- Joined
- May 2, 2017
- Messages
- 7,762 (2.78/day)
- Location
- Back in Norway
System Name | Hotbox |
---|---|
Processor | AMD Ryzen 7 5800X, 110/95/110, PBO +150Mhz, CO -7,-7,-20(x6), |
Motherboard | ASRock Phantom Gaming B550 ITX/ax |
Cooling | LOBO + Laing DDC 1T Plus PWM + Corsair XR5 280mm + 2x Arctic P14 |
Memory | 32GB G.Skill FlareX 3200c14 @3800c15 |
Video Card(s) | PowerColor Radeon 6900XT Liquid Devil Ultimate, UC@2250MHz max @~200W |
Storage | 2TB Adata SX8200 Pro |
Display(s) | Dell U2711 main, AOC 24P2C secondary |
Case | SSUPD Meshlicious |
Audio Device(s) | Optoma Nuforce μDAC 3 |
Power Supply | Corsair SF750 Platinum |
Mouse | Logitech G603 |
Keyboard | Keychron K3/Cooler Master MasterKeys Pro M w/DSA profile caps |
Software | Windows 10 Pro |
You could get one of those Optane m.2 drives for that - and they also vastly outperform SLC NAND Flash at the same capacity, especially in random workloads and low queue depths. Much better suited to that task - but also, crucially, they have never sold in any significant quantity. The number of people willing to pay many times more for a small cache/scratch drive just isn't enough to sustain those kinds of products in the market.In all honesty I wouldn't mind seem more 2-bit MLC and even SLC more common and available in the consumer space again like when SSDs first came out.
It would be nice to have the option to get a 64GB (or larger) SLC drive for a scratch drive or something that's going to take a ton of abusive writes and still stand up.
What would be cool would be if drive vendors allowed for more flexibility in configuring their drives for the end user. For example, they could allow for alternative firmwares applied through their own drive management software that force the entire drive to run only in pseudo-SLC mode, at the cost of 2/3rds of its capacity - turning your 1000GB drive into a 333GB one, etc. This is likely a non-trivial undertaking though, given that the controller firmware would need significant changes and the increased performance would put more stress on the controller, increasing heat output under sustained loads. But it would be an option, much cheaper than bespoke products, and it would be pretty neat even if extremely few people would end up using it. (And of course there's increased risk involved as such a firmware change would require reformatting the drive, increasing the likelihood of PEBKAC errors.)