cannot erase rom error prompt

[LevSun]

Hello everyone,

so i'm trying to flash my powercolor red dragon rx 5700xt bios. i'm trying to flash my bios because my vga cannot run above 90W power limit, so i suspect that my bios is having problems.
but when i try to flash the vbios, i got this error.

here's the screenshot of the error

Please HELP ME

 

[VuurVOS]

Hello everyone,

so i'm trying to flash my powercolor red dragon rx 5700xt bios. i'm trying to flash my bios because my vga cannot run above 90W power limit, so i suspect that my bios is having problems.
but when i try to flash the vbios, i got this error.

here's the screenshot of the error

Please HELP ME

First of all dont use amdvbflashWIN!!!

Use amdvbflash 2.93 when flashing a RX 5700 XT: https://www.techpowerup.com/forums/attachments/atiflash293plus-zip.354205/

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of atiflash_293.zip to the "C:\atiflash" folder

3. Find the bios file you downloaded and rename the bios file to 5 digits with .rom on end Example RX 580, change file to rx580.rom (r****.rom)

4. Move r****.rom to the "C:\atiflash" folder

5. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

6. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

7. Type in cd/atiflash and press enter, you should see C:\atiflash>

8. Type in amdvbflash.exe -i to identify the gpu you want to flash with a 0, 1, or 2)

9. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked" (or 1, 2)

10. At the C:\atiflash> prompt type in
amdvbflash.exe -f -p 0 r****.rom
(there is a space between the .exe and -f, and a space between -f and -p and 0).
(Or 1, 2)

Press Enter

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on screen.