Asus Strix G533Qs Repasting and VGA bios Update.

[Kliszczak]

Hello, I recently became the owner of Asus Strix G533QS. Overall, I find the laptop very nice, but I always like to improve this and that.
The first thing I want to do is clean the old paste and apply the new one. Which one do you recommend, PTM7950 or Kryonaut extreme?
I see that there is K5 Pro paste on the power section etc. But I wonder if it would be a better idea to put on Thermopads, I was thinking about it
Gelid GP-Ultimate, but I don't know what thickness, 0.5 or 1.5?
After these operations, I was thinking about changing the VGA bios, from what I see, people upload the 150W on the Techpower Up website, it is visible like this
https://www.techpowerup.com/vgabios...ion=&interface=&memType=GDDR6&memSize=&since= from Asus or MSI, have any of you done such an operation? I only came across a few threads

https://www.reddit.com/r/GamingLaptops/comments/oi7kv6

Currently, I have 11650 on my overclocked 200 Core and 300 Mem in TimeSpy.
I replaced the power supply with a 280W one to have a spare.

 

[Borc]

PTM7950 isn't a paste, although it is much better than Kryonaut extreme of course.

 

[eidairaman1]

Hello, I recently became the owner of Asus Strix G533QS. Overall, I find the laptop very nice, but I always like to improve this and that.
The first thing I want to do is clean the old paste and apply the new one. Which one do you recommend, PTM7950 or Kryonaut extreme?
I see that there is K5 Pro paste on the power section etc. But I wonder if it would be a better idea to put on Thermopads, I was thinking about it
Gelid GP-Ultimate, but I don't know what thickness, 0.5 or 1.5?
After these operations, I was thinking about changing the VGA bios, from what I see, people upload the 150W on the Techpower Up website, it is visible like this
https://www.techpowerup.com/vgabios...ion=&interface=&memType=GDDR6&memSize=&since= from Asus or MSI, have any of you done such an operation? I only came across a few threads

https://www.reddit.com/r/GamingLaptops/comments/oi7kv6

Currently, I have 11650 on my overclocked 200 Core and 300 Mem in TimeSpy.
I replaced the power supply with a 280W one to have a spare.

Your best bet would to chat on reddit about doing it, flashing a laptop is not suggested at all

 

[FreedomEclipse]

PTM7950/Thermalright Heilos.

As for bios flashing. That would improve your laptop. It would be an awesome dinner tray.

 

[Kliszczak]

What Thickness i must use. On vram i use 0.5 mm but on capasity etc what I need must use? When i Use 1mm pads gpu have bad contact and CPU,

 

[jayjr1105]

PTM7950 isn't a paste, although it is much better than Kryonaut extreme of course.

There actually is a PTM7950 in paste form, it's just not as good as the sheets. It should be avoided all together imo.