So i got a ,,AsRock z690 Phantom Gaming ITX/TB4” and Arctic LFIII ARGB 360. I don’t want to do the all in one cable because as i believe connecting every cable individually gives you much better control. So on my motherboard i have: CPU_FAN1, CPU_FAN2, CHA_FAN1. And correct me if i’m wrong but i think this AIO has 3 cables to connect: Pump, Fan, VRM (and argb ofc) . I thought about connecting Pump to cpu1, Fan to cpu2 and VEM to cha1. So you guys think it’s fine? I got other fans on my nzxt controller connected via USB 2.0. Oh and also are the fan cables already daisy chained or i have to do it myself?
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
Connecting Arctic LFIII ARGB to motherboard
- Thread starter antos_151
- Start date
- Joined
- Aug 19, 2024
- Messages
- 470 (2.81/day)
- Location
- Texas, USA
| System Name | Obliterator |
|---|---|
| Processor | Ryzen 7 7700x PBO |
| Motherboard | ASRock x670e Steel Legend |
| Cooling | Noctua NH-D15 G2 LBC |
| Memory | G.skill Trident Z5 Neo 6000@CL30 |
| Video Card(s) | ASRock rx7900 GRE Steel Legend |
| Storage | 2 x 2TB Samsung 990 pro nmve ssd 2 X 4TB Samsung 870 evo sata ssd 1 X 18TB WD Gold sata hdd |
| Display(s) | LG 27GN750-B |
| Case | Fractal Torrent |
| Audio Device(s) | Klipsch promedia heritage 2.1 |
| Power Supply | FSP Hydro TI 1000w |
| Mouse | SteelSeries Prime+ |
| Keyboard | Lenovo SK-8825 (L) |
| Software | Windows 10 Enterprise LTSC 21H2 / Windows 11 Enterprise LTSC 24H2 with multiple flavors of VM |
If you cannot tell by looking, you really should let someone else install it for you.
I don’t physically have the aio yet. I ordered it 2 days ago. Of course i can recognise it but i couldn’t find any youtube video showing it well. I’m not so dumb
- Joined
- Aug 19, 2024
- Messages
- 470 (2.81/day)
- Location
- Texas, USA
| System Name | Obliterator |
|---|---|
| Processor | Ryzen 7 7700x PBO |
| Motherboard | ASRock x670e Steel Legend |
| Cooling | Noctua NH-D15 G2 LBC |
| Memory | G.skill Trident Z5 Neo 6000@CL30 |
| Video Card(s) | ASRock rx7900 GRE Steel Legend |
| Storage | 2 x 2TB Samsung 990 pro nmve ssd 2 X 4TB Samsung 870 evo sata ssd 1 X 18TB WD Gold sata hdd |
| Display(s) | LG 27GN750-B |
| Case | Fractal Torrent |
| Audio Device(s) | Klipsch promedia heritage 2.1 |
| Power Supply | FSP Hydro TI 1000w |
| Mouse | SteelSeries Prime+ |
| Keyboard | Lenovo SK-8825 (L) |
| Software | Windows 10 Enterprise LTSC 21H2 / Windows 11 Enterprise LTSC 24H2 with multiple flavors of VM |
No one thinks you are dumb. "I got" infers to me that you are already in possession of it. I will not presume next time, but it could have been more clear.
Any PWM fan connector is fine. There are only 3 on the motherboard, so those are the ones you'll be using.
Since the manual, install guide, etc. (all available documentation) says nothing about you having to connect the radiator fans to each other, one can assume that it is already done for you. You'll know very quickly once you receive it.
Any PWM fan connector is fine. There are only 3 on the motherboard, so those are the ones you'll be using.
Since the manual, install guide, etc. (all available documentation) says nothing about you having to connect the radiator fans to each other, one can assume that it is already done for you. You'll know very quickly once you receive it.
- Joined
- Sep 3, 2019
- Messages
- 3,778 (1.91/day)
- Location
- Thessaloniki, Greece
| System Name | PC on since Aug 2019, 1st CPU R5 3600 + ASUS ROG RX580 8GB >> MSI Gaming X RX5700XT (Jan 2020) |
|---|---|
| Processor | Ryzen 9 5900X (July 2022), 200W PPT limit, 80C temp limit, CO -6-14, +50MHz (up to 5.0GHz) |
| Motherboard | Gigabyte X570 Aorus Pro (Rev1.0), BIOS F39b, AGESA V2 1.2.0.C |
| Cooling | Arctic Liquid Freezer II 420mm Rev7 (Jan 2024) with off-center mount for Ryzen, TIM: Kryonaut |
| Memory | 2x16GB G.Skill Trident Z Neo GTZN (July 2022) 3600MT/s 1.38V CL16-16-16-16-32-48 1T, tRFC:280, B-die |
| Video Card(s) | Sapphire Nitro+ RX 7900XTX (Dec 2023) 314~467W (382W current) PowerLimit, 1060mV, Adrenalin v24.12.1 |
| Storage | Samsung NVMe: 980Pro 1TB(OS 2022), 970Pro 512GB(2019) / SATA-III: 850Pro 1TB(2015) 860Evo 1TB(2020) |
| Display(s) | Dell Alienware AW3423DW 34" QD-OLED curved (1800R), 3440x1440 144Hz (max 175Hz) HDR400/1000, VRR on |
| Case | None... naked on desk |
| Audio Device(s) | Astro A50 headset |
| Power Supply | Corsair HX750i, ATX v2.4, 80+ Platinum, 93% (250~700W), modular, single/dual rail (switch) |
| Mouse | Logitech MX Master (Gen1) |
| Keyboard | Logitech G15 (Gen2) w/ LCDSirReal applet |
| Software | Windows 11 Home 64bit (v24H2, OSBuild 26100.2605), upgraded from Win10 to Win11 on Jan 2024 |
Have it in your hands first and take it from there.
I have an LFII nonRGB 420 and connect it to board with all-in-1 cable on the CPU_OPT header, and set a curve through Gigabyte's software.
When I first connect it to CPU_FAN the pump wasn't working. All of my board's FUN/PUMP headers (7) are 4pin PWM capable but not all can work a pump.
Keep that in mind.
If your board doesn't have a CPU_OPT header then either CPU_FAN1 or CPU_FAN2 is a pump capable if not both.
Maybe this can help you
I will keep an eye on that. I will try go with seperate cables but if i will have any issues i will go with the all in one. But i don’t think this issues will happen because a lot changed from LFII to LFIII. But we never know, thanks for info