Spire Announces X2 Taraxx Double Tempered Glass Gaming PC Case

[btarunr]

Spice announces the TARAXX tempered glass case. The TARAXX PC chassis with left and right side panels of 4 mm tempered glass allows for optimum space within the case. Furthermore, within the 1.2 mm SPCC black coated structure contains a large CPU cooler clearance of 135 mm for large cooling fans and a 350 mm graphics card clearance for a large graphics card.

enclosure is thus suited for various PC components whilst maintaining supreme airflow and intricate cable management. Included are also 1x USB 3.0 & 2x USB 2.0 x2 and HD Audio in the front for high quality audio purposes. Additionally to the spacious case is room for the standard or extended ATX power supply on the bottom of this structure. All in all, a great asset to have in your PC setup.



Features:

• ATX Gaming Case
• 1.2 mm SPCC all black coated
• 2*3.5 inch, 2x 2.5 inch and 7xPCI slots
• Left & Right side panels 4 mm tempered glass
• Graphic Card Clearance: 350 mm Max.
• CPU cooler clearance: 135 mm Max.
• 2 years manufacturer warranty

MSRP: €79,95 / $89,95 (including VAT). For more information, visit the product page.

View at TechPowerUp Main Site

 

[ArbitraryAffection]

I really like the look of this but 135mm height for CPU cooler is really restrictive. That's an 80mm fan at the back right? Most decent 120mm air cooler towers are like 150mm+ tall. :x 'suppose you could use an AIO I guess

 

[Animalpak]

Im gonna take this case in serious consideration for my z390 build.

The style is like Cougar Conquer and InWin D-Frame.

Already available but still nobody have it to review.

 

[Vayra86]

So, you have the bulkiest case of 2019 and you can't even fit an NH-D15 in it.

Well played! Very design much thought.

At least aesthetically its nice.

 

[ZoneDymo]

there seems to be some panel gaps

 

[Octavean]

Looks a lot like a Cooler Master Mastercase MC500 series case,....

 

[Sp33d Junki3]

I really like the look of this but 135mm height for CPU cooler is really restrictive. That's an 80mm fan at the back right? Most decent 120mm air cooler towers are like 150mm+ tall. :x 'suppose you could use an AIO I guess

There is quite a few good coolers that's below 135mm. Plus this case is more for watercooling, than air.

 

[bogami]

I like the thing very much. I think they could add more cavities for air flow , the air flow from the front and the top is very weak, and the power supply needs to capture air from the inside. it is small but also the PSU could be placed above at the front and further reduce the height . It represents a good challenge for space utilization . Mouding this casing came to my mind .

 

[Octavean]

Now that I take a closer look, I'm not sure I understand the airflow circuit since there seem to be no front fan air intakes. The AIO 240mm cooler is mounted on the motherboard plane with seemingly no air flow behind it.

 

[EarthDog]

Case is.......... not my style. ick.

I sure wish there was a way to simply click through all images in an article.... back and click on new, back and click on new... why not a carousel or something with arrows?

 

[Octavean]

Case is.......... not my style. ick.

I sure wish there was a way to simply click through all images in an article.... back and click on new, back and click on new... why not a carousel or something with arrows?

They have that option on the home page and on the subject page but not in the forums page.

 

[EarthDog]

Ahh, ty.. I don't read the news through the front page (why click to see the same thing in a different way).

 

[B-Real]

Im gonna take this case in serious consideration for my z390 build.

The style is like Cougar Conquer and InWin D-Frame.

Already available but still nobody have it to review.

z390? Worst choice of all.

 

[overvolted]

Put the damned glass on hinges.
The biggest annoyance of glass case panels is having to undo those 4 (usually half stripped) thumbscrews and not have the glass fall.
And then having to use glass cleaner from the finger prints every time you touch it.

 

[Vayra86]

Put the damned glass on hinges.
The biggest annoyance of glass case panels is having to undo those 4 (usually half stripped) thumbscrews and not have the glass fall.
And then having to use glass cleaner from the finger prints every time you touch it.

If the design is properly done, there is a rubber(ized) ring under the screw as well that will hold it in place. I can remove my 4 screws entirely and the glass pane will still 'hang' by those rings (Fractal Define C TG).

Finger prints, yes. Especially those on the inside Frankly after prolonged use I see only one big advantage of the glass pane, and that is being able to carefully examine how dusty it is inside and whether its time to clean. Even the RGB helps with that

I guess its a learning curve, that perfect rig

 

[overvolted]

If the design is properly done, there is a rubber(ized) ring under the screw as well that will hold it in place. I can remove my 4 screws entirely and the glass pane will still 'hang' by those rings (Fractal Define C TG).

Finger prints, yes. Especially those on the inside Frankly after prolonged use I see only one big advantage of the glass pane, and that is being able to carefully examine how dusty it is inside and whether its time to clean. Even the RGB helps with that

I guess its a learning curve, that perfect rig

The current piece of freaking garbage I have has those rubber grommets as well, but if you dont hold the glass when undoing the thumbscrews, you'll always wish you did. Believe me!

But I'm over that crap starting today....Behold!!!!

 

[John Naylor]

Too many angles for my taste

But I'm over that crap starting today....Behold!!!!

The Evolv X case and the MSI Titanium MoBo were two components that I was tempted to buy and just putting in my office to stare at.... aka nerd porn.

 

[Caring1]

Case is.......... not my style. ick.

I sure wish there was a way to simply click through all images in an article.... back and click on new, back and click on new... why not a carousel or something with arrows?

That would be too easy, I right click and open each in a new tab, that way I only have to click back and forth between tabs to compare pics.

 

[overvolted]

Too many angles for my taste
The Evolv X case and the MSI Titanium MoBo were two components that I was tempted to buy and just putting in my office to stare at.... aka nerd porn.

It's such a nice case. I was able to swap all my guts right over in maybe 40 minutes with no hassle whatsoever due to how modular the case is.
I'm really happy with it.

Something's wrong with all my RGB crap though. I have to figure out what I did wrong.
It's all out of whack, but I have time for that tonight. LOL

My Ryzen 7 1700 sits at 3700mhz and idles at 29c, and is 55c at full load.
Plenty of airflow and a lot less noise than before due to the way the doors seal.
GPU also stays nice and cool. No temperature issues whatsoever.

Next up I'm going to throw in a triple rad and hard tube it for fun.