ENERMAX Launches LIQTECH II, Universal AIO Liquid Cooler with TDP 500+ Watts

[btarunr]

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces the launch of a new all-in-one liquid cooler series, LIQTECH II. Responding the market demand of cooling solution for high-end CPUs, LIQTECH II can deliver enthusiast-grade cooling capacity of 500+ watts (TDP) and is compatible with both Intel and AMD sockets (except AMD sTR4).

Furthermore, certified by main motherboard makers (ASRock, ASUS, Gigabyte, and MSI), LIQTECH II can support the latest addressable RGB lighting synchronization with advanced motherboards featuring addressable RGB headers (pin assignment: 5V/D/-/G) to create dynamic visual effects. LIQTECH II is perfect for overclocked systems, image editing workstations, and high-end gaming machines.



Extreme High Cooling Capacity of TDP 500+ Watts for Intel and AMD CPUs
LIQTECH II, a universal Intel and AMD CPU cooler series, has extremely high cooling capacity of TDP 500+ watts, which can also easily handle a large amount of heat generated by the heavily overclocked CPUs. Thanks to ENERMAX patented SCT (Shunt Channel Technology) cold plate design to deliver 30% more heat exchange efficiency, LIQTECH II can offer superior, reliable cooling performance. Besides, LIQTECH Il comes with the powerful ENERMAX EF1 pump, equipped with a high-efficiency ceramic nano PI bearing, can produce high flow rate up to 450 L/h, which is 7 times stronger than its peers.

Premium Addressable RGB Water Block
The water block of LIQTECH II features a premium acrylic cover and a vivid Aurabelt, an exquisite LED lighting design to provide unique visual experience. Moreover, LIQTECH II offers 2 ways to control the RGB lighting effects. Users can program preferred lighting via RGB motherboard software to match the colors with other RGB components. Or, users can use the included control box to select preferred lighting effects (10 pre-set effects), colors, brightness and speed.

LIQTECH II series comes in 3 different radiator sizes: 360, 280 and 240mm; meanwhile, the new lineup also has a special edition of 360mm radiator in white. LIQTECH II includes universal mounting kits, supporting the latest sockets of Intel (LGA2066/2011-3/2011/1366/1156/ 1155/1151/1150) and AMD (AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1).

LIQTECH II will be available at retail in early December of 2018.

For more information, visit this page.

View at TechPowerUp Main Site

 

[randomUser]

Sooo, i9-9900K should be ice cold at full load at 5GHz all core OC, because it "only" draws like 250W of power, so thats only half the capacity of this cooler, right??
I somewhat doubt it.

But i hope reviews prove me wrong.

 

[Flyordie]

Sooo, i9-9900K should be ice cold at full load at 5GHz all core OC, because it "only" draws like 250W of power, so thats only half the capacity of this cooler, right??
I somewhat doubt it.

But i hope reviews prove me wrong.

I have the TR4 version.

Its biggest pitfall is the fans. They NEED to improve the fans or reduce the radiator thickness. Even my SP120s mounted to it have issues pushing air through it. (regarding the 240mm version)

They need to go to a push/pull fan setup if they intend to keep the rads that thick.

 

[Claudio]

Sooo, i9-9900K should be ice cold at full load at 5GHz all core OC, because it "only" draws like 250W of power, so thats only half the capacity of this cooler, right??
I somewhat doubt it.

But i hope reviews prove me wrong.

same my thought..
I had a Corsair H110 on a 9900k with OC 5ghz on all cores (about 185W). it is now under a custom loop and temperatures have dropped by around 15 degrees. Under heavy bench, I went from 90 to 75 degrees. ...And anyway H110 has a 280mm radiator

 

[John Naylor]

I have the TR4 version.

Its biggest pitfall is the fans. They NEED to improve the fans or reduce the radiator thickness. Even my SP120s mounted to it have issues pushing air through it. (regarding the 240mm version)

They need to go to a push/pull fan setup if they intend to keep the rads that thick.

From the pics, they honestly don't look all that think.... 25 - 30mm ? a 1250 rpm, normal SP fan is more than enough for a copper radiator. I use 1250 rpm fans on 60mm rads all the time and they never break 600 rpm

 

[GlacierNine]

From the pics, they honestly don't look all that think.... 25 - 30mm ? a 1250 rpm, normal SP fan is more than enough for a copper radiator. I use 1250 rpm fans on 60mm rads all the time and they never break 600 rpm

The issue isn't primarily the thickness of the radiator, it's the fin density. Most thick rads (45mm+) have lower fpi, because they don't need to pack in the fins like crazy in order to increase surface area and heat transfer capacity. That makes them more suitable for lower static pressure fans.

