Phanteks Unveils Enthoo Pro 2 Server Edition Full-tower Case

[btarunr]

Phanteks is excited to announce the launch of the Enthoo Pro 2 Server Edition, designed to deliver unparalleled performance and versatility. With innovative features like Phanteks "High-performance Fabric" and a spacious interior, the Enthoo Pro 2 Server Edition can accommodate any high-end configuration whether its SSI-EEB motherboards, extreme water cooling, or extensive storage requirements.

With support for both consumer and server grade hardware, the Enthoo Pro 2 Server Edition enables the seamless integration of diverse components, allowing users to build a cost-efficient server system that meets their specific requirements. The Pro 2 Server Edition expands support for more PCIe devices, accommodating server-grade hardware and providing exceptional cooling options for optimal performance. The additional left side fan bracket provides additional direct cooling for the most extreme server builds.



The Enthoo Pro 2 Server Edition offers extensive expansion capabilities with up to 11 PCI slots available allowing for the installation of multiple expansion cards, providing users with the freedom to customize their server setup to their liking. With its exceptional performance capabilities, unmatched compatibility, and extensive storage options, we believe the Enthoo Pro 2 Server Edition will empower professionals and enthusiasts alike to create powerful server systems without compromise.

Availability: July 2023

MSRP:

• Enthoo Pro 2 Server Edition Tempered Glass: €169.90 | $169.99 | £149.99
• Enthoo Pro 2 Server Edition Closed Panel: €159.90 | $159.99 | £139.99

View at TechPowerUp Main Site

 

[Super Firm Tofu]

I'll take one, and a pallet of T30's. To go. Pronto.

 

[SAINT ENZO]

WOw this is amazing, im preOrdering this one!!

 

[Skylinestar]

I think I have found my dream case.

 

[AsRock]

Looks nice but fan orientation \ airflow is questionable.

 

[Scrizz]

This is a full-size case.

 

[Tomgang]

I have a Phanteks enthoo 719 black case and can only say I am very happy with it. Expensive, but quality is good.

Based on my own experience. Phanteks cases is not a bad choice. All throw my specifically use and need for a dual system in 1 case also was a major factor for the choice of case, I am very happy with the choice.

 

[FiRe]

doesn't support a mini-itx second board? ffs

 

[Assimilator]

WTF is "high-performance fabric"?

Apart from that the price looks good for what you get, no kiddie RGB and the solid side panel is cheaper than the tempered glass rubbish. Would've been nice to get another USB-C port instead of two USB-A ones. The dimensions are going to be terrifying, I do hope that they offer a version in white.

Looks nice but fan orientation \ airflow is questionable.

How so?

 

[wolar]

Doesnt look bad but ill wait for some reviews before ordering one

 

[AsRock]

WTF is "high-performance fabric"?

Apart from that the price looks good for what you get, no kiddie RGB and the solid side panel is cheaper than the tempered glass rubbish. Would've been nice to get another USB-C port instead of two USB-A ones. The dimensions are going to be terrifying, I do hope that they offer a version in white.


How so?

Mainly due to the side fans, the typical designed video cooler breaths from were the 3 fans will be pushing air against. You have the fans of your GPU blowing air or trying to blow air at your card and you have these 3 fans blowing at the output of the card.

Brute force cooling wont the fans have to be higher too do that ?.

No dust filters at all ?.

And the 3 fans at the front were you can have them set back in tot he case that would require the front to be sealed so all the air comes from the front.

Are they 90mm fans at the top ?, how ever looks like larger ones could be fitted .

PSU's in a crappy place.

Everyone's needs are different in the end i know what i would need to keep my system cool when it's 87f+ in this room.

 

[Assimilator]

Mainly due to the side fans, the typical designed video cooler breaths from were the 3 fans will be pushing air against. You have the fans of your GPU blowing air or trying to blow air at your card and you have these 3 fans blowing at the output of the card.

Sure, but they're completely optional.

No dust filters at all ?.

I think it's a mesh front, which doubles as a dust filter nowadays.

PSU's in a crappy place.

Same place as 99% of cases nowadays.

 

[AsRock]

Sure, but they're completely optional.

I think it's a mesh front, which doubles as a dust filter nowadays.

Same place as 99% of cases nowadays.

Actually looking at it again the front does have a filter how ever like i said it's going to pull air though were the less resistance is. From what i can see the front seems to be seal to some point at least.

Problem with having a PSU at the bottom less direct air can get to the video card and your just depending on the front fans.

Because the PSU is on the bottom of most cases don't mean it's good. I find it very hard to believe that having the PSU else were and having 2-3 bottom fans would not make it perform better.

 

[Bavor]

It needs to have a dual PSU option unless I'm missing the mounting spot for the 2nd PSU.

 

[SAINT ENZO]

Someone post a link when they figure out where we can pre'Order or purchase it Please.

 

[maxfly]

Looks solid and the price is nice as well. Phanteks makes quality cases so you don't have to worry about things not fitting correctly.

The fabric mesh is the filter system they use. Very durable.

 

[Audioave10]

I have the original Enthoo Pro case (mid size) and its been very good and I even got a drive bay so I can stick a movie in there
if I feel like it.

 

[bonehead123]

lookalikea meh megaboxen...
soundalikea meh megaboxen...
smellalikea me megaboxen...

guess what.......

it IS a meh megaboxen

y/A/w/n....

 

[JosefHrib]

I couldn’t resist and I created preorder PH-ES620PTG_BK02 on Caseking (plus 9x Phanteks T30 which upgrade my current 9x Noctua NH-A12x25) and I will upgrade from Fractal Design Define 7 XL with custom made Vented Front Panel for Define 7 XL from Coldzero

 

[JosefHrib]

Someone post a link when they figure out where we can pre'Order or purchase it Please.

On caseking de you can create preorder both variant (Tempered Glass or Closed Panel). For example I preordered yesterday variant with TG.

 

[ypsylon]

I was so Hyped for this case, but manual quickly cured me. If you order it with TG version (not for bling, but its easier to see faulty drives LEDs on HBA or error codes through the glass than steel ), then screwing the fan bracket in place will block all the HDD/SSD cages on the side panel.

The left-side fan bracket can be installed in a secondary position to pull air from the front of the
chassis. Secure the fan bracket with 5x screws as shown.
*This position will block the right side fan and HDD positions.

Like WTH? What genius thought of this? Couldn't they make a case which is 2 cm longer so you can put a bracket and populate all HDD/SSD mounting locations. It doesn't make any sense. Also forget about optional 2x5.25" bracket for say ICYDOCK dock 16 SATA/NVMe/SAS drives.

If you want all HDD/SSD/5.25" mounting locations you must order steel door with left panel vents.

 

[claes]

I tried to find the quote you shared but couldn’t find it?

Also, why bother? You can have front intakes and the right side intakes with all HDD caddies occupied and just keep the left side fan bracket in it’s weird GPU/chipset cooling position.

 

[SAINT ENZO]

For anyone wanting to buy this case in the U.S. its up for sale @ phanteks store website
https://www.phanteks.store/products...-side-panel-black?_pos=1&_sid=d6ed3bf68&_ss=r

 

[Assimilator]

Product page is up now: https://phanteks.com/Enthoo-Pro2-Server.html cc @btarunr

At 240 mm x 580 mm x 560 mm (W x H x D) it's not actually that big! But sadly, seems like no white version.