. The system idles at about 33C. Anyway, it's my 1st attempt, it's a couple years old, but it's still great!
Specs:
AMD X2 4400+ (OC'ed to 2400)
ASUS A8NE-SLI
2GB Patriot LL DDR400 (2-3-2-5)
BFG 7800GT (OC'ed to 475/1275)
Mods:
Replaced Stock NB Heatsink, Custom Water Cooled (Swiftech MCP350 Pump, Swiftech Waterblock, Danger Den Black Ice Extreme 120.3 Radiator, Danger Den NV-78 Video Card Cooler, Danger Den Fillport), Sleeved and hid all cables, Cut 3 120mm holes on top of case to mount radiator fans.
Well, it may be a couple of years old, but it's still serving me well. This is my 1st watercooled project, and I will never go back to air. I like the green/blue compliment, and I like how quiet it is. You'll notice from my screenshot that temps hit around 50/51 full load (since I watercool both the CPU and the Video Card, I actually get more heat with only one ortho and one rthdribl running concurrently... two orthos slow the video down). That's because I have all fans at minimum speed (I can hear the Raptor banging around more than the fans). If I bring them up to full speed, full load temps drop to about 45-46C. The system idles at about 33C. Anyway, it's my 1st attempt, it's a couple years old, but it's still great!
Last edited by a moderator:
