- Joined
- Dec 8, 2020
- Messages
- 2,858 (2.09/day)
Downloads: Equalizer APO | E-APO Stereo Upmixer.
----
1A: Disable the device(s) you want to add EAPO to using Windows 'Sound Control Panel' | 1B: For DTS DCH run 'Equalizer APO.reg' from 'DTS Settings' on the device(s):
![DTS Settings.png DTS Settings.png](https://tpucdn.com/forums/data/attachments/305/305406-a1117cf9c2014aee5f56b81b659ea944.jpg)
----
2: Install EAPO, at the device config, tick the device(s) you want, at the bottom tick troubleshoot, and set SFX/MFX, pre-mix, no post-mix (per device):
![Equalizer APO.png Equalizer APO.png](https://tpucdn.com/forums/data/attachments/305/305407-ab96f895f52cf6631a19edad09d54127.jpg)
3: Say no to the restart, then run 'Configure.reg' from my 'Upmixer Config', then copy the [.txt] files to [C:\Program Files\EqualizerAPO\Config]:
![Config Path.png Config Path.png](https://tpucdn.com/forums/data/attachments/305/305409-06b7f2887e24d66a1d23e644a706edb1.jpg)
4: Run the EAPO config editor, and add your already setup device(s) to the main panel:
![Config Editor.png Config Editor.png](https://tpucdn.com/forums/data/attachments/334/334592-00ee7510da1db55bd832e914ab720f1e.jpg)
5: Restart, then enable the device(s).
----
----
1A: Disable the device(s) you want to add EAPO to using Windows 'Sound Control Panel' | 1B: For DTS DCH run 'Equalizer APO.reg' from 'DTS Settings' on the device(s):
![DTS Settings.png DTS Settings.png](https://tpucdn.com/forums/data/attachments/305/305406-a1117cf9c2014aee5f56b81b659ea944.jpg)
----
2: Install EAPO, at the device config, tick the device(s) you want, at the bottom tick troubleshoot, and set SFX/MFX, pre-mix, no post-mix (per device):
![Equalizer APO.png Equalizer APO.png](https://tpucdn.com/forums/data/attachments/305/305407-ab96f895f52cf6631a19edad09d54127.jpg)
3: Say no to the restart, then run 'Configure.reg' from my 'Upmixer Config', then copy the [.txt] files to [C:\Program Files\EqualizerAPO\Config]:
![Config Path.png Config Path.png](https://tpucdn.com/forums/data/attachments/305/305409-06b7f2887e24d66a1d23e644a706edb1.jpg)
4: Run the EAPO config editor, and add your already setup device(s) to the main panel:
![Config Editor.png Config Editor.png](https://tpucdn.com/forums/data/attachments/334/334592-00ee7510da1db55bd832e914ab720f1e.jpg)
5: Restart, then enable the device(s).
----
Attachments
Last edited: