MetallicGear Announces the new NEO 520 Series: NEO-G, AIR & SILENT

[VSG]

Powered by Phanteks, MetallicGear today announced the release of three new design to the Neo series. The new ATX mid-towers provides uncompromised value and functionality in three different styles. The new Neo series includes the Neo Silent, Neo Air, and Neo-G. The Neo Silent is subtle and silent and comes with a sound insulation front panel to help reduce noise; the Neo Air comes with the MetallicGear's characteristic mesh design that offers high airflow performance and includes 2x Skiron 120 mm RGB fans; and the Neo-G features a decorative front panel with 2x Skiron 120 mm D-RGB fans. All three Neo mid-tower cases are compact and design to bring lots of innovation and features like vertical GPU mounting (bracket required), 280 mm radiator support in front, full size hardware support, and plenty of storage.



The NEO-G is a mid-tower case that sports a stylish front tempered glass panel that will be the highlight of your build. The NEO-G features a tempered glass side panel to showcase your hardware, space efficient design, clean cable management, and 2x MetallicGear Skiron 120 mm D-RGB fans.The compact mid-tower size of the NEO-G offers E-ATX motherboard support, plenty of storage and full-size hardware support to create a stunning build.


The NEO Air is a mid-tower case that sports a high airflow decorative mesh front panel for maximum performance and style. The NEO Air features a tempered glass side panel to showcase your hardware, space efficient design, clean cable management, and 2x MetallicGear Skiron 120 mm RGB fans.The compact mid-tower size of the NEO Air offers E-ATX motherboard support, plenty of storage and full-size hardware support to create a high performance build.


The NEO Silent is a mid-tower case that sports a sound dampened front panel to reduce noise from your build. The NEO Silent features a tempered glass side panel to showcase your hardware, space efficient design, clean cable management, and a MetallicGear Skiron 120 mm Black fan.The compact mid-tower size of the NEO Silent offers E-ATX motherboard support, plenty of storage and full-size hardware support to create a silent build.

NEO 520 Series Pricing:

• NEO Silent: $49.99
• NEO Air (Black/White): $59.99
• NEO-G: $69.99

All the new NEO 520 series cases will be available in September 2019.

View at TechPowerUp Main Site

 

[TheLostSwede]

Is it just me, or are we at a stage where the outside of the case is more important than the inside?
This is not specific about these models here, but it just struck me that the past few weeks of case news has mostly been about the external design, rather than the functionality and practical features of the case.

 

[AsRock]

Cases have been pretty much that or little about any thing else for a long time, which is why i am still after a new one still

 

[ZoneDymo]

Is it just me, or are we at a stage where the outside of the case is more important than the inside?
This is not specific about these models here, but it just struck me that the past few weeks of case news has mostly been about the external design, rather than the functionality and practical features of the case.

there are still cases that boast about the inside, pretty sure for example the Be Quiet cases are about that more.

that said, why does MetallicGear even include a freaking closed off front panel...stylish? if they say "for Maximum performance" on the mesh one, they should say "for Minimum performance" on the closed front one....

 

[bonehead123]

Is it just me, or are we at a stage where the outside of the case is more important than the inside?
This is not specific about these models here, but it just struck me that the past few weeks of case news has mostly been about the external design, rather than the functionality and practical features of the case.

Yes, apparently we are, as this is essentially what I been saying for, like, over a year now....

features......whahdatiz ??????

these look eerily similar to the ones released last week by nzxt, yes ?

 

[TheLostSwede]

Yes, apparently we are, as this is essentially what I been saying for, like, over a year now....

features......whahdatiz ??????

these look eerily similar to the ones released last week by nzxt, yes ?

Yeah, a lot of me-too/copy cat cases these days as well, very little innovation.
In fact, the internal construction seems to be getting worse, just so the case brands (as most of them are not manufacturers) can sell blinged out cases without increasing the cost too much.

 

[Th3pwn3r]

That neo air looks like it could perform decently.

 

[Sybaris_Caesar]

Yeah, a lot of me-too/copy cat cases these days as well, very little innovation.
In fact, the internal construction seems to be getting worse, just so the case brands (as most of them are not manufacturers) can sell blinged out cases without increasing the cost too much.

I for one am happy that there are copy-cats. "Hey look at that whats-a-not premium case maker with innovative feature looks exciting. But I don't need military grade toughness. I'll wait for cheap SECC steel copy from Thermaltake"

And I don't know what kind of innovation can be done to ATX cases anymore. Motherboard orientation? PSU placement? airflow orientation? Quiet/silent case designs? Psu shrouds? Cases with hot-swap? Transformer cases? Cases with roller/wheels?

I've said it before and will say it again, the most innovative cases today are ITX cases atm. And sadly copycats rarely copy them. Just generic cube cases that I fucking hate. Where's my Skyridge 4 Mini copycats, where's Dr Zaber Sentry copycats, where's Velka 5/3 copycats?

 

[TheLostSwede]

Sorry, but I would NEVER buy anything from Thermaltake. Call me snob if you want, but they make junk.

You might be right on the innovation part, but then why do we need so many new cases? There seems to be a dozen new models every month...

I actually miss some really old cases. Palo Alto Products made some of the best cases ever.
This is the "lesser" version, but have a look at how the motherboard is mounted. It was so easy to install the board in their cases.

Palo Alto Products PA-600 ATX Mid-Tower

www.anandtech.com

No-one has come up with anything like that since.
They also had really nice drive mounts, which none of their competitors had at the time.
I had their PA-810 for the longest of times, but unfortunately it only had space for two internal 3.5" drives.
Not my rig.

Now we have cases that aren't even deep enough to have proper PCIe card slots, instead you have a bracket on the rear of the case that's a pain in the ass to use compared to some of the solution that have come out over the years. Lian-Li had a really nice mechanical solution, but it was apparently way too costly. I'd be happy with serviceable thumb screws, but that's barely an option any more.

But by all means, let's get more crappy glass and plastic instead of something functional.

 

[Sybaris_Caesar]

Most of their cases are indeed junk but even gold can be found in the pile of rubble. And in third world countries like mine where beggars can't be choosers (price-wise and brand selection-wise) I'd get a Tt copy of premium case makers anyday.

Not every companies are releasing new products. Some are updating their old models with facelift, some are coming with new series. Some are just entering the market for the first time. Just tell TPU to NOT post case release news pieces (please don't), unless the rare case reviews it'll feel like case release has stopped.

That's innovation all right, that'll only help in 3-4 years (or whenever people upgrade). Not that I'm complaining but seems non-important just like psu covers and glass panels imho.

That can be explained by simple fact of economics. I just checked the back of my case. PCIe slot and IO panel are in same plane(?) (English is not my first language okay). Manufacturing what you're looking for isn't cost-effective imo. And I don't think case makers have very fat margins in the first place anyway. Wanna know other cost cutting measures? Non-replaceable stamped PCIe slot cover, side panel indentation (preggo belly?) for cable routing instead of proper spacing of the motherboard tray inside, no rubber grommet fpr cable routing holes, no fan dust cover etc.

Glass panels are the norm today cause they sell. People just don't hide away their cases under the desk anymore. With the lighting on individual components, along with good cable management, also good looking sleeved cables people wanna show off. I myself can't stand cases with glass front panels. Imo that's taking something too far.

Ultimately I can't foresee any big innovation in the ATX case scene unless Intel and AMD change the format/design of ATX boards, ATX power supply etc.

That's why I again iterate that ITX/SFF PCs hog all the innovation these days. Limited space/artificial limitation do wonders for the scene. Kinda like console limitations force devs to make innovative design choices.