changed timings after bios update, anything where it should be? (before i run ram test longer)

[Waldorf]

i did re-use existing (stable) timings/voltages, but decide to use auto for procodt, until i noticed with the latest bios it showed 60 (36.96 before), and having some minor usb probs (icon not leaving tray),
decided to re-do them.

tested with HCI (dos) and it passed 100%, so i dont expect any adjustments needed beyond a single step (up), as well that this is the best performing so far, incl AMP on auto (for everything).
will do full test (+16005) to see if its really stable (intermittent stuff), but would like some feedback regarding timings/settings, just to make sure i didnt miss anything, or changes missing that could net some more perf.

bdie 3600C14/2T@1.45v, running 3600C16/1T@1.36

 

[ir_cow]

Can't really go much lower in the primaries without rasing the voltage. You might be able to do 14-15-15 with 1.45 at 3600. 4000 will need 1.55V

try y-cruncher 2.5B and see if it errors out.

 

[Waldorf]

thanks.
yeah, tried it for giggles, and AMP (C14;1.45) is slower than C16@1.35 with a handful tuned secondaries, and my kit seems to like timings more, as above 3600 needed 1.45+C18 (all) to even post,
and gains arent enough vs latency i got, so went with 3600.

temps arent an issue, but i dont see the return if i push vdimm.

 

[DarkDreams]

tRRDS/L should do 4/6, probably even 4/4
tRFC 252
tRDRDSCL and tWRWRSCL should both be ok at 2

 

[Waldorf]

nothing below 320 perf better, under 272 isnt stable.
running test right now, once i veryfied current settings, ill lower those others.

thanks for your input, folks.

@ir_cow
yeah anything better on primaries and/or clock needs more juice, but actually gives me a slight drop over flat 16@1.36 with manually tuned sec.

@DarkDreams
while screenshot values are +2500% stable, overlooked i wasnt using proper "related" secondary timings, going RFC 288/RRD 4/6 works incl small gain, and some of the tertiary timings dropped by itself (AUTO),
and will probably keep those, but dont care for another day the pc is blocked for another 20h.