HDD / FDD Supports

[RAA!]

Hey friends,

I have a old case that I've been doing a windows 2000 build in. The HDD and FDD treys both need mounts to position the drives correctly. Unfortunately I do not have enough to mount everything I need. Does anyone happen to know where I can get more of these?

Thanks!

 

[Bill_Bright]

I have a old case

What case? There is no industry standard for mounting drives beyond the screw hole locations, screw hole size, and threads per inch count. This means Antec may have one type of drive rails (that's what those things are called) and Cooler Master may have a different style rail. And because those rails are used to slide the attached drive into drive bays, and with no industry standard for those bays (other than the size of the drives they are designed to support), that means the drive rails and the bays they slide in must be compatible - that is, made for each other, as in a matched set.

So you need to provide the case brand and full model number.

 

[95Viper]

You may help the OP; however, the guidelines state:

No sales, WTB or trade dialogue is to take place in any public forum (including profile posts), all transactions/requests should be made in the B/S/T forum for transparency and to safeguard both parties. If members wish to discuss B/S/T outside of the B/S/T forum they do so at their own risk and must be done by private messaging.

Thank You and Have a Nice Day

 

[RAA!]

So you need to provide the case brand and full model number.

Thank you for your input, BIll.

That's part of the problem. I have no idea what model the case is. The identifiers I find don't seem to lead me anywhere:

Spoiler

If I could figure out what the case was I'm sure I'd be able to find what I need.

 

[Bill_Bright]

Well, sorry but I can't help you with that either. It may just be easier to use a different case.

 

[RAA!]

No biggie, just a shot in the dark hoping someone on here would recognize the case.

 

[Bill_Bright]

Well, sadly it looks pretty generic to me but hopefully someone will come by and recognize it.

Good luck.

 

[dorsetknob]

There is no industry standard for mounting drives beyond the screw hole locations, screw hole size, and threads per inch count. This means Antec may have one type of drive rails (that's what those things are called) and Cooler Master may have a different style rail. And because those rails are used to slide the attached drive into drive bays, and with no industry standard for those bays (other than the size of the drives they are designed to support), that means the drive rails and the bays they slide in must be compatible - that is, made for each other, as in a matched set.

So you need to provide the case brand and full model number.

OP.
You could post a picture with the Size mesurments indicated.
That might help someone match old drive rails they may have with what you need.

 

[bonehead123]

yHpM