• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

GPU fan keeps revving up and down

Dunn Pliskin

New Member
Joined
Jan 19, 2023
Messages
6 (0.01/day)
I'm not sure if this is appropriate but, A while ago, I bought a used ASUS GTX 750 Ti which looks something like the photo I posted.
When I received it and installed drivers, It started making loud noises and then quiet all of the sudden over and over again, and continues on when my computer is on. I then found out it was the fan and I have tried using a custom fan curve as some people suggested but that didn't work as well.
My GPU works fine for the most bit but the fan revving at full speed and then turning off over and over is really annoying and I want to fan to stop doing it.
 

Attachments

  • images - 2023-01-20T033849.780.jpeg
    images - 2023-01-20T033849.780.jpeg
    20.3 KB · Views: 167
Joined
Dec 31, 2020
Messages
971 (0.69/day)
Try to Turn off the zero fan mode with the Asus software. It was possible on gigabyte, but I'm not aware about this one. When temperature reaches 55 it starts the fan at full speed instead of gradually ramping up and it's probably impossible to fix otherwise. As you happen to gravitate around 50 55 for your specific usage it will keep doing this.
 
Joined
Feb 20, 2020
Messages
9,340 (5.41/day)
Location
Louisiana
System Name Ghetto Rigs z490|x99|Acer 17 Nitro 7840hs/ 5600c40-2x16/ 4060/ 1tb acer stock m.2/ 4tb sn850x
Processor 10900k w/Optimus Foundation | 5930k w/Black Noctua D15
Motherboard z490 Maximus XII Apex | x99 Sabertooth
Cooling oCool D5 res-combo/280 GTX/ Optimus Foundation/ gpu water block | Blk D15
Memory Trident-Z Royal 4000c16 2x16gb | Trident-Z 3200c14 4x8gb
Video Card(s) Titan Xp-water | evga 980ti gaming-w/ air
Storage 970evo+500gb & sn850x 4tb | 860 pro 256gb | Acer m.2 1tb/ sn850x 4tb| Many2.5" sata's ssd 3.5hdd's
Display(s) 1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24"/ 3rd LG 43" series
Case D450 | Cherry Entertainment center on Test bench
Audio Device(s) Built in Realtek x2 with 2-Insignia 2.0 sound bars & 1-LG sound bar
Power Supply EVGA 1000P2 with APC AX1500 | 850P2 with CyberPower-GX1325U
Mouse Redragon 901 Perdition x3
Keyboard G710+x3
Software Win-7 pro x3 and win-10 & 11pro x3
Benchmark Scores Are in the benchmark section
Hi,
Pretty old card
Have you replaced the thermal pads and paste yet ?
 
Joined
Dec 24, 2008
Messages
2,062 (0.36/day)
Location
Volos, Greece
System Name ATLAS
Processor Intel Core i7-4770 (4C/8T) Haswell
Motherboard GA-Z87X-UD5H , Dual Intel LAN, 10x SATA, 16x Power phace.
Cooling ProlimaTech Armageddon - Dual GELID 140 Silent PWM
Memory Mushkin Blackline DDR3 2400 997123F 16GB
Video Card(s) MSI GTX1060 OC 6GB (single fan) Micron
Storage WD Raptors 73Gb - Raid1 10.000rpm
Display(s) DELL U2311H
Case HEC Compucase CI-6919 Full tower (2003) moded .. hec-group.com.tw
Audio Device(s) Creative X-Fi Music + mods, Audigy front Panel - YAMAHA quad speakers with Sub.
Power Supply HPU-4M780-PE refurbished 23-3-2022
Mouse MS Pro IntelliMouse 16.000 Dpi Pixart Paw 3389
Keyboard Microsoft Wired 600
Software Win 7 Pro x64 ( Retail Box ) for EU
Red alert, Red alert, wrong Bios loaded...
Get GPU-Z software and research GPU current Bios details.

Prior the verification of original Bios in use, any of our advice's will be pointless.
 

Dunn Pliskin

New Member
Joined
Jan 19, 2023
Messages
6 (0.01/day)
Try to Turn off the zero fan mode with the Asus software. It was possible on gigabyte, but I'm not aware about this one. When temperature reaches 55 it starts the fan at full speed instead of gradually ramping up and it's probably impossible to fix otherwise. As you happen to gravitate around 50 55 for your specific usage it will keep doing this.
Where is this option? I cannot find it anywhere.

Hi,
Pretty old card
Have you replaced the thermal pads and paste yet ?
I have indeed.

Red alert, Red alert, wrong Bios loaded...
Get GPU-Z software and research GPU current Bios details.

