TheLostSwede
News Editor
- Joined
- Nov 11, 2004
- Messages
- 18,051 (2.44/day)
- Location
- Sweden
| System Name | Overlord Mk MLI |
|---|---|
| Processor | AMD Ryzen 7 7800X3D |
| Motherboard | Gigabyte X670E Aorus Master |
| Cooling | Noctua NH-D15 SE with offsets |
| Memory | 32GB Team T-Create Expert DDR5 6000 MHz @ CL30-34-34-68 |
| Video Card(s) | Gainward GeForce RTX 4080 Phantom GS |
| Storage | 1TB Solidigm P44 Pro, 2 TB Corsair MP600 Pro, 2TB Kingston KC3000 |
| Display(s) | Acer XV272K LVbmiipruzx 4K@160Hz |
| Case | Fractal Design Torrent Compact |
| Audio Device(s) | Corsair Virtuoso SE |
| Power Supply | be quiet! Pure Power 12 M 850 W |
| Mouse | Logitech G502 Lightspeed |
| Keyboard | Corsair K70 Max |
| Software | Windows 10 Pro |
| Benchmark Scores | https://valid.x86.fr/yfsd9w |
The first mainstream Z690 boards have made an appearance online in the shape of ASUS' Prime Z690-P series. As with most of ASUS' Prime boards, these are fairly basic boards, but shouldn't leave the average user wanting for much, although ASUS has made a rather odd layout decision on these boards that we can't quite grasp.
The four models on display are the Prime Z690-P WiFi D4, Prime Z690-P D4, Prime Z690-P and Prime Z690M-Plus D4. The last model doesn't strictly belong to the Prime Z690-P family, but it follows a pretty similar overall design. The Prime Z690-P is obviously the only DDR5 SKU among the four boards, although from what we can tell, there are no other differences between it and the equivalent DDR4 model.
As a matter of fact, ASUS hasn't really changed too much compared to its Prime Z590-P series boards when it comes to the overall board layout, although the heatsinks have been refreshed with different logos and slightly different cutouts in them. However, the big change is the slot layout, where ASUS has gone for no less than four physical x16 PCIe slots, which doesn't make a whole lot of sense, considering the slot placement. The location closest to the CPU is taken up by an M.2 22110 slot, so the regular PCIe slots start one position down, with what should be a PCIe 5.0 x16 slot.
Where it all goes a bit strange is the next slot, which is another x16 slot, although only x4 electrically and most likely PCIe 3.0. This slot would be mostly unusable if a two slot or wider graphics card is being used. Next we have another M.2 slot, but a 2280 slot, which is followed by another x16 slot, which again appears to be a x4 electrically, then a x1 slot, which is shared with another M.2 22110 slot and finally another x16 slot, which also appears to be x4 electrically.
We're by no means opposed to having slots with more bandwidth, but the layout doesn't make a whole heap of sense and considering the PCIe 4.0 lanes are likely to be used for the M.2 slots, we're not entirely sure who these boards are designed for. At least one x8 slot would've been a lot more useful for older devices, such as 10 Gbps network cards or RAID cards, which can be picked up fairly cheaply second hand these days, but alas, none of those would be able to work at full speed with this board. Hopefully this is not what all the other Z690 motherboards will end up like.
As for the Prime Z690M-Plus D4, ASUS has managed to squeeze in no less than four M.2 slots, although one is for a Wi-Fi card, while the others are all 2280 slots. Overall this looks like a fairly unimpressive mATX board, which wasn't entirely unexpected, but disappointing nonetheless. It does at least have a USB-C type front connector, which also applies to the rest of the Prime Z690-P boards.
View at TechPowerUp Main Site
The four models on display are the Prime Z690-P WiFi D4, Prime Z690-P D4, Prime Z690-P and Prime Z690M-Plus D4. The last model doesn't strictly belong to the Prime Z690-P family, but it follows a pretty similar overall design. The Prime Z690-P is obviously the only DDR5 SKU among the four boards, although from what we can tell, there are no other differences between it and the equivalent DDR4 model.
As a matter of fact, ASUS hasn't really changed too much compared to its Prime Z590-P series boards when it comes to the overall board layout, although the heatsinks have been refreshed with different logos and slightly different cutouts in them. However, the big change is the slot layout, where ASUS has gone for no less than four physical x16 PCIe slots, which doesn't make a whole lot of sense, considering the slot placement. The location closest to the CPU is taken up by an M.2 22110 slot, so the regular PCIe slots start one position down, with what should be a PCIe 5.0 x16 slot.
Where it all goes a bit strange is the next slot, which is another x16 slot, although only x4 electrically and most likely PCIe 3.0. This slot would be mostly unusable if a two slot or wider graphics card is being used. Next we have another M.2 slot, but a 2280 slot, which is followed by another x16 slot, which again appears to be a x4 electrically, then a x1 slot, which is shared with another M.2 22110 slot and finally another x16 slot, which also appears to be x4 electrically.
We're by no means opposed to having slots with more bandwidth, but the layout doesn't make a whole heap of sense and considering the PCIe 4.0 lanes are likely to be used for the M.2 slots, we're not entirely sure who these boards are designed for. At least one x8 slot would've been a lot more useful for older devices, such as 10 Gbps network cards or RAID cards, which can be picked up fairly cheaply second hand these days, but alas, none of those would be able to work at full speed with this board. Hopefully this is not what all the other Z690 motherboards will end up like.
As for the Prime Z690M-Plus D4, ASUS has managed to squeeze in no less than four M.2 slots, although one is for a Wi-Fi card, while the others are all 2280 slots. Overall this looks like a fairly unimpressive mATX board, which wasn't entirely unexpected, but disappointing nonetheless. It does at least have a USB-C type front connector, which also applies to the rest of the Prime Z690-P boards.
View at TechPowerUp Main Site
