- Joined
- Aug 19, 2017
- Messages
- 2,579 (0.97/day)
The upcoming graphics cards based on PCIe Gen5 standard will utilize the latest PCIe connector with double bandwidth of the previous Gen4 that we use today and bring a new power connector that the next generation of GPUs brings. According to the information exclusive to Igor's Lab, the new connector will be called the 12VHPWR and will carry as many as 16 pins with it. The reason it is called 12VHPWR is that it features 12 pins for power, while the remaining four are signal transmission connectors to coordinate the delivery. This power connector is supposed to carry as much as 600 Watts of power with its 16 pins.
The new 12VHPWR connector should work exclusively with PCIe Gen5 graphics cards and not be backward compatible with anything else. It is said to replace three standard 8-pin power connectors found on some high-end graphics cards and will likely result in power supply manufacturers adopting the new standard. The official PCI-SIG specification defines each pin capable of sustaining up to 9.2 Amps, translating to a total of 55.2 Amps at 12 Volts. Theoretically, this translates to 662 Watts; however, Igor's Lab notes that the connector is limited to 600 Watts. Additionally, the 12VHPWR connector power pins have a 3.00 mm pitch, while the contacts in a legacy 2×3 (6-pin) and 2×4 (8-pin) connector lie on a larger 4.20 mm pitch.
There are already implementations of this connector, and one comes from Amphenol ICC. The company has designed a 12VHPWR connector and listed it ready for sale. You can check that out on the company website.
View at TechPowerUp Main Site
The new 12VHPWR connector should work exclusively with PCIe Gen5 graphics cards and not be backward compatible with anything else. It is said to replace three standard 8-pin power connectors found on some high-end graphics cards and will likely result in power supply manufacturers adopting the new standard. The official PCI-SIG specification defines each pin capable of sustaining up to 9.2 Amps, translating to a total of 55.2 Amps at 12 Volts. Theoretically, this translates to 662 Watts; however, Igor's Lab notes that the connector is limited to 600 Watts. Additionally, the 12VHPWR connector power pins have a 3.00 mm pitch, while the contacts in a legacy 2×3 (6-pin) and 2×4 (8-pin) connector lie on a larger 4.20 mm pitch.
There are already implementations of this connector, and one comes from Amphenol ICC. The company has designed a 12VHPWR connector and listed it ready for sale. You can check that out on the company website.
View at TechPowerUp Main Site