• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

AZZA Cast 808

Darksaber

Darksaber

Senior Editor & Case Reviewer
Staff member
Joined
Jul 8, 2005
Messages
3,090 (0.44/day)
Location
Victoria, BC, Canada
System Specs
System Name Meshlicious Monster
Processor Intel Core i5-10600T
Motherboard MSI Z490I Unify
Cooling NZXT Kraken Z53 with 2x Noctua Redux 1300 RPM PWM fans
Memory ADATA 16 GB 3200 Mhz DDR4
Video Card(s) MSI GeForce RTX 3070 Gaming X Trio
Storage TeamGroup 1TB NVMe SSD
Display(s) Asus ProArt 27" 1440P, 75Hz
Case ssupd Meshlicious with mesh side panels
Power Supply Fractal Design Ion 660 W Platinum ATX
Mouse Corsair Dark Core RGB Pro Wireless
Keyboard Microsoft Sidewinder X4 Keyboard
Software Windows 10 Home
The AZZA Cast 808 is an extraordinary chassis with an outer shell that has hinges at the top and bottom and a gap in the middle—it even lacks a rear panel. This makes the AZZA Cast 808 a unique open-frame case.

Show full review
 
ZoneDymo

ZoneDymo

Joined
Feb 11, 2009
Messages
5,556 (0.96/day)
System Specs
System Name Cyberline
Processor Intel Core i7 2600k -> 12600k
Motherboard Asus P8P67 LE Rev 3.0 -> Gigabyte Z690 Auros Elite DDR4
Cooling Tuniq Tower 120 -> Custom Watercoolingloop
Memory Corsair (4x2) 8gb 1600mhz -> Crucial (8x2) 16gb 3600mhz
Video Card(s) AMD RX480 -> RX7800XT
Storage Samsung 750 Evo 250gb SSD + WD 1tb x 2 + WD 2tb -> 2tb MVMe SSD
Display(s) Philips 32inch LPF5605H (television) -> Dell S3220DGF
Case antec 600 -> Thermaltake Tenor HTCP case
Audio Device(s) Focusrite 2i4 (USB)
Power Supply Seasonic 620watt 80+ Platinum
Mouse Elecom EX-G
Keyboard Rapoo V700
Software Windows 10 Pro 64bit
why did you put the radiator behind a pretty much completely closed off panel? seems...rather inefficient, the fans will be starved for air.

why is the front not just mesh or something, for all that "openness" its suprisingly impossible to put a rad anywhere.
 
Rowsol

Rowsol

Joined
Mar 30, 2011
Messages
979 (0.20/day)
System Specs
Processor 12100
Video Card(s) 1650 Super
Case Coolermaster Ammo 533
Mouse G403
Keyboard Sidewinder x4
Look at those load temps.
  • Open frame means no dust protection or noise encapsulation
Click to expand...
Well seeing as how the noise is also the lowest yet tested this seems like a non-issue.
 
Caring1

Caring1

Joined
Oct 22, 2014
Messages
14,105 (3.82/day)
Location
Sunshine Coast
System Specs
System Name H7 Flow 2024
Processor AMD 5800X3D
Motherboard Asus X570 Tough Gaming
Cooling Custom liquid
Memory 32 GB DDR4
Video Card(s) Intel ARC A750
Storage Crucial P5 Plus 2TB.
Display(s) AOC 24" Freesync 1m.s. 75Hz
Mouse Lenovo
Keyboard Eweadn Mechanical
Software W11 Pro 64 bit
They should bring out a high air flow version with ventilated front and top panels.
 
Chrispy_

Chrispy_

Joined
Feb 20, 2019
Messages
8,287 (3.93/day)
System Specs
System Name Bragging Rights
Processor Atom Z3735F 1.33GHz
Motherboard It has no markings but it's green
Cooling No, it's a 2.2W processor
Memory 2GB DDR3L-1333
Video Card(s) Gen7 Intel HD (4EU @ 311MHz)
Storage 32GB eMMC and 128GB Sandisk Extreme U3
Display(s) 10" IPS 1280x800 60Hz
Case Veddha T2
Audio Device(s) Apparently, yes
Power Supply Samsung 18W 5V fast-charger
Mouse MX Anywhere 2
Keyboard Logitech MX Keys (not Cherry MX at all)
VR HMD Samsung Oddyssey, not that I'd plug it into this though....
Software W10 21H1, barely
Benchmark Scores I once clocked a Celeron-300A to 564MHz on an Abit BE6 and it scored over 9000.
Cool, you actually got one for review!
I remember thinking this was going to be a really interesting case when I saw the press release, and it sure is.

