Sharkoon Intros Vaya ATX Mid-Tower Value Case

[btarunr]

Sharkoon rolled out Vaya, a value ATX mid-tower case priced at just around $35. Made entirely of SECC steel and ABS plastic, Vaya provides all the essentials to house today's hardware, including tool-free drive-bays and expansion slot covers, a motherboard tray with holes at the right places to help cable-management, a hole behind the CPU socket area to help handling coolers with backplates, and a pair of holes for water-cooling tubes.

Measuring 465 x 185 x 440 mm (L x W x H), the Sharkoon Vaya provides room for up to four 5.25" drives or utility panels, one exposed 3.5" bay, and four internal 3.5" bays. The front panel provides basic USB 2.0 and audio ports. The lone fan bundled is a front red-illuminated 120 mm spinner, there's room for one 120 mm fan on the rear panel, and two on the side panel.



View at TechPowerUp Main Site

 

[Frick]

It looks pregnant. With a baby from HELL.

(ok this needs to be cleared up: my main argument against it/the hell reference is the red colour. I hate shiny colours in cases.)

 

[brandonwh64]

Ugly

 

[arterius2]

It looks pregnant. With a baby from HELL.

+1, I'm a designer myself -obviously for more complicated things.
Of course, this is not the worst case I've seen, but I sometimes wonder how hard is it for a company to actually hire someone who can design worth a damn, it it simply amazing that such products can make it past quality control, I always have difficulty wrapping my head around this. It is really not that difficult to design a something as simple as a computer case. too often I come across god awfully ugly products that would take someone like me about 15 minutes to overturn it come up with an elegant design that would be suitable for majority of the market.

 

[micropage7]

bad front bezel, the top is good but the bottom is ugly
how come they design it like that

 

[a_ump]

Eh, personally i think you all are asking much for a $35 case. this is one of then nicer ones i've seen for that price range, i'd buy it. Course i haven't looked at cases in about a year so maybe the market is different now.

 

[arterius2]

Eh, personally i think you all are asking much for a $35 case. this is one of then nicer ones i've seen for that price range, i'd buy it. Course i haven't looked at cases in about a year so maybe the market is different now.

true, tho from a design point of view, cheaper products shouldn't necessarily be more ugly than the expensive ones(you try to make the best looking products within the budget). however, my comment wasn't directed at this case alone, I was talking about poor designed products in general, but you are absolutely right, for $35 this isn't bad.

 

[brandonwh64]

If the front was not so ugly then yes, it is a nice 35$ case but that front is stupid

 

[Casecutter]

It reminds me of Darth Vader... and yes right away I found it unattractive.
Distinctive while not overwrought is the desirable image you want such mainstream /budget cases to exemplify.

How hard is that... obviously?

 

[micropage7]

If the front was not so ugly then yes, it is a nice 35$ case but that front is stupid

yeah if i buy it, the first thing i do is remove the front bezel

 

[Regenweald]

A buddy of mine wants me to build him a cheap workstation pretty soon. Front blowing fan, tool-less installation, looks decent enough. 35$ ? Sold. I can spend more on stuff that matters now. This really just made it to the top of my case list for him.

 

[arterius2]

A buddy of mine wants me to build him a cheap workstation pretty soon. Front blowing fan, tool-less installation, looks decent enough. 35$ ? Sold. I can spend more on stuff that matters now. This really just made it to the top of my case list for him.

try Silverstone PS05, removable dust filters included on all intake ports.

 

[Regenweald]

try Silverstone PS05, removable dust filters included on all intake ports.

lol, exactly the case I was looking at for myself! great value at such a low price point, I was thinking of doing an experimental Llano system in it, A8 + 6670 and see how far I could overclock them stably...I'll see how funds go. Great suggestion though, really like that case.

 

[[H]@RD5TUFF]

I gotta say I like it, but any idea on pricing ?

 

[Regenweald]

Yeah, hopefully it will be available soon and between 35$ and 45$.

 

[Frick]

I gotta say I like it, but any idea on pricing ?

Sharkoon rolled out Vaya, a value ATX mid-tower case priced at just around $35.

From the OP.

Could be worht it actually despite the looks. And it would look better if you replace the fan/disable the light.

 

[Jonap_1st]

its even more uglier to see some people still complaining for $35 case..

- made entirely of SECC steel and ABS plastic,
- tool-free drive-bays and expansion slot covers,
- motherboard tray with holes at the right places to help cable-management,
- a hole behind the CPU socket area to help handling coolers with backplates,
- a pair of holes for water-cooling tubes.

so far i havent see some major manufactures did this and priced it below $40

 

[arterius2]

its even more uglier to see some people still complaining for $35 case..

- made entirely of SECC steel and ABS plastic,
- tool-free drive-bays and expansion slot covers,
- motherboard tray with holes at the right places to help cable-management,
- a hole behind the CPU socket area to help handling coolers with backplates,
- a pair of holes for water-cooling tubes.

so far i havent see some major manufactures did this and priced it below $40

Silverstone PS05

 

[Peter1986C]

This can be found for about the same price: http://xigmatek.com/product.php?productid=27&type=photo looks better, doesn't it? And indeed it has got some CM holes.

 

[Jonap_1st]

Silverstone PS05

for $49

This can be found for about the same price: http://xigmatek.com/product.php?productid=27&type=photo looks better, doesn't it? And indeed it has got some CM holes.

looks better but yet it got thinner because asgard use SGCC alumunium, while vaya use SECC steel.

beside asgard still selled around $45-50..

 

[micropage7]

value case is for anyone who need basic things, if we take alook at the title it means for anyone who buy it please dont complain about what it looks coz you just pay 35$, if you want a better one you may pay more than that

 

[Jonap_1st]

value case is for anyone who need basic things, if we take alook at the title it means for anyone who buy it please dont complain about what it looks coz you just pay 35$, if you want a better one you may pay more than that

its good if you were not complained about how it looks on fifth post..

 

[Widjaja]

Someone will buy it or it will be in some custom gaming package deal so the consumer has no choice.

Some people like some really ugly things.

I was wanting to get a Sharkoon Bandit but no one sells them here.
My old Lian Li is good enough for now.

 

[Peter1986C]

beside asgard still selled around $45-50..

Sorry man, I had the price point of ~35 euro in my mind and unconsciously had the Euro = US Dollar fallacy.

 

[micropage7]

its good if you were not complained about how it looks on fifth post..

he he he.. i drunk at that time