Sooo, i9-9900K should be ice cold at full load at 5GHz all core OC, because it "only" draws like 250W of power, so thats only half the capacity of this cooler, right??
I somewhat doubt it.

But i hope reviews prove me wrong.

The bottleneck isn't the amount of dissipation possible with the surface area of the radiator, it's how quickly heat can be transferred from the CPU, to the STIM, to the Heatspreader, to the TIM, to the cold plate, to the fins, to the coolant, to the radiator, to the air.

If you want to get even more fine-grained, it's also worth considering that the silicon in the 9900K is thicker than it was in the 8700K - we've seen temperature reductions when Der8auer sanded down the silicon of the die to make it thinner, so even the silicon itself can cause a bottleneck in thermal performance.

Regardless, if any one of those transfers occurs slowly, the heat will build up at that point and temps will start to increase. If you want the absolute best possible cooling, the thing to do is reduce the number of interfaces and improve their quality - that was the goal behind the Ncore V-1 for example, which was a waterblock that replaced the CPU heatspreader, thus removing an entire layer of thermal paste and a heatspreader from the chain.

Improving the capacity of the radiator will always have an effect because heat transfer occurs slightly faster if there's a greater delta between the temperatures of two objects - if your radiator gets rid of heat faster then it will be colder and the transfer to it will be that slight bit more rapid, but there's a limit to how effective this approach is if there is a bottleneck elsewhere.

 

[Berfs1]

I have the TR4 version.

Its biggest pitfall is the fans. They NEED to improve the fans or reduce the radiator thickness. Even my SP120s mounted to it have issues pushing air through it. (regarding the 240mm version)

They need to go to a push/pull fan setup if they intend to keep the rads that thick.

If you are spending that much money on Threadripper, it’s kind of expected that you can afford extra fans of your choice. In addition, why aren’t you using the stock fans? Enermax provided specific fans for a reason... I mention this because I doubt you actually tested the Enermax fans for performance before going all Corsair because “they are premium”..

 

[Ruru]

500W cooling capacity with an toy-AIO with an aluminium radiator, yeah sure.

 

[GlacierNine]

500W cooling capacity with an toy-AIO with an aluminium radiator, yeah sure.

Using copper or alu doesn't really affect cooling capacity in radiators at all.

On an air cooler, sure, better thermal conductivity in a fin means that the heat is more evenly conducted across the whole fin, and there arent hot spots by the heatpipes and cold spots at the edges.

But in a radiator, no part of any fin is far enough away from the heat source (the water) to be at a measurably different temperature to any other part of the fin. That fact makes alu and copper pretty much identical in terms of performance.

The reason you use copper instead of alu in radiators is to prevent galvanic corrosion, and AIOs have that covered with fluid additives - they can afford to cover it this way because when you build every part of the system, you can also control the material composition of the parts and ensure nothing funky goes on with your alloys, fittings, plating etc.

Its no secret that AIOs don't perform quite as well as open loops, but that's down to almost everything BUT the radiator materials. Thickness, fin density, pump power, cold plate size and fin density, or even just a lower liquid volume in the loop - liquid temp rises more slowly the more liquid there is to heat up in the first place, and very few places test AIOs long enough for loop temperatures to stabilize.

 

[Ruru]

Using copper or alu doesn't really affect cooling capacity in radiators at all.

On an air cooler, sure, better thermal conductivity in a fin means that the heat is more evenly conducted across the whole fin, and there arent hot spots by the heatpipes and cold spots at the edges.

But in a radiator, no part of any fin is far enough away from the heat source (the water) to be at a measurably different temperature to any other part of the fin. That fact makes alu and copper pretty much identical in terms of performance.

The reason you use copper instead of alu in radiators is to prevent galvanic corrosion, and AIOs have that covered with fluid additives - they can afford to cover it this way because when you build every part of the system, you can also control the material composition of the parts and ensure nothing funky goes on with your alloys, fittings, plating etc.

Its no secret that AIOs don't perform quite as well as open loops, but that's down to almost everything BUT the radiator materials. Thickness, fin density, pump power, cold plate size and fin density, or even just a lower liquid volume in the loop - liquid temp rises more slowly the more liquid there is to heat up in the first place, and very few places test AIOs long enough for loop temperatures to stabilize.

My point is that even my custom loop probably couldn't handle 500W without the fans flying off. I had an i7-5820K @ 4.5GHz 1.36V with 30x240mm and 45x240mm Alphacool rads.

 

[eidairaman1]

I have the TR4 version.

Its biggest pitfall is the fans. They NEED to improve the fans or reduce the radiator thickness. Even my SP120s mounted to it have issues pushing air through it. (regarding the 240mm version)

They need to go to a push/pull fan setup if they intend to keep the rads that thick.

