- Joined
- Oct 9, 2007
- Messages
- 47,129 (7.58/day)
- Location
- Hyderabad, India
System Name | RBMK-1000 |
---|---|
Processor | AMD Ryzen 7 5700G |
Motherboard | ASUS ROG Strix B450-E Gaming |
Cooling | DeepCool Gammax L240 V2 |
Memory | 2x 8GB G.Skill Sniper X |
Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
Storage | Western Digital Black NVMe 512GB |
Display(s) | BenQ 1440p 60 Hz 27-inch |
Case | Corsair Carbide 100R |
Audio Device(s) | ASUS SupremeFX S1220A |
Power Supply | Cooler Master MWE Gold 650W |
Mouse | ASUS ROG Strix Impact |
Keyboard | Gamdias Hermes E2 |
Software | Windows 11 Pro |
EK, the premium liquid cooling solutions manufacturer, is launching a wide range of EK-Loop OmniLink cables to support its fans, pumps, D-RGB, and 12 V and 5 V power distribution connections. EK's OmniLink solutions allow daisy chaining of multiple fans, reducing cable clutter and greatly easing cable management. These cables perfectly complement EK-Loop FPT and EK-Quantum Impulse fans and all products with standard D-RGB and 4-pin fan connectors. This product series contains splitters, extenders, and cables with specific requirements that act as replacements for PSU cables.
EK-Loop OmniLink 6-Pin Power (Dual PWM) cable is the starting point of the OmniLink cable harness with the necessary 6-Pin power, D-RGB, and dual 4-Pin PWM connectors. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
EK-Loop OmniLink 6-Pin Power Cable
EK-Loop OmniLink 6-Pin Power cable is the starting point of the OmniLink cable harness with the necessary 6-Pin power, D-RGB, and 4-Pin fan connectors. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable will not draw any power from your motherboard/controller headers since +5V and +12V are connected directly to the PSU. Thus raising the maximum current available to 8.5 A for D-RGB and 8.5 A for fans/pumps.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
EK-Loop OmniLink Molex Power Cable
EK-Loop OmniLink Molex Power cable is the starting point of the OmniLink cable harness with the necessary Molex power, D-RGB, and 4-Pin fan connectors. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable can be installed without any modifications/re-pinning with any PSU while still providing the maximum 8.5 A available on 5 V and 12 V by utilizing the Molex connector.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
EK-Loop OmniLink SATA Power cable is the starting point of the OmniLink cable harness with the necessary SATA power, D-RGB, and 4-Pin fan connectors. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable can be installed without any modifications/re-pinning with any PSU while still providing the 4.5 A available on 5 V and 12 V by utilizing the SATA connector, which has a lower power output than the Molex.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
EK-Loop OmniLink MF Extension - 100 mm Cable
This EK-Loop OmniLink MF Extension cable allows the user to extend the reach of the OmniLink cable harness by 100 mm. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. Allows full 8.5 A of power through the extension.
EK-Loop OmniLink MF Extension - 500 mm Cable
This EK-Loop OmniLink MF Extension cable allows the user to extend the reach of the OmniLink cable harness by 500 mm. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. Allows full 8.5 A of power through the extension.
EK-Loop OmniLink 2-Way Splitter - 100 mm Cable
The EK-Loop OmniLink 2-Way Splitter cable allows the user to connect up to two OmniLink products or to connect two separate OmniLink cable harnesses. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable will not double the current capacity, as it will remain 8.5 A in total. The power load may be unequal due to the split.
OMNILINK OUTPUT ADAPTERS:
EK-Loop OmniLink Fan PWM D-RGB Signal Splitter Cable
EK-Loop OmniLink Fan PWM D-RGB Signal Splitter cable allows users to connect D-RGB LED devices and 4-Pin PWM fans to the OmniLink cable harness using the standard connectors. It is primarily used for connecting legacy fans into the omnilink system. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management.
Molex Micro-Fit 3.0 8-Pin Male Connector to:
The EK-Loop OmniLink D-RGB 3-Way Signal Splitter cable allows the user to connect and power up to three D-RGB LED devices and continue the OmniLink cable harness. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. Suitable for adding EK D-RGB water blocks, reservoirs, distribution plates, and other D-RGB LED products to an OmniLink cable harness.
Molex Micro-Fit 3.0 8-Pin Male Connector to:
EK-Loop OmniLink Pump SATA PWM D-RGB Signal Splitter cable allows users to connect D-RGB LED devices, SATA-powered pumps, and 4-Pin PWM fans to the OmniLink cable harness using the standard connectors. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management.
Molex Micro-Fit 3.0 8-Pin Male Connector to:
Availability and Pricing
All EK-OmniLink solutions are available for purchase through the EK Webshop and Partner Reseller Network. In the table below, you can find the manufacturer-suggested retail price (MSRP), VAT included.