I don't agree with the solid panel at the front. IMO it is an unnecessary hinderance for the AIO. Sure, temperatures are pretty decent regardless but I feel that the temperature results of this case would have been dominating all the charts rather than just the GPU charts if they'd actually gone to the effort of drilling some slots into that front panel.

The price is a pleasant surprise though - I expected small batch run pricing of €300-500 per unit.
 
KrachB00Mente

KrachB00Mente

Joined
Dec 2, 2007
Messages
34 (0.01/day)
Location
Germany
System Specs
System Name Lowman
Processor AMD Ryzen 9 5950X
Motherboard Asus X570 Gaming E
Cooling 3x 360mm Radiator D5 Pump
Memory 4x 16GB 3600 Trident Z Neo
Video Card(s) XFX Radeon RX 6900XT Merc 319 Black + Alphacool Eisblock Aurora
Storage 2x Samsung 970 Evo M.2 1TB + SSDs + Nas
Display(s) LG Ultragear 34gn850, 2x Dell S2721DGFA, Samsung G9 Odyssey, Philips 4K 40" (BDM4065UC),
Case Lian Li O11 Dynamic XL + front Distro Plate
Audio Device(s) NI Komplete Audio 2, JBL 305, Teufel SW5000 THX Sub, Rode NT1-A Steelseries Arctis Pro Wireless
Power Supply ASUS ROG Thor Platinum 850w
Mouse Logitech G903
Keyboard Logitech G815
VR HMD Oculus Quest 2
Software Windows 11
Benchmark Scores Timespy 18630
My question would be why is the radiator mounted upside down?
The same (i think) is true for the CPU. If you mount it this way around chances are high that air gets trapped in the CPU block.
 
Last edited:
Chrispy_

Chrispy_

Joined
Feb 20, 2019
Messages
8,287 (3.93/day)
System Specs
System Name Bragging Rights
Processor Atom Z3735F 1.33GHz
Motherboard It has no markings but it's green
Cooling No, it's a 2.2W processor
Memory 2GB DDR3L-1333
Video Card(s) Gen7 Intel HD (4EU @ 311MHz)
Storage 32GB eMMC and 128GB Sandisk Extreme U3
Display(s) 10" IPS 1280x800 60Hz
Case Veddha T2
Audio Device(s) Apparently, yes
Power Supply Samsung 18W 5V fast-charger
Mouse MX Anywhere 2
Keyboard Logitech MX Keys (not Cherry MX at all)
VR HMD Samsung Oddyssey, not that I'd plug it into this though....
Software W10 21H1, barely
Benchmark Scores I once clocked a Celeron-300A to 564MHz on an Abit BE6 and it scored over 9000.
KrachB00Mente said:
My question would be why is the radiator mounted upside down?
The same (i think) is true for the CPU. If you mount it this way around chances are high that air gets trapped in the CPU block.
Click to expand...
Air won't get trapped in the CPU block as long as it's not the highest point in the system. The channels in the block are relatively small compared to the flow rate so bubbles are forcibly evicted very quickly after turning on the system.

In this particular instance, I am going to guess that @Darksaber was limited by the AOI in question, something that he couldn't change as the standardised test bench requires the exact same hardware to be used every single time.
  1. There's a drive/cable shroud that comes with the case which obstructs the radiator inlet/outlet if flipped so that the tubes are at the bottom. Since this is a case test and not an AIO test, all parts of the case should be used and the shroud had to stay.

  2. This particular AIO has a pump in the tubes near the radiator inlet/outlet, not on the CPU block like most designs. That means that with the CPU block rotated it would almost certainly have the pump as the highest point in the loop which is VERY BAD. with the CPU block connections at the bottom, it pulls the cables down, and stops the pump from being the highest point in the loop.
And yes, for your own system, pump at the bottom, sealed header tank end of the radiator at the top is the best/quietest/longest-term choice but for a test bench that's going to be dismantled in a couple of days, I don't think you need to worry about it; It's not going to have caused any meaningful temperature/noise differences that would show up in the test results.
 
You must log in or register to reply here.
Top