BIOS MOD for 5600XT ASUS ROG STRIX, BOTH BIOS BRICKED.

[angel_chocano]

Hello everyone. iam looking for help tore flash my Dual Bios Asus rog strix 5600 XT.
iam getting some problems for get the device avaible on my amdvbflash, for best understund i will post the next Pictures.

Picture 1: PCB for check memory and Bios chips

+ Bios chip that iam doing bridge with my tweezers :

- like the GPU, it doesn't give an image, making the jumper detect the card, but I can't have it available to flash it.

When I try to enter AMDVFLASH and detect the card, it manages to appear, but once I give unlock or some command just to visualize the GPU, it disappears, it doesn't let me make any changes. Has anyone had a similar problem?

this is how this look on m DOS amdvflash

+ When i try on windows is the same that on DOS, whats does mean?

i can check for a while the device, but after i try put a comand this make unavaible

At some point I mistakenly installed a Bios mod on my ASUS ROG STRIX 5600xt, now I am trying to recover the bios of this card, on Linux or Windows, no success at all.
Can someone tell me what I am missing to do? Or do you think I may have made a mistake in the process mentioned above?


i hope here can get any support for my problem
i try to use diferents atiflash 2.90 , amdvbflkassh 3.30
but still the same result.

 

[eidairaman1]

Stop it for now you will be given directions.

Why did you flash to begin with?

Hello everyone. iam looking for help tore flash my Dual Bios Asus rog strix 5600 XT.
iam getting some problems for get the device avaible on my amdvbflash, for best understund i will post the next Pictures.

Picture 1: PCB for check memory and Bios chips
View attachment 299629

+ Bios chip that iam doing bridge with my tweezers :

View attachment 299628

- like the GPU, it doesn't give an image, making the jumper detect the card, but I can't have it available to flash it.
View attachment 299631



When I try to enter AMDVFLASH and detect the card, it manages to appear, but once I give unlock or some command just to visualize the GPU, it disappears, it doesn't let me make any changes. Has anyone had a similar problem?

View attachment 299632
this is how this look on m DOS amdvflash
View attachment 299635

+ When i try on windows is the same that on DOS, whats does mean?
View attachment 299633

i can check for a while the device, but after i try put a comand this make unavaible

At some point I mistakenly installed a Bios mod on my ASUS ROG STRIX 5600xt, now I am trying to recover the bios of this card, on Linux or Windows, no success at all.
Can someone tell me what I am missing to do? Or do you think I may have made a mistake in the process mentioned above?


i hope here can get any support for my problem
i try to use diferents atiflash 2.90 , amdvbflkassh 3.30
but still the same result.

 

[angel_chocano]

i was trying to get better performance on mining with a bios mod, but when i try to solve the bios i upload a bad bios to the two channels of bios, so now i cant start the gpu without make the bridge on bios chip, i has other gigabyte 5600 on similar status but i fixed it without problem just diference that has double bios this one rog strix, the gigabte has onl once.
do u know what can be the problem for detect the device for a while but cant flash it.

if u need more info for tryy to guide me. let me some guides pls!
thanks for u repply.

 

[Regeneration]

Try: amdvbflash -s 0 filename.rom

Or with quotations: amdvbflash -f -p "0" "filename.rom"

 

[eidairaman1]

i was trying to get better performance on mining with a bios mod, but when i try to solve the bios i upload a bad bios to the two channels of bios, so now i cant start the gpu without make the bridge on bios chip, i has other gigabyte 5600 on similar status but i fixed it without problem just diference that has double bios this one rog strix, the gigabte has onl once.
do u know what can be the problem for detect the device for a while but cant flash it.

if u need more info for tryy to guide me. let me some guides pls!
thanks for u repply.

You cannot Modify the vbios on Vega and Newer Cards, only Polaris and older

Try: amdvbflash -s 0 filename.rom

Or with quotations: amdvbflash -f -p "0" "filename.rom"

2.93 doesnt work for Navi or newer,

 

[angel_chocano]

You cannot Modify the vbios on Vega and Newer Cards, only Polaris and older


2.93 doesnt work for Navi or newer,

can u explainme wich version i has to use, or can u explain me why my adapter dissaper after i check amdvbflash-i

which one is ur advice dude?

Try: amdvbflash -s 0 filename.rom

Or with quotations: amdvbflash -f -p "0" "filename.rom"

i try diferents comands in diferents places, check the pictures but i dont get the device avaible is my problem, no that comand alredy.

 

[eidairaman1]

can u explainme wich version i has to use, or can u explain me why my adapter dissaper after i check amdvbflash-i

which one is ur advice dude?


i try diferents comands in diferents places, check the pictures but i dont get the device avaible is my problem, no that comand alredy.

Stop what you are doing and have patience, you will have your answers needed.

Ok is it

ROG-STRIX-RX5600XT-O6G-GAMING

OR

ROG-STRIX-RX5600XT-T6G-GAMING

 

[angel_chocano]

Stop what you are doing and have patience, you will have your answers needed.

Ok is it

ROG-STRIX-RX5600XT-O6G-GAMING

OR

ROG-STRIX-RX5600XT-T6G-GAMING

ROG-STRIX-RX5600XT-T6G-GAMING
this model.

here is trying a amdvbflash 3.3

but allways i get recognized the gpu, but after a moment this dissaper and looks like adapter not found.


here i show how is avaible.
and after a while when i start some flash utility this dissaper.
this is a long time battle.
hope anyone can give me a guide to fix my problem
thanks.

Try: amdvbflash -s 0 filename.rom

Or with quotations: amdvbflash -f -p "0" "filename.rom"

there is u proof.

 

[eidairaman1]

View attachment 299673

ROG-STRIX-RX5600XT-T6G-GAMING
this model.

here is trying a amdvbflash 3.3
View attachment 299687
but allways i get recognized the gpu, but after a moment this dissaper and looks like adapter not found.

View attachment 299690View attachment 299688
here i show how is avaible.
and after a while when i start some flash utility this dissaper.
this is a long time battle.
hope anyone can give me a guide to fix my problem
thanks.

there is u proof.

You will need to follow this carefully and do not skip any steps.

Download 1 of these bios:

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Go here and get the latest amdvbflash which is version 5.0.567

https://www.techpowerup.com/download/ati-atiflash/

Then

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of amdvbflash_win_5.0.567.zip to the "C:\atiflash" folder (make sure everything is in C:\atiflash and not another folder)

3. Find the bios file you downloaded and rename the bios file to r5600.rom

4. Move r5600.rom to the "C:\atiflash" folder

5.Open the directory/folder, double click AMDVBFlashDriverInstaller.exe and allow it to install
YOU MUST INSTALL THIS FOR AMDVBFLASH TO WORK, YOU CAN UNINSTALL IT USING THE EXACT SAME .EXE

6. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

7. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

8. Type in cd/atiflash and press enter, you should see C:\atiflash>

9. At C:\atiflash> type in amdvbflash.exe -i to identify your card with a 0, 1, or 2

10. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0 (or 1, 2)
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked"

11. At the C:\atiflash> prompt type in
amdvbflash.exe -p 0 r5600.rom -fa -fp

(there is a space between amdvbflash.exe and -p, a space between -p and 0, a space between 0 and r5600.rom, a space between r5600.rom and -fa, and a space between -fa and -fp)

Press Enter.

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on

 

[angel_chocano]

You will need to follow this carefully and do not skip any steps.