View at TechPowerUp Main Site
EK-Loop OmniLink 6-Pin Power (Dual PWM) cable is the starting point of the OmniLink cable harness with the necessary 6-Pin power, D-RGB, and dual 4-Pin PWM connectors. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
- 1x 6-Pin Power Connector (Pinout PSU Dependent)
- 1x 4-Pin PWM 1 Source Fan Female Connector (TACHO, PWM)
- 1x 4-Pin PWM 2 Source Fan Female Connector (PWM Signal Only)
- 1x 3-Pin D-RGB LED Source Female Source Connector (Data Line Only)
EK-Loop OmniLink 6-Pin Power Cable
EK-Loop OmniLink 6-Pin Power cable is the starting point of the OmniLink cable harness with the necessary 6-Pin power, D-RGB, and 4-Pin fan connectors. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable will not draw any power from your motherboard/controller headers since +5V and +12V are connected directly to the PSU. Thus raising the maximum current available to 8.5 A for D-RGB and 8.5 A for fans/pumps.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
- 1x 6-Pin Power Connector (Pinout PSU Dependent)
- 1x 4-Pin PWM 1 Source Female Fan Connector (Blank, Blank, TACHO, PWM)
- 1x 3-Pin D-RGB LED Source Female Connector (5 V, Data, Blocked, Ground)
EK-Loop OmniLink Molex Power Cable
EK-Loop OmniLink Molex Power cable is the starting point of the OmniLink cable harness with the necessary Molex power, D-RGB, and 4-Pin fan connectors. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable can be installed without any modifications/re-pinning with any PSU while still providing the maximum 8.5 A available on 5 V and 12 V by utilizing the Molex connector.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
- 1x Molex Connector 4pin (Power)
- 1x 4-Pin PWM 1 Source Female Fan Connector (TACHO, PWM)
- 1x 3-Pin D-RGB LED Source Female Connector (5 V, Data, Blocked, Ground)
EK-Loop OmniLink SATA Power cable is the starting point of the OmniLink cable harness with the necessary SATA power, D-RGB, and 4-Pin fan connectors. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable can be installed without any modifications/re-pinning with any PSU while still providing the 4.5 A available on 5 V and 12 V by utilizing the SATA connector, which has a lower power output than the Molex.
Molex Micro-Fit 3.0 8-Pin Female Connector to:
- 1x SATA Power Male Connector
- 1x 4-Pin PWM 1 Source Female Fan Connector (TACHO, PWM)
- 1x 3-Pin D-RGB LED Source Female Connector (5 V, Data, Blocked, Ground)
EK-Loop OmniLink MF Extension - 100 mm Cable
This EK-Loop OmniLink MF Extension cable allows the user to extend the reach of the OmniLink cable harness by 100 mm. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. Allows full 8.5 A of power through the extension.
EK-Loop OmniLink MF Extension - 500 mm Cable
This EK-Loop OmniLink MF Extension cable allows the user to extend the reach of the OmniLink cable harness by 500 mm. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. Allows full 8.5 A of power through the extension.
EK-Loop OmniLink 2-Way Splitter - 100 mm Cable
The EK-Loop OmniLink 2-Way Splitter cable allows the user to connect up to two OmniLink products or to connect two separate OmniLink cable harnesses. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. This cable will not double the current capacity, as it will remain 8.5 A in total. The power load may be unequal due to the split.
OMNILINK OUTPUT ADAPTERS:
EK-Loop OmniLink Fan PWM D-RGB Signal Splitter Cable
EK-Loop OmniLink Fan PWM D-RGB Signal Splitter cable allows users to connect D-RGB LED devices and 4-Pin PWM fans to the OmniLink cable harness using the standard connectors. It is primarily used for connecting legacy fans into the omnilink system. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management.
Molex Micro-Fit 3.0 8-Pin Male Connector to:
- 1x Molex Micro-Fit 3.0 8-Pin Female Connector
- 1x 4-Pin PWM 1 Fan Male Connector (Ground, +12V, TACHO, PWM)
- 1x 3-Pin D-RGB LED Female Connector (+5V, Data, Blocked, Ground)
The EK-Loop OmniLink D-RGB 3-Way Signal Splitter cable allows the user to connect and power up to three D-RGB LED devices and continue the OmniLink cable harness. The OmniLink cable allows for easy transmission and distribution of 12 V and 5 V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management. Suitable for adding EK D-RGB water blocks, reservoirs, distribution plates, and other D-RGB LED products to an OmniLink cable harness.
Molex Micro-Fit 3.0 8-Pin Male Connector to:
- 1x Molex Micro-Fit 3.0 8-Pin Female Connector
- 3x 3-Pin D-RGB LED Female Connector (+5V, Data, Blocked, Ground)
EK-Loop OmniLink Pump SATA PWM D-RGB Signal Splitter cable allows users to connect D-RGB LED devices, SATA-powered pumps, and 4-Pin PWM fans to the OmniLink cable harness using the standard connectors. The OmniLink cable allows for easy transmission and distribution of +12V and +5V Power, PWM, TACHO, and D-RGB signals. The cable features a black ribbon style for easy build integration and cable management.
Molex Micro-Fit 3.0 8-Pin Male Connector to:
- 1x Molex Micro-Fit 3.0 8-Pin Female Connector
- 1x SATA Power Female Connector (Ground, +12V)
- 1x 4-Pin PWM 2 Fan Male Connector (Ground, +12V, TACHO, PWM)
- 1x 3-Pin D-RGB LED Female Connector (+5V, Data, Blocked, Ground)
Availability and Pricing
All EK-OmniLink solutions are available for purchase through the EK Webshop and Partner Reseller Network. In the table below, you can find the manufacturer-suggested retail price (MSRP), VAT included.
View at TechPowerUp Main Site