thanks cadaveca for the review.
what LLC-level are you using during oc?
AS I mentioned in the review, I do not feel such adjustments should be nessecary for end users. Each board product has a slightly differnt way of deal with this when left on "AUTO", and I think highlighting that difference will prove useful.
So, as I said in the review, I set 1.225 V in BIOS, and actual voltage under load, measured by multimeter, was 1.187 V. This tells me that no loadline caliration is used as stock by the board, and changing other CPU settings does not automatically adjust loadline settings.
As I go through the boards, you'll see there are slight differences in how that all works. All I adjusted was CPU voltage, to 1.225v, as well as manually setting vDIMM and VCCSA. VDIMM ran 1.7 V default, so I lowered it, and VCCSA ran 1.069, so I lowered that to 1.05 V.
My approach to this should help show how some boards make things easier than others, and sometimes, some over-compensate.