Download 1 of these bios:

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Asus RX 5600 XT VBIOS

6 GB GDDR6, 1465 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Go here and get the latest amdvbflash which is version 5.0.567

https://www.techpowerup.com/download/ati-atiflash/

Then

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of amdvbflash_win_5.0.567.zip to the "C:\atiflash" folder (make sure everything is in C:\atiflash and not another folder)

3. Find the bios file you downloaded and rename the bios file to r5600.rom

4. Move r5600.rom to the "C:\atiflash" folder

5.Open the directory/folder, double click AMDVBFlashDriverInstaller.exe and allow it to install
YOU MUST INSTALL THIS FOR AMDVBFLASH TO WORK, YOU CAN UNINSTALL IT USING THE EXACT SAME .EXE

6. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

7. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

8. Type in cd/atiflash and press enter, you should see C:\atiflash>

9. At C:\atiflash> type in amdvbflash.exe -i to identify your card with a 0, 1, or 2

10. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0 (or 1, 2)
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked"

11. At the C:\atiflash> prompt type in
amdvbflash.exe -p 0 r5600.rom -fa -fp

(there is a space between amdvbflash.exe and -p, a space between -p and 0, a space between 0 and r5600.rom, a space between r5600.rom and -fa, and a space between -fa and -fp)

Press Enter.

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on

Hello, sorry for my delay on give u my feedback:
Well, this is still very confusing for me, I manage to get windows to detect the card, but when I enter the "amdbvflash" again, it disappears out of nowhere, I have changed the versions, file names, and advanced without problem to step number 9 , but then it is presented to me as you can see in the image, as if no card is available.
I have tried in Q bios mod, and in P bios mod. Neither of the 2 modes let me reflash or properly detect the card, what could you recommend? thanks a lot.

- add i try to change SO, and reinstal AMDVBFLASH on new SO. still the same
-can anyone guide me how may can i use "autoinstaller .Bat" or any suggest thanks

 

[eidairaman1]

Go here and get the latest amdvbflash which is version 5.0.567

https://www.techpowerup.com/download/ati-atiflash/

Then

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of amdvbflash_win_5.0.567.zip to the "C:\atiflash" folder (make sure everything is in C:\atiflash and not another folder)

3. Find the bios file you downloaded and rename the bios file to r5600.rom

4. Move r5600.rom to the "C:\atiflash" folder

5.Open the directory/folder, double click AMDVBFlashDriverInstaller.exe and allow it to install
YOU MUST INSTALL THIS FOR AMDVBFLASH TO WORK, YOU CAN UNINSTALL IT USING THE EXACT SAME .EXE

6. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

7. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

8. Type in cd/atiflash and press enter, you should see C:\atiflash>

9. At C:\atiflash> type in amdvbflash.exe -i to identify your card with a 0, 1, or 2

10. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0 (or 1, 2)
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked"

11. At the C:\atiflash> prompt type in
amdvbflash.exe -p 0 r5600.rom -fa -fp

(there is a space between amdvbflash.exe and -p, a space between -p and 0, a space between 0 and r5600.rom, a space between r5600.rom and -fa, and a space between -fa and -fp)

Press Enter.

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on

Hello, sorry for my delay on give u my feedback:
Well, this is still very confusing for me, I manage to get windows to detect the card, but when I enter the "amdbvflash" again, it disappears out of nowhere, I have changed the versions, file names, and advanced without problem to step number 9 , but then it is presented to me as you can see in the image, as if no card is available.
I have tried in Q bios mod, and in P bios mod. Neither of the 2 modes let me reflash or properly detect the card, what could you recommend? thanks a lot.

- add i try to change SO, and reinstal AMDVBFLASH on new SO. still the same
-can anyone guide me how may can i use "autoinstaller .Bat" or any suggest thanks

View attachment 300006

You dont have the card on a cable do you?

