T0@st
News Editor
- Joined
- Mar 7, 2023
- Messages
- 2,077 (3.13/day)
- Location
- South East, UK
Sapphire's Radeon RX 7600 PULSE graphics card was leaked, albeit in fully boxed form, earlier this week. VideoCardz received a tip on Tuesday about a stack of products sitting in a retail store located somewhere in Asia - an insider source had taken photos of several boxes, weeks ahead of the rumored May 25 hardware launch. A brave seller on Singapore's Carousell online marketplace listed a number of Sapphire Radeon RX 7600 PULSE cards on the site, but these pages were swiftly taken down by admin. Specifications printed on outer packaging revealed that this GPU model packs 8 GB of VRAM and 32 RDNA3 CUs - indicating a full configuration of AMD's Navi 33 GPU die.
The embargo has been broken once again - earlier today VideoCardz published leaked images of the card itself (out of the box). The photos seem to be of official origin - perhaps destined for product pages on Sapphire's website(s) or online retail listings. A new PULSE custom cooling solution is on view - revealing a dual-fan and dual-slot design with a largely black cooler, accented with red markings plus a bit of white lettering. The shroud seems to lack any integrated RGB lighting zones or strips. An 8-pin power connector is present, possibly indicating that the custom card only requires 150 W (8-pin) + 75 W (PCIe) or more in operational power.
View at TechPowerUp Main Site | Source
The embargo has been broken once again - earlier today VideoCardz published leaked images of the card itself (out of the box). The photos seem to be of official origin - perhaps destined for product pages on Sapphire's website(s) or online retail listings. A new PULSE custom cooling solution is on view - revealing a dual-fan and dual-slot design with a largely black cooler, accented with red markings plus a bit of white lettering. The shroud seems to lack any integrated RGB lighting zones or strips. An 8-pin power connector is present, possibly indicating that the custom card only requires 150 W (8-pin) + 75 W (PCIe) or more in operational power.
View at TechPowerUp Main Site | Source