bricked 3070 after vbios flash

[Kaaaaaaaaaaasss]

Hello so I seem to have bricked my 3070 gaming oc rev 1 by trying to update the vbios for rebar support as i was told the version i originally had it wasnt possible i downloaded the newest firmware from gigabytes website for my card and installed it nothing happened my screen went black for mulitple hours and my pc sounded like a jet engine and eventually it shut off and i tried rebooting it and had no display

I unplugged my gpu and turned on IGPU then plugged it back in and got it to post but ive tried reflashing using nvflash and i keep getting No Nvidia Adapters Found errors ive tried the modded version in another post and a few other older versions as some people suggested it in other posts but none have had any effect Also to note i cannot get my pc to boot if i turn off IGD in the msi bios at all even with the multi display thingy. thats all for now any advice would help thankssss

one more thing to note my gpu does have a bios switch but neither the oc or silent mode seem to change anything regarding the issue

 

[eidairaman1]

Hello so I seem to have bricked my 3070 gaming oc rev 1 by trying to update the vbios for rebar support as i was told the version i originally had it wasnt possible i downloaded the newest firmware from gigabytes website for my card and installed it nothing happened my screen went black for mulitple hours and my pc sounded like a jet engine and eventually it shut off and i tried rebooting it and had no display

I unplugged my gpu and turned on IGPU then plugged it back in and got it to post but ive tried reflashing using nvflash and i keep getting No Nvidia Adapters Found errors ive tried the modded version in another post and a few other older versions as some people suggested it in other posts but none have had any effect Also to note i cannot get my pc to boot if i turn off IGD in the msi bios at all even with the multi display thingy. thats all for now any advice would help thankssss

one more thing to note my gpu does have a bios switch but neither the oc or silent mode seem to change anything regarding the issue

Ok so can you not boot up at all on the gpu?

 

[Kaaaaaaaaaaasss]

Ok so can you not boot up at all on the gpu?

If i unplug the gpu completely then go into bios and enable IGD i can then turn it off and plug it back in but thats the only time

 

[eidairaman1]

If i unplug the gpu completely then go into bios and enable IGD i can then turn it off and plug it back in but thats the only time

Ok get a picture of the white part number and model number sticker on the back of the card please.

 

[Kaaaaaaaaaaasss]

 

[eidairaman1]

View attachment 385193

Zoom out on the card, take a picture of the complete back and the front please and the video outputs too

View attachment 385193

Yeah that code doesnt turn up anything

 

[Kaaaaaaaaaaasss]

 

[eidairaman1]

Ok a gigabyte rtx 3070 gaming oc r1.0

 

[Kaaaaaaaaaaasss]

is there a way i can fix it or do i need to goto a repair shop

 

[eidairaman1]

is there a way i can fix it or do i need to goto a repair shop

Patience

This should be your card below

GeForce RTX™ 3070 GAMING OC 8G (rev. 1.0) Specification | Graphics Card - GIGABYTE Global

Discover AORUS premium graphics cards, ft. WINDFORCE cooling, RGB lighting, PCB protection, and VR friendly features for the best gaming and VR experience!

www.gigabyte.com

 

[Kaaaaaaaaaaasss]

yep i believe so

 

[eidairaman1]

Silent bios

Gigabyte RTX 3070 VBIOS

8 GB GDDR6, 1500 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Gigabyte RTX 3070 VBIOS

8 GB GDDR6, 1500 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Gigabyte RTX 3070 VBIOS

8 GB GDDR6, 1500 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Oc bios

Gigabyte RTX 3070 VBIOS

8 GB GDDR6, 1500 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Gigabyte RTX 3070 VBIOS

8 GB GDDR6, 1500 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Gigabyte RTX 3070 VBIOS

8 GB GDDR6, 1500 MHz GPU, 1750 MHz Memory

www.techpowerup.com

The rest

TechPowerUp

Extensive repository of graphics card BIOS image files. Our database covers submissions categorized by GPU vendor, type, and board partner variant.

www.techpowerup.com

yep i believe so

@Kaaaaaaaaaaasss

 

[Kaaaaaaaaaaasss]

so when i boot into safemode and try i still get the No Nvidia Display Adapters found

 

[eidairaman1]

so when i boot into safemode and try i still get the No Nvidia Display Adapters found

What about normal boot?

Kaaaaaaaaaaasss

www.techpowerup.com

I just saw you write that its same issue in normal boot.
You might need to get a green pcb based spi flasher and follow @Solaris17 or @Regeneration guides

 

[Kaaaaaaaaaaasss]

i get the same result in normalboot it doesnt showup in device manger or gpuz either

 

[eidairaman1]

i get the same result in normalboot it doesnt showup in device manger or gpuz either

See my previous message or get a pro to fix it.

 

[Kaaaaaaaaaaasss]

alrighty thank u for ur time

 

[FoulOnWhite]

i get the same result in normalboot it doesnt showup in device manger or gpuz either

You need one of these
Edit
This one has a 1.8v adapter.
https://amzn.eu/d/iCD4jlp

 

[eidairaman1]

You need one of these
View attachment 385217

I think its the green pcb 1 @VuurVOS might be able to confirm as 1 of them allows too much voltage to be applied.

 

[FoulOnWhite]

I think its the green pcb 1 @VuurVOS might be able to confirm as 1 of them allows too much voltage to be applied.

Ok
I think I have 2, one is modded because of voltage. I think my other has a selectable voltage

I think its the green pcb 1 @VuurVOS might be able to confirm as 1 of them allows too much voltage to be applied.

Edit wrong link

 

[Solaris17]

I think its the green pcb 1 @VuurVOS might be able to confirm as 1 of them allows too much voltage to be applied.

mhm. you can mod the black or just get the green. If you want to do it yourself with explanations of different programmers the links, and the difference between the CH341's themselves are here

Guide: Flashing with a hardware programmer

Lets get physical So; you tried flashing your GPU and you didn't backup. Now you have some dude on the forum linking you a BIOS but you have no way to apply it because you don't have a spare GPU either. Well no worries friend. In this guide we are going to cover the simple procedures of...

www.techpowerup.com