King Kong Caselabs TX10

[Spirti1976]

To view this case mod, go here.



Specs:
CPU: Core i7 7820XMB: Gigabyte X299 Designare EXRAM: 32 Gb Corsair Dominator PlatinumGPU: Gigabyte GTX 1080 Ti Founders Edition SLISSD1: Corsair MP500 120Gb NVMeSSD2: WD Blue M.2 500 Gb SATA3HDD: 2x3 Tb WD RedSound card: Creative AE-5PSU: Seasonic Prime 1300W GoldCase: Caselabs TX10-VWatercooling: Aquacomputer, Watercool, Hardware Labs

Mods:
Not heavily modded, just drilled for pass-through adapters for minimalist aesthetics

Sorry for rotated pictures, seems like vertical pics are not displaying vertically.Hey everyone, I present you my latest case upgrade (and I guess it's a final case upgrade) - enormous CaseLabs TX10! I've always wanted a CaseLabs case but it was too expensive to bring it to my country, and I found this one NEW in a deadstock at one of the modding stores here for really really cheap. For such a case I tried to acquire the highest quality (thus mostly not mainstream) parts.Cables are made from scratch using AWG 15 wires and MDPC-X sleeving along with aluminum cable combs.Visible tubing is Mayhems 16 mm OD borosilicate glass.Fittings and pass-throughs by Barrow.Cooling features two independent loops driven by DDC 3.2 PWM pumps.Fans are spinning only at 500 RPM that's why I went for not expensive Arctic ones. Load temperatures don't exceed 40C on GPUs and 55C on CPU. Each loop has two Hardware Labs radiators.The build features UV and warm white lighting.I hope you like it, thanks for paying attention!

 

[als"alpine]

Here"s my baby,caselabs tx10-d,was lucky to get mr caselabs,(kevin keating)personal tx10-d,comes with 170mm top,6 cable pass through"s,4 removeable to swap out mounting plates,still in the middle of building it,spec"s asus x99 e-ws mb"s both sides,32gb dominator platinum,evga gtx1080ti kingpin on air with the cpu going under liquid,other side evga gtx1080ti ftw3 hydro copper,pair evga 1300 psu with cablemod cables,down side have get a couple rad mounts and a supermount made.

Here"s my baby,caselabs tx10-d,was lucky to get mr caselabs,(kevin keating)personal tx10-d,comes with 170mm top,6 cable pass through"s,4 removeable to swap out mounting plates,still in the middle of building it,spec"s asus x99 e-ws mb"s both sides,32gb dominator platinum,evga gtx1080ti kingpin on air with the cpu going under liquid,other side evga gtx1080ti ftw3 hydro copper,pair evga 1300 psu with cablemod cables,down side have get a couple rad mounts and a supermount made.