- Joined
- Oct 9, 2007
- Messages
- 46,951 (7.61/day)
- Location
- Hyderabad, India
System Name | RBMK-1000 |
---|---|
Processor | AMD Ryzen 7 5700G |
Motherboard | ASUS ROG Strix B450-E Gaming |
Cooling | DeepCool Gammax L240 V2 |
Memory | 2x 8GB G.Skill Sniper X |
Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
Storage | Western Digital Black NVMe 512GB |
Display(s) | BenQ 1440p 60 Hz 27-inch |
Case | Corsair Carbide 100R |
Audio Device(s) | ASUS SupremeFX S1220A |
Power Supply | Cooler Master MWE Gold 650W |
Mouse | ASUS ROG Strix Impact |
Keyboard | Gamdias Hermes E2 |
Software | Windows 11 Pro |
EK Water Blocks, Ljubljana based premium computer liquid cooling gear manufacturer, is excited to launch the true single-slot liquid cooling solution for AMD Radeon reference design R9 Nano graphics card. EK-FC R9 Nano directly cools the GPU, HBM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks.
EK-FC R9 Nano water block features EK unique central inlet split-flow cooling engine design for best possible cooling performance. Such system also works flawlessly with the reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance, allowing this product to be used in liquid cooling systems using weaker water pumps. Unlike the original cooling solution with a single 90mm fan that comes with AMD Radeon R9 Nano and takes up two slots, EK-FC R9 Nano water block will transform the R9 Nano into a stunningly beautiful single-slot graphics card! EK encloses a single-slot I/O bracket which replaces the original two-slot in order to make installation of mutliple graphics cards easier.
The base is made of electrolytic nickel-plated copper, while the top is made of either acrylic- or POM Acetal material, depending on the variant. Plexi variants also feature two pre-drilled slots for 3mm LED diodes. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.
Additionally the EK-FC R9 Nano has been engineered with FC Terminal connection ports for up to four R9 Nano's on a single ATX form factor motherboard, thus allowing for trouble-free swap out and upgrade without any additional changes to the cooling loop.
View at TechPowerUp Main Site
EK-FC R9 Nano water block features EK unique central inlet split-flow cooling engine design for best possible cooling performance. Such system also works flawlessly with the reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance, allowing this product to be used in liquid cooling systems using weaker water pumps. Unlike the original cooling solution with a single 90mm fan that comes with AMD Radeon R9 Nano and takes up two slots, EK-FC R9 Nano water block will transform the R9 Nano into a stunningly beautiful single-slot graphics card! EK encloses a single-slot I/O bracket which replaces the original two-slot in order to make installation of mutliple graphics cards easier.
![](https://www.techpowerup.com/img/15-09-22/90b_thm.jpg)
![](https://www.techpowerup.com/img/15-09-22/90c_thm.jpg)
![](https://www.techpowerup.com/img/15-09-22/90d_thm.jpg)
![](https://www.techpowerup.com/img/15-09-22/90a_thm.jpg)
The base is made of electrolytic nickel-plated copper, while the top is made of either acrylic- or POM Acetal material, depending on the variant. Plexi variants also feature two pre-drilled slots for 3mm LED diodes. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.
Additionally the EK-FC R9 Nano has been engineered with FC Terminal connection ports for up to four R9 Nano's on a single ATX form factor motherboard, thus allowing for trouble-free swap out and upgrade without any additional changes to the cooling loop.
View at TechPowerUp Main Site