 

[angel_chocano]

Go here and get the latest amdvbflash which is version 5.0.567

https://www.techpowerup.com/download/ati-atiflash/

Then

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of amdvbflash_win_5.0.567.zip to the "C:\atiflash" folder (make sure everything is in C:\atiflash and not another folder)

3. Find the bios file you downloaded and rename the bios file to r5600.rom

4. Move r5600.rom to the "C:\atiflash" folder

5.Open the directory/folder, double click AMDVBFlashDriverInstaller.exe and allow it to install
YOU MUST INSTALL THIS FOR AMDVBFLASH TO WORK, YOU CAN UNINSTALL IT USING THE EXACT SAME .EXE

6. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

7. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

8. Type in cd/atiflash and press enter, you should see C:\atiflash>

9. At C:\atiflash> type in amdvbflash.exe -i to identify your card with a 0, 1, or 2

10. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0 (or 1, 2)
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked"

11. At the C:\atiflash> prompt type in
amdvbflash.exe -p 0 r5600.rom -fa -fp

(there is a space between amdvbflash.exe and -p, a space between -p and 0, a space between 0 and r5600.rom, a space between r5600.rom and -fa, and a space between -fa and -fp)

Press Enter.

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on

You dont have the card on a cable do you?

i has the same version of amdbvflash and i follow all the steps without problem until step 9

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of amdvbflash_win_5.0.567.zip to the "C:\atiflash" folder (make sure everything is in C:\atiflash and not another folder)

3. Find the bios file you downloaded and rename the bios file to r5600.rom

4. Move r5600.rom to the "C:\atiflash" folder

5.Open the directory/folder, double click AMDVBFlashDriverInstaller.exe and allow it to install
YOU MUST INSTALL THIS FOR AMDVBFLASH TO WORK, YOU CAN UNINSTALL IT USING THE EXACT SAME .EXE

6. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

7. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

8. Type in cd/atiflash and press enter, you should see C:\atiflash>

9. At C:\atiflash> type in amdvbflash.exe -i to identify your card with a 0, 1, or 2

after here i cant do anthing cus i cant detect my device but after i open amdbvflash is avaible.
on the picture bellow u can check my steps.

and i has conected on a RISER v09 to pci x1.
using the INTEGRATED GRAPHICs at moment NO CABLE on the GPU bricked.

unfortunately I had a small accident with the PCB, this integrated was damaged when making contact with a hard drive, I think that now I can break this shit into pieces hahahaha.
I'm sorry, thank you very much for your support.

+ Do you know if it's worth repairing this damaged IC that I'm holding with the tweezers?

i Hope this is the end of my bad lucky cards!

 

[eidairaman1]

The riser cable is causing your problems. Go find a pc with 2 full size pcie 16x slots, as long as the second slot is 4-8x in data it wont matter but flashing on 1x with riser cable, it's no wonder why you have detection problems.

You must flash gpus directly plugged into the pcie slot, not on a riser cable.

i has the same version of amdbvflash and i follow all the steps without problem until step 9

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of amdvbflash_win_5.0.567.zip to the "C:\atiflash" folder (make sure everything is in C:\atiflash and not another folder)

3. Find the bios file you downloaded and rename the bios file to r5600.rom

4. Move r5600.rom to the "C:\atiflash" folder

5.Open the directory/folder, double click AMDVBFlashDriverInstaller.exe and allow it to install
YOU MUST INSTALL THIS FOR AMDVBFLASH TO WORK, YOU CAN UNINSTALL IT USING THE EXACT SAME .EXE

6. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

7. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

8. Type in cd/atiflash and press enter, you should see C:\atiflash>

9. At C:\atiflash> type in amdvbflash.exe -i to identify your card with a 0, 1, or 2

after here i cant do anthing cus i cant detect my device but after i open amdbvflash is avaible.
on the picture bellow u can check my steps.

and i has conected on a RISER v09 to pci x1.
using the INTEGRATED GRAPHICs at moment NO CABLE on the GPU bricked.

unfortunately I had a small accident with the PCB, this integrated was damaged when making contact with a hard drive, I think that now I can break this shit into pieces hahahaha.
I'm sorry, thank you very much for your support.

+ Do you know if it's worth repairing this damaged IC that I'm holding with the tweezers?


View attachment 300010
i Hope this is the end of my bad lucky cards!

I would have a professional fix the gpu such as northridgefix or krisfix.de