- Joined
- Oct 9, 2007
- Messages
- 46,953 (7.61/day)
- Location
- Hyderabad, India
System Name | RBMK-1000 |
---|---|
Processor | AMD Ryzen 7 5700G |
Motherboard | ASUS ROG Strix B450-E Gaming |
Cooling | DeepCool Gammax L240 V2 |
Memory | 2x 8GB G.Skill Sniper X |
Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
Storage | Western Digital Black NVMe 512GB |
Display(s) | BenQ 1440p 60 Hz 27-inch |
Case | Corsair Carbide 100R |
Audio Device(s) | ASUS SupremeFX S1220A |
Power Supply | Cooler Master MWE Gold 650W |
Mouse | ASUS ROG Strix Impact |
Keyboard | Gamdias Hermes E2 |
Software | Windows 11 Pro |
Anidees released the RGB VGA Cooler, which isn't strictly what its name means - it isn't a replacement to your graphics card's cooling solution, but rather a supplement. You install it on a slot below your graphics card, and it boosts airflow to it. The accessory takes up two expansion slots in your system, needs at least a PCIe x4 slot (for leverage, not power), and fastens into your case like any add-on card.
A shroud on the accessory suspends three 80 mm fans that each spin at speeds of up to 1,600 RPM, pushing 11.14 CFM of air, at a noise output of 19.3 dBA. You control the speed and lighting of the fans through an included RF remote control. You can additionally control it via software by plugging the cooler to a 4-pin fan header on your motherboard (just for its PWM signal). It relies on a SATA power input as its main source of power. You can also synchronize the lighting of the three fans by plugging it to a standard 3-pin ARGB header, to control it via popular RGB software that support the standard. The Anidees RGB VGA Cooler measures 30 cm in length, and is about 2 slots thick. It weighs 560 g. The company didn't reveal pricing.
View at TechPowerUp Main Site
A shroud on the accessory suspends three 80 mm fans that each spin at speeds of up to 1,600 RPM, pushing 11.14 CFM of air, at a noise output of 19.3 dBA. You control the speed and lighting of the fans through an included RF remote control. You can additionally control it via software by plugging the cooler to a 4-pin fan header on your motherboard (just for its PWM signal). It relies on a SATA power input as its main source of power. You can also synchronize the lighting of the three fans by plugging it to a standard 3-pin ARGB header, to control it via popular RGB software that support the standard. The Anidees RGB VGA Cooler measures 30 cm in length, and is about 2 slots thick. It weighs 560 g. The company didn't reveal pricing.
![](https://www.techpowerup.com/img/X2trFZX2ImTaoWlg_thm.jpg)
![](https://www.techpowerup.com/img/Sg13dIorf740u5xo_thm.jpg)
![](https://www.techpowerup.com/img/kl9cu9SD44x6QbuF_thm.jpg)
![](https://www.techpowerup.com/img/NWRiX37yxLfgSS25_thm.jpg)
![](https://www.techpowerup.com/img/KlT3oFGDGwPlkdlz_thm.jpg)
View at TechPowerUp Main Site