Prior the verification of original Bios in use, any of our advice's will be pointless.
My BIOS version is 82.07.32.00.27
 

Count von Schwalbe

Moderator
Staff member
Joined
Nov 15, 2021
Messages
3,028 (2.77/day)
Location
Knoxville, TN, USA
System Name Work Computer | Unfinished Computer
Processor Core i7-6700 | Ryzen 5 5600X
Motherboard Dell Q170 | Gigabyte Aorus Elite Wi-Fi
Cooling A fan? | Truly Custom Loop
Memory 4x4GB Crucial 2133 C17 | 4x8GB Corsair Vengeance RGB 3600 C26
Video Card(s) Dell Radeon R7 450 | RTX 2080 Ti FE
Storage Crucial BX500 2TB | TBD
Display(s) 3x LG QHD 32" GSM5B96 | TBD
Case Dell | Heavily Modified Phanteks P400
Power Supply Dell TFX Non-standard | EVGA BQ 650W
Mouse Monster No-Name $7 Gaming Mouse| TBD
If it is a BIOS issue, you will need a screenshot of GPU-Z and a picture of the white sticker on the back of the card.

Preferably also a photo of the VRAM chips.
 
Joined
Jul 3, 2018
Messages
229 (0.10/day)
Location
Australia
Processor Intel Core i7-13700KF
Motherboard GIGABYTE Z690 AORUS ELITE
Cooling Dark Rock Pro 4
Memory G.Skill Ripjaws DDR4-4000 32GB (4x8GB)
Video Card(s) ASUS TUF Gaming Radeon RX 7900 XT OC Edition 20GB GDDR6
Storage Various
Display(s) GIGABYTE M32U 4K 144hz
Audio Device(s) External Amp
Software KDE Neon
It might just need a re-paste.
 
Joined
Dec 14, 2011
Messages
275 (0.06/day)
Processor 12900K @5.1all Pcore only, 1.23v
Motherboard MSI Edge
Cooling D15 Chromax Black
Memory 32GB 4000 C15
Video Card(s) 4090 Suprim X
Storage Various Samsung M.2s, 860 evo other
Display(s) Predator X27 / Deck (Nreal air) / LG C3 83
Case FD Torrent
Audio Device(s) Hifiman Ananda / AudioEngine A5+
Power Supply Seasonic Prime TX 1000W
Mouse Amazon finest (no brand)
Keyboard Amazon finest (no brand)
VR HMD Index
Benchmark Scores I got some numbers.
I had this happen on a 2080ti once, reseating it stopped it. Worth pointing out that the card was showing quite a bit of sagging and I added a support bracket - however that didnt arrive for a week, during which time no revving happened.
 
Joined
Dec 6, 2018
Messages
342 (0.16/day)
Location
Hungary
Processor i5-9600K
Motherboard ASUS Prime Z390-A
Cooling Cooler Master Hyper 212 Black Edition PWM
Memory G.Skill DDR4 RipjawsV 3200MHz 16GB kit
Video Card(s) Asus RTX2060 ROG STRIX GAMING
Display(s) Samsung Odyssey G7 27"
Case Cooler Master MasterCase H500
Power Supply SUPER FLOWER Leadex Gold 650W
Mouse BenQ Zowie FK1+-B
Keyboard Cherry KC 1000
Software Win 10
Where is this option? I cannot find it anywhere.
Button called "0dB Fan" right under "OC Scanner" on the home screen of GPU Tweak III. Needs to be in off position.
 
Joined
Dec 6, 2018
Messages
342 (0.16/day)
Location
Hungary
Processor i5-9600K
Motherboard ASUS Prime Z390-A
Cooling Cooler Master Hyper 212 Black Edition PWM
Memory G.Skill DDR4 RipjawsV 3200MHz 16GB kit
Video Card(s) Asus RTX2060 ROG STRIX GAMING
Display(s) Samsung Odyssey G7 27"
Case Cooler Master MasterCase H500
Power Supply SUPER FLOWER Leadex Gold 650W
Mouse BenQ Zowie FK1+-B
Keyboard Cherry KC 1000
Software Win 10
looks like it's not supported by your card, weird.
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
8,039 (1.10/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 3
Software Win 11 Pro x64
Everything looks okay in GPUZ. With GPU Tweak have you tried just setting a set speed? say try 50% and then try using it and see if the temps are okay and the fan noise is tolerable and maybe work from there. I’m not familiar with the tool but it does appear to have an ”edit” function next to auto so per my previous advice you may be able to use that to set a curve yourself that would stop whatever the “Auto” weirdness your‘re experiencing
As for as its acting now have you monitored the temps while.this is happening to make sure there isn’t actually some kind of temp spikes making. It do this?
 

Dunn Pliskin

New Member
Joined
Jan 19, 2023
Messages
6 (0.01/day)
Everything looks okay in GPUZ. With GPU Tweak have you tried just setting a set speed? say try 50% and then try using it and see if the temps are okay and the fan noise is tolerable and maybe work from there. I’m not familiar with the tool but it does appear to have an ”edit” function next to auto so per my previous advice you may be able to use that to set a curve yourself that would stop whatever the “Auto” weirdness your‘re experiencing
As for as its acting now have you monitored the temps while.this is happening to make sure there isn’t actually some kind of temp spikes making. It do this?
I have tried setting up a speed but it would still keep revving unless I put it all the way to 100% speed.
 

FreedomEclipse

~Technological Technocrat~
Joined
Apr 20, 2007
Messages
24,009 (3.74/day)
Location
London,UK
System Name DarnGosh Edition
Processor AMD 7800X3D
Motherboard MSI X670E GAMING PLUS
Cooling Thermalright AM5 Contact Frame + Phantom Spirit 120SE
Memory G.Skill Trident Z5 NEO DDR5 6000 CL32-38-38-96
Video Card(s) Asus Dual Radeon™ RX 6700 XT OC Edition
Storage WD SN770 1TB (Boot)| 2x 2TB WD SN770 (Gaming)| 2x 2TB Crucial BX500| 2x 3TB Toshiba DT01ACA300
Display(s) LG GP850-B
Case Corsair 760T (White) {1xCorsair ML120 Pro|5xML140 Pro}
Audio Device(s) Yamaha RX-V573|Speakers: JBL Control One|Auna 300-CN|Wharfedale Diamond SW150
Power Supply Seasonic Focus GX-850 80+ GOLD
Mouse Logitech G502 X
Keyboard Duckyshine Dead LED(s) III
Software Windows 11 Home
Benchmark Scores ლ(ಠ益ಠ)ლ
How good are you with basic tech skills?

You could dismantle the card - give it some new thermal paste and wiggle fan cables where it attaches and seats into the card to see if anything changes otherwise it could be one of two things...

1. the controller on the fan is gone.
2. the controller on the card is gone.

which leaves another two options...

1. buy a replacement fan assembly:



You can get them off ebay or aliexpress for cheap.

Alternatively. You can keep the same shroud and just replace the fan by inputting the model number into ebay or aliexpress - which can be found here on the back of the fan motor (the sticker) :

1674218968462.png


New fan looks like it clips right in.

2. GHETTO MOD:

1674219096272.png



It doesnt look very pretty but it will work and you can throw any old and dirty fan you have lying around on there with some zip ties. Probably the cheapest option as well as most people will have cheap fans lying around.
 

Count von Schwalbe

Moderator
Staff member
Joined
Nov 15, 2021
Messages
3,028 (2.77/day)
Location
Knoxville, TN, USA
System Name Work Computer | Unfinished Computer
Processor Core i7-6700 | Ryzen 5 5600X
Motherboard Dell Q170 | Gigabyte Aorus Elite Wi-Fi
Cooling A fan? | Truly Custom Loop
Memory 4x4GB Crucial 2133 C17 | 4x8GB Corsair Vengeance RGB 3600 C26
Video Card(s) Dell Radeon R7 450 | RTX 2080 Ti FE
Storage Crucial BX500 2TB | TBD
Display(s) 3x LG QHD 32" GSM5B96 | TBD
Case Dell | Heavily Modified Phanteks P400
Power Supply Dell TFX Non-standard | EVGA BQ 650W
Mouse Monster No-Name $7 Gaming Mouse| TBD
The only thing I can see that could be a concern is that the PCIe revision seems to be stuck at 1.1. if you can put a load (any benchmark will work) on the GPU and check GPU-Z again to make sure that it is not a power saving think, that will answer the VBIOS question.
 
Joined
Jan 31, 2012
Messages
2,630 (0.56/day)
Location
East Europe
System Name PLAHI
Processor I5-10400
Motherboard MSI MPG Z490 GAMING PLUS
Cooling 120 AIO
Memory 32GB Corsair LPX 2400 Mhz DDR4 CL14
Video Card(s) PNY QUADRO RTX A2000
Storage Intel 670P 512GB
Display(s) Philips 288E2A 28" 4K + 22" LG 1080p
Case Thermaltake URBAN R31
Audio Device(s) Creative Soundblaster Z SE
Power Supply Fractal Design IntegraM 650W
Mouse Logitech Triathlon
Keyboard REDRAGON MITRA
Software Windows 11 Home x 64
I'd say +1 @FreedomEclipse about the controller on the card. I had to fight the infamous issue on Gigabyte GTX970, that wouldn't control it's fans at all, straight to 100%. After what-not, simplest solution was to buy a cable adapter 4pin female from the card's fan to standard and just hooked it to my Lamptron or motherboard.

image_2023-01-20_154628078.png
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,935 (6.61/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Fan controller on gpu is toast, replace gpu and move forward.
 
Joined
Feb 20, 2020
Messages
9,340 (5.41/day)
Location
Louisiana
System Name Ghetto Rigs z490|x99|Acer 17 Nitro 7840hs/ 5600c40-2x16/ 4060/ 1tb acer stock m.2/ 4tb sn850x
Processor 10900k w/Optimus Foundation | 5930k w/Black Noctua D15
Motherboard z490 Maximus XII Apex | x99 Sabertooth
Cooling oCool D5 res-combo/280 GTX/ Optimus Foundation/ gpu water block | Blk D15
Memory Trident-Z Royal 4000c16 2x16gb | Trident-Z 3200c14 4x8gb
Video Card(s) Titan Xp-water | evga 980ti gaming-w/ air
Storage 970evo+500gb & sn850x 4tb | 860 pro 256gb | Acer m.2 1tb/ sn850x 4tb| Many2.5" sata's ssd 3.5hdd's
Display(s) 1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24"/ 3rd LG 43" series
Case D450 | Cherry Entertainment center on Test bench
Audio Device(s) Built in Realtek x2 with 2-Insignia 2.0 sound bars & 1-LG sound bar
Power Supply EVGA 1000P2 with APC AX1500 | 850P2 with CyberPower-GX1325U
Mouse Redragon 901 Perdition x3
Keyboard G710+x3
Software Win-7 pro x3 and win-10 & 11pro x3
Benchmark Scores Are in the benchmark section
I have tried setting up a speed but it would still keep revving unless I put it all the way to 100% speed.
Hi,
How does it turn manually
Feel sticky or not smooth ?
Might just need some lube :/
 
Joined
Nov 2, 2020
Messages
1,337 (0.91/day)
Location
Tel Fyr
System Name Purple Haze | Vacuum Box
Processor AMD Ryzen 7 5800X3D (-30 CO) | Intel® Xeon® E3-1241 v3
Motherboard MSI B450 Tomahawk Max | Gigabyte GA-Z87X-UD5H
Cooling Dark Rock 4 Pro, P14, P12, T30 case fans | 212 Evo & P12 PWM PST x2, Arctic P14 & P12 case fans
Memory 32GB Ballistix (Micron E 19nm) CL16 @3733MHz | 32GB HyperX Beast 2400MHz (XMP)
Video Card(s) AMD 6900XTXH ASRock OC Formula & Phanteks T30x3 | AMD 5700XT Sapphire Nitro+ & Arctic P12x2
Storage ADATA SX8200 Pro 1TB, Toshiba P300 3TB x2 | Kingston A400 120GB, Fanxiang S500 Pro 256GB
Display(s) TCL C805 50", Mi 2K Gaming Monitor 27", AOC 24G2U
Case Modded MS Industrial Titan II Pro RGB | Heavily Modded Cooler Master Q500L
Audio Device(s) Audient iD14 MKII, Adam Audio T8Vs, Bloody M550, HiFiMan HE400se, Tascam TM-80, DS4 v2
Power Supply Rosewill Capstone 1000M | Enermax Revolution X't 730W (both with P14 fans)
Mouse Logitech G305, Bloody A91, Amazon basics, Logitech M187
Keyboard Redragon K530, Bloody B930, Epomaker TH80 SE, BTC 9110
Software W10 LTSC 21H2
Pull that shroud (with the fan) off, and toss it into the garbage can. Buy Arctic P12 PWM, strap it on the heatsink with w/e (zip ties?), and run the fan from the motherboard fan header. Use the FanControl (best option) to set a custom curve based off of a GPU temperature sensor, or just set it in the BIOS using the options available (limited option).

2. GHETTO MOD:
Yes sir.
 
Joined
May 20, 2020
Messages
1,369 (0.84/day)
Fan controller on gpu is toast...
He's got a point there. If you are up to it, disconnect the fan's cable from the card and remove the first two wires (black=GND and yellow=12V) from the connector, you do that by pushing on the little inclined tabs visible from one side of the connector with a piece of paperclip wire and pulling on the wire (no excess force).
You then connect these two wires into an IDE/molex connector (they fit tightly), that is yellow one into red part (5V) and black one into the black that is near red. Fan will happily spin at 5V and you can observe temperatures.
If of course the card might get too hot (nearing 80°C), you can connect fan's yellow to molex yellow and fan's black to molex red to get 7V fan voltage and higher RPM.
This way the card will work very well and serve its purpose.
 
Top