ataraxia
New Member
- Joined
- Apr 23, 2006
- Messages
- 75 (0.01/day)
- Location
- indiana
Processor | AMD FX55/AMD64 3200/AMD OPTY170 |
---|---|
Motherboard | DFI SLI-DR/ABIT KV8MAX3/EPOX 9PNASLI |
Cooling | XP120/TT VENUS/STOCK |
Memory | OCZ EL GOLD 2X512MB IN ALL MACHINES |
Video Card(s) | 7800 GTX/6800NU/SLI 7600 GT's |
Storage | 80 WD RAPTOR/MAXTOR 80/HITCH 80 SII |
To view this case mod, go here.
Specs:
DFI SLi-DR
AMD Fx-55 w/xp120 & TT120mm
OCZ EL gold 2x512
7800 GTX W/80MM
Vantec Stealth 520w
80gig Raptor
NEC 3250A
TT TENOR
Mods:
AMD logo cut out on top of the case. Windows on each side of the case. Removed shroud and fan from 7800gtx and mounted a 80mm fan (dropped atleast 7-10 degrees on idle and load). Removed the hard drive/brace. Used the floppy brace to hold the raptor and cut the brace to mount a 80mm to blow on the raptor
This case was one hard case to mod...no, i am serious i mean real hard. TT i swear makes cases out of tank armor. my poor dremel went through atleast 30-40 cutting wheels. not to mention on the sides i had to use a 4inch grinder.took alot of time and i spent around 30 bux for the plexiglass/dremel cutting wheels/nutts and bolts.
Specs:
DFI SLi-DR
AMD Fx-55 w/xp120 & TT120mm
OCZ EL gold 2x512
7800 GTX W/80MM
Vantec Stealth 520w
80gig Raptor
NEC 3250A
TT TENOR
Mods:
AMD logo cut out on top of the case. Windows on each side of the case. Removed shroud and fan from 7800gtx and mounted a 80mm fan (dropped atleast 7-10 degrees on idle and load). Removed the hard drive/brace. Used the floppy brace to hold the raptor and cut the brace to mount a 80mm to blow on the raptor
This case was one hard case to mod...no, i am serious i mean real hard. TT i swear makes cases out of tank armor. my poor dremel went through atleast 30-40 cutting wheels. not to mention on the sides i had to use a 4inch grinder.took alot of time and i spent around 30 bux for the plexiglass/dremel cutting wheels/nutts and bolts.
Last edited by a moderator: