- Joined
- Oct 9, 2007
- Messages
- 46,973 (7.60/day)
- Location
- Hyderabad, India
System Name | RBMK-1000 |
---|---|
Processor | AMD Ryzen 7 5700G |
Motherboard | ASUS ROG Strix B450-E Gaming |
Cooling | DeepCool Gammax L240 V2 |
Memory | 2x 8GB G.Skill Sniper X |
Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
Storage | Western Digital Black NVMe 512GB |
Display(s) | BenQ 1440p 60 Hz 27-inch |
Case | Corsair Carbide 100R |
Audio Device(s) | ASUS SupremeFX S1220A |
Power Supply | Cooler Master MWE Gold 650W |
Mouse | ASUS ROG Strix Impact |
Keyboard | Gamdias Hermes E2 |
Software | Windows 11 Pro |
Alphacool 2-part thermal adhesive is perfect for mounting coolers onto items such as motherboard VRMs. The 2-part epoxy-based adhesive is the optimal choice when coolers need to be mounted more securely onto the CPU or GPU of single-board computers (Raspberry PI, ODROID, Arduino, Cubieboard etc.). The field of application is so wide that even coolers on electronic components in power amplifiers or RC vehicles can be reliably and stably bonded.
Technical data
For more information, and to purchase, visit this page.
View at TechPowerUp Main Site
![](https://www.techpowerup.com/img/bJzK2VBBlQFXc869_thm.jpg)
![](https://www.techpowerup.com/img/RwAeZNzjZFplmlAq_thm.jpg)
![](https://www.techpowerup.com/img/Fu1cA9PJbmubZZ8C_thm.jpg)
Technical data
- Mixing ratio (adhesive : activator): 4:1
- Thermal conductivity: 0.9 W/mK
- Surface curing (at 25°C): 2 h
- Total curing (at 25°C): 5-7 Tage
- Boiling point: >200°C
- Flash point: >88°C
- Specific gravity (yellow component): 0.97 g/cm³
- Specific gravity (black component): 2.08 g/cm³
- Epoxy resin: 20 - 22 %
- Aluminium nitride: 70 - 73 %
- Epoxy diluent: 4 - 6 %
- Substituted silane: 0.1 - 0.2 %
- Carbon black: 0.5 - 1 %
- Total weight: 4 g
- Polyamide: 80 - 100 %
- Additive: 0 - 5 %
- Total weight: 1 g
For more information, and to purchase, visit this page.
View at TechPowerUp Main Site