- Joined
- Aug 19, 2017
- Messages
- 2,651 (0.99/day)
A few days ago, we reported that NVIDIA and PCI-SIG have been doing some work around the existing controversial 12VHPWR power connector to make some improvements and prevent issues that happened along the way. Called 12V-2x6, the connector features minor revisions, and you can read more about it here. Today, we learn that NVIDIA has already been shipping implementations of the new 12V-2x6 connector in GeForce RTX 4070 graphics cards, confirmed by Igor's Lab. Majority of RTX 4070 cards from AIBs shipped with 8-pin PCI connector; however, it turns out that cards that didn't use the reference 12-pin connection carried a new 12V-2x6 revision.
Below, you can see the picture comparison with the connectors from the Founders Edition of GeForce RTX 4070 and RTX 4080. The new connector on the RTX 4070 has shorter sensing pins, which can detect whether the connector is fully plugged in. If not plugged all the way, the card will not draw the required maximum power load. This should, in theory, solve connector burning issues happening in the past; however, we are still left to see. In addition, we are not sure if this is the final implementation of the new connector, as the labeling refferest to it as "H+", whereas the new connector should carry the label "H++" on its module. Igor's Lab article notes, "Since the GeForce RTX 4070 FE, NVIDIA has already been using a modified 12VHPWR connector with significantly recessed pins! While the GeForce RTX 4080 Founders Edition still relies on the header from the CEM 5.0 with only 0.45 mm offset, the GeForce RTX 4070 Founders Edition has been using a modified variant with 1.7 mm inward offset since its launch, similar to the 12V-2x6 connector."
View at TechPowerUp Main Site | Source
Below, you can see the picture comparison with the connectors from the Founders Edition of GeForce RTX 4070 and RTX 4080. The new connector on the RTX 4070 has shorter sensing pins, which can detect whether the connector is fully plugged in. If not plugged all the way, the card will not draw the required maximum power load. This should, in theory, solve connector burning issues happening in the past; however, we are still left to see. In addition, we are not sure if this is the final implementation of the new connector, as the labeling refferest to it as "H+", whereas the new connector should carry the label "H++" on its module. Igor's Lab article notes, "Since the GeForce RTX 4070 FE, NVIDIA has already been using a modified 12VHPWR connector with significantly recessed pins! While the GeForce RTX 4080 Founders Edition still relies on the header from the CEM 5.0 with only 0.45 mm offset, the GeForce RTX 4070 Founders Edition has been using a modified variant with 1.7 mm inward offset since its launch, similar to the 12V-2x6 connector."
View at TechPowerUp Main Site | Source