Shenzhen based Milk-V has been busy announcing some very high performance RISC-V based platforms, and has now added another to a rapidly growing list. The Milk-V Mars is a new hobbiest grade RISC-V SBC that intentionally mimics the footprint and layout of the Raspberry Pi 3 Model B, so much so that existing cases and accessories will fit. The credit-card sized Mars packs a very competent array of features, starting with the StarFive JH7110 SoC. The JH7110 contains four 64-bit SiFive U74 RISC-V cores clocked as high as 1.5 GHz as well as an integrated Imagination Technologies IMG BXE-2-32 graphics engine with support for Vulkan 1.3, OpenGL ES 3.x, OpenCL 3.0, and Android NN HAL. This SoC should be the perfect choice for an SBC in this form factor, as it has proven to be on the similarly sized PINE64 Star64 as well as StarFive's VisionFive 2. Surrounding the SoC is a single LPDDR4 module, configurable at purchase up to 8 GB, the traditional 40-pin GPIO header row, a M.2 E-Key for WiFi/BT expansion, a MIPI display serial interface with 4K30 output and H.264/H.265 4K60 decoding, MIPI camera serial interface, HDMI, a USB-C for 5 V power input, a 3.5 mm audio jack, and finally the rear I/O block which consists of three USB 3.0 Type-A, a single USB 2.0 Type-A, and the RJ-45 for Gigabit Ethernet as well as PoE. Storage is expandable with both eMMC and microSD cards. The last tiny header is for powering a fan, which many R Pi cases opt to include, but is not included with the Mars. Availability of the Milk-V Mars is listed as "Coming Soon" and prices have not yet been announced. However to compete with the other options on the market we hope, and expect, that it does not exceed $75 USD. Unlike the Milk-V Pioneer there hasn't been any word on whether the Mars will be as open-source friendly, but it would behoove them to consider the option for this type of hobbyist oriented device.
View at TechPowerUp Main Site | Source
View at TechPowerUp Main Site | Source