Higher static pressure then

 

[Vayra86]

I like how Enermax has a white version of many things.

I've never managed to get a nice all white build together yet, too many sacrifices and too little choice to get there...

 

[eidairaman1]

I like how Enermax has a white version of many things.

I've never managed to get a nice all white build together yet, too many sacrifices and too little choice to get there...

Be nice if they had a spectrum of paints/plastic molds, RGB has that, why cant cases have full colors?

 

[Flyordie]

If you are spending that much money on Threadripper, it’s kind of expected that you can afford extra fans of your choice. In addition, why aren’t you using the stock fans? Enermax provided specific fans for a reason... I mention this because I doubt you actually tested the Enermax fans for performance before going all Corsair because “they are premium”..

Actually, both fans failed within 20 days of use. I did have the SP120s in push and the Enermax fans in pull. Enermax fans started failing so I dropped them out of use. The bearings were making a horrible grinding noise. So, I am left with just the SP120s on push.

From the pics, they honestly don't look all that think.... 25 - 30mm ? a 1250 rpm, normal SP fan is more than enough for a copper radiator. I use 1250 rpm fans on 60mm rads all the time and they never break 600 rpm

30mm with a very dense fin array (the 280 and 360 rads are thinner.

 

[John Naylor]

The issue isn't primarily the thickness of the radiator, it's the fin density. Most thick rads (45mm+) have lower fpi, because they don't need to pack in the fins like crazy in order to increase surface area and heat transfer capacity. That makes them more suitable for lower static pressure fans.

That was my guess... when ya go aluminum...

a) Lower heat transfer efficiency will usally mean bigger fpi.
b) The low efficiency, higher fpi, low pump flow and, eventually crud in the fins from galvanic corrosion, means more oomph needed from fans.

But in a radiator, no part of any fin is far enough away from the heat source (the water) to be at a measurably different temperature to any other part of the fin. That fact makes alu and copper pretty much identical in terms of performance..

But not "in real life"

Its no secret that AIOs don't perform quite as well as open loops, but that's down to almost everything BUT the radiator materials. Thickness, fin density, pump power, cold plate size and fin density, or even just a lower liquid volume in the loop - liquid temp rises more slowly the more liquid there is to heat up in the first place, and very few places test AIOs long enough for loop temperatures to stabilize

That doesn't explain why the CLCs get trashed by the Swiftech and EK Units. Cold plate size ... on same CPU ? Thickness ... still gotta fit in the case ? Volume ? No significant differences at all between Swiftech / EK units. Yes, of course they often increase fpi and fan rpm... to make up for the decreased transfer efficiency, weak pumps and eventual clogging. The reason they need more surface area and more rpm to even get within 5C of the copper units. is because of the low flow and conductivity.

 

[GlacierNine]

That was my guess... when ya go aluminum...

a) Lower heat transfer efficiency will usally mean bigger fpi.
b) The low efficiency, higher fpi, low pump flow and, eventually crud in the fins from galvanic corrosion, means more oomph needed from fans.



But not "in real life"



That doesn't explain why the CLCs get trashed by the Swiftech and EK Units. Cold plate size ... on same CPU ? Thickness ... still gotta fit in the case ? Volume ? No significant differences at all between Swiftech / EK units. Yes, of course they often increase fpi and fan rpm... to make up for the decreased transfer efficiency, weak pumps and eventual clogging. The reason they need more surface area and more rpm to even get within 5C of the copper units. is because of the low flow and conductivity.

Yes in real life. Infinite Fin Length is a term you should familiarise yourself with.

TPU reviewed the EK MLC Phoenix and it was 3c cooler with a 360mm rad than a fractal celsius S24 - a system with an alu radiator.

An entire extra fan's worth of radiator and it only achieved 3C cooler.

The rest of your post is just barely coherent gibberish.

Alu rads are not appreciably worse than copper ones, all else being equal. The thermal conductivity of one material vs the other does not make heat more efficiently spread over the ~1cm depth of a radiator fin, to a degree that would make a difference.

If your radiator had fins that were 4 inches long, it would make a big difference, but your radiator does not have fins that long, and so the heat does not end up unevenly distributed.

 

[Berfs1]

Actually, both fans failed within 20 days of use. I did have the SP120s in push and the Enermax fans in pull. Enermax fans started failing so I dropped them out of use. The bearings were making a horrible grinding noise. So, I am left with just the SP120s on push.



30mm with a very dense fin array (the 280 and 360 rads are thinner.

Well, all four of my normal Enermax fans from my Liqmax II 240s