malware
New Member
- Joined
- Nov 7, 2004
- Messages
- 5,422 (0.73/day)
- Location
- Bulgaria
Processor | Intel Core 2 Quad Q6600 G0 VID: 1.2125 |
---|---|
Motherboard | GIGABYTE GA-P35-DS3P rev.2.0 |
Cooling | Thermalright Ultra-120 eXtreme + Noctua NF-S12 Fan |
Memory | 4x1 GB PQI DDR2 PC2-6400 |
Video Card(s) | Colorful iGame Radeon HD 4890 1 GB GDDR5 |
Storage | 2x 500 GB Seagate Barracuda 7200.11 32 MB RAID0 |
Display(s) | BenQ G2400W 24-inch WideScreen LCD |
Case | Cooler Master COSMOS RC-1000 (sold), Cooler Master HAF-932 (delivered) |
Audio Device(s) | Creative X-Fi XtremeMusic + Logitech Z-5500 Digital THX |
Power Supply | Chieftec CFT-1000G-DF 1kW |
Software | Laptop: Lenovo 3000 N200 C2DT2310/3GB/120GB/GF7300/15.4"/Razer |
If you own one of the latest ATI Radeon HD 4850 cards and you're not satisfied with the reference single slot cooling and more specially with the temps you're getting in both idle and load, here's a quick workaround which might help you until better solution is available. A Guru3D forum member has found that if you make a profile in catalyst after turning on Overdrive, you can then edit it and manually change the fan speed. All steps to make it work are written here. Here's also a direct link to the full Guru3D thread. I'm not exactly sure, but this workaround should also work with ATI Radeon HD 4870 cards.
View at TechPowerUp Main Site
View at TechPowerUp Main Site