Bytor
New Member
- Joined
- Jun 27, 2007
- Messages
- 1,051 (0.17/day)
| System Name | "The Dark Spider" |
|---|---|
| Processor | AMD Phenom 9850 @ 3.0 |
| Motherboard | Asus M3A79-T |
| Cooling | Water: CPU and GPU's, 2 pumps, 2 BIX Rads, D-Tek Fuzion v1, 2 Swiftech MCW60 |
| Memory | 4 gigs Crucial Balistix Tracers (1066 @ 1256) |
| Video Card(s) | Sapphire 4870x2 |
| Storage | WD SATA 640 Gig HDD |
| Display(s) | Acer 24" beast... |
| Case | Modded Rocketfish |
| Audio Device(s) | Onboard (only use head phones) |
| Power Supply | 700 watt |
| Software | a bunch |
| Benchmark Scores | 3D Mark 06: 9859 on 2-X1950 pro's Xfire 3D Mark 06: 12794 on 1-3870 3D Mark 06: 16484 Xfire |
To view this case mod, go here.
Specs:
The Rig: AMD 6000+, M3A32-MVP MB, 2 Gigs Crucial Balistix Tracers (1066 mhz) memory, 2 WD SATA Raptors raided, 2 Visiontek HD3870's in Crossfire, 750 watt PSU. Water Cooled: 2 Swiftech MCP350 Pumps w/Oclabs Tops, D-Tek Fuzion CPU Block, 2 MCW60 GPU blocks, Black Ice Extreme 360 & 240 Rads, 5 141 CFM Delta fans, Swiftech Micro Res.
Mods:
Modded the 2 windows a few years back, but recently add water. Drilled 4 1" holes in the back to pass the 7/16"x5/8" hoses through. Decided to mount both radiators on the back of the case at a 45 degree angle w/ 4 home made brackets. Mounted both water pumps outside the case at the bottom. A swiftech Micro-res is mounted above the pumps and feeds the 1st pump.
My loop is as follows: Res., 1st pump, BIX 360 Radiator, CPU Block, 2nd pump, BIX 240 radiator, Top Video card GPU block, bottom GPU block, Res.
Since the last post of the other women I have replaced the Sapphire X1950 pro's with Visiontek HD3870's and a D-Tec CPU water block. And as you may notice the fluid is green and not pink...
Specs:
The Rig: AMD 6000+, M3A32-MVP MB, 2 Gigs Crucial Balistix Tracers (1066 mhz) memory, 2 WD SATA Raptors raided, 2 Visiontek HD3870's in Crossfire, 750 watt PSU. Water Cooled: 2 Swiftech MCP350 Pumps w/Oclabs Tops, D-Tek Fuzion CPU Block, 2 MCW60 GPU blocks, Black Ice Extreme 360 & 240 Rads, 5 141 CFM Delta fans, Swiftech Micro Res.
Mods:
Modded the 2 windows a few years back, but recently add water. Drilled 4 1" holes in the back to pass the 7/16"x5/8" hoses through. Decided to mount both radiators on the back of the case at a 45 degree angle w/ 4 home made brackets. Mounted both water pumps outside the case at the bottom. A swiftech Micro-res is mounted above the pumps and feeds the 1st pump.
My loop is as follows: Res., 1st pump, BIX 360 Radiator, CPU Block, 2nd pump, BIX 240 radiator, Top Video card GPU block, bottom GPU block, Res.
Since the last post of the other women I have replaced the Sapphire X1950 pro's with Visiontek HD3870's and a D-Tec CPU water block. And as you may notice the fluid is green and not pink...
Last edited by a moderator:
