Phanteks Launches Glacier G2080Ti, G2080 Water-blocks for NVIDIA RTX

[Raevenlord]

Phanteks are proud to announce the launch of their new Glacier G2080Ti and G2080 water-blocks. Designed with the enthusiast in mind, they're perfect for gamers looking to push their new NVIDIA RTX cards to the max! The G2080Ti are full-cover water-blocks with an optimized central channel structure, complete with 6mm thick nickel plated copper base for efficient heat exchange. The blocks are sealed with industry leading VITON O-RINGS, meaning a quality seal with resistance to even the most extreme temperatures.

As well as quality cooling performance, the Glacier range also offers digital addressable RGB lighting, compatible with ASUS Aura SYNC and the Phanteks Digital RGB Controller (available separately).





Phanteks Glacier G2080/G2080Ti at a glance:

• Anodized chrome plated aluminum covers
• Thick copper base for optimum heat transfer
• Central-flow connection with high-flow engineering
• VITON rubber sealing for high durability and resistance to over tightening
• Integrated digital addressable RGB lighting with ASUS Aura Sync and compatible with the Phanteks Digital RGB Controller
• Available in satin black and mirror chrome
• Phanteks PH-NEC thermal compound with diamond-like particles included

Designed For Performance

• Full cover waterblock design for graphics card PCB
• 6mm thick copper base brings a higher level of heat transfer and capacity
• Extreme cooling performance and optimal heat dissipation
• High flow engineering reduces flow resistance for outstanding cooling performance
• Central flow connection terminal
• Phanteks PH-NDC thermal compound with nano diamond like particles included

DuPont Viton Rubber Washer
DuPont Viton rubber washers provide the ultimate seal for your Glacier G2080 water-block, the military-grade hardware can stand up to even the most extreme temperatures. The Viton rubber washers offers a rugged seal which resists damage during installation as well as retaining its seal even after compression for long periods.

Phanteks Glacier Valve Fittings
Building and maintaining your water-cooling loop is made much easier with the right fittings. The new glacier valve fittings allow you to close off your water-loop to perform maintenance without having to drain the entire system.

The Glacier pass-through fitting allows for easier interconnection between different chassis compartment with female G1/4 threads on both sides.



GLACIER G2080Ti Founders Edition Specifications

• Product Type: GPU Waterblock
• Materials: Copper Base, Nickel plated Acrylic Cover Aluminum Covers (Anodized / Chrome plated) Brass plug (Anodized / Nickel plated)
• Compatibility: RTX 2080 Ti Founders Edition / RTX 2080 Founders Edition
• Waterblock Dimension: 124 mm x 260 mm x 16.5 mm (W x H x D) 4.9 x 10.2 x 0.6 inch
• Net Weight: 0.8 kg (1.76lbs)
• Gross Weight: 1.5 kg (3.35lbs)
• Package Dimension: 160 mm x 300 mm x 50 mm (W x H x D) 6.3 in x 11.8 in x 2 in
• Colors: Satin Black or Mirror Chrome
• Warranty: 2 Years

GLACIER G2080 Founders Edition Specifications

• Product Type: GPU Waterblock
• Materials: Copper Base, Nickel plated Acrylic Cover Aluminum Covers (Anodized / Chrome plated) Brass plug (Anodized / Nickel plated)
• Compatibility: RTX 2080 Founders Edition
• Waterblock Dimension: 124 mm x 252 mm x 16.5 mm (W x H x D) 4.9 x 9.9 x 0.6 inch
• Net Weight: 0.7 kg (1.54lbs)
• Gross Weight: 1.5 kg (3.35lbs)
• Package Dimension: 160 mm x 300 mm x 50 mm (W x H x D) 6.3 in x 11.8 in x 2 in
• Colors: Satin Black or Mirror Chrome
• Warranty: 2 Years

Finished in Satin Black or Mirror Chrome with D-RGB lighting. which are now avaliable for pre-order at Overclockers UK from £139.99.

View at TechPowerUp Main Site

 

[John Naylor]

I'm looking at the pic wondering why there are 2 stacked valves ... was 4-5 seconds before realized I was looking at valve on reflective surface.... duh moment of the week. As for the block's, must as I appreciate Phantek's case quality, I have been hesitant to use the water blocks foguring it's going to take 2-3 generations to get it just right. When they get there, and they offer blocks for custom PCBs, I'm likely to give it a shot.

 

[Dammeron]

(...)must as I appreciate Phantek's case quality, I have been hesitant to use the water blocks foguring it's going to take 2-3 generations to get it just right.

But where else You're gonna get a waterblock with a penis-shaped central flow canal?