- Joined
- Jan 22, 2020
- Messages
- 923 (0.56/day)
- Location
- Turkey
System Name | MSI-MEG |
---|---|
Processor | AMD Ryzen 9 3900X |
Motherboard | MSI MEG X570S ACE MAX |
Cooling | AMD Wraith Prism + Thermal Grizzly |
Memory | 32 GB |
Video Card(s) | MSI Suprim X RTX 3080 |
Storage | 500 GB MSI Spatium nvme + 500 GB WD nvme + 2 TB Seagate HDD + 2 TB Seagate HDD |
Display(s) | 27" LG 144HZ 2K ULTRAGEAR |
Case | MSI MPG Velox Airflow 100P |
Audio Device(s) | Altec Lansing |
Power Supply | Seasonic 750W 80+ Gold |
Mouse | HP OMEN REACTOR |
Keyboard | Corsair K68 |
Software | Windows10 LTSC 64 bit |
My laptop's GPU was reballed 2 years ago but it has failed again so I decided to revive it with my own method.
According to this chart, nonlead solder has a higher melting point than lead solder:
I got a cheap Einhell heat gun from amazon (model:th-ha2000)
After some calculations, I decided to direct the hot air for about 195 secs here: (don't forget to insulate the other parts from the excess heat)
After 12 hours of heavy benchmarking, it is running as new.
Don't know how long it can last, but it definitely buys some time.
According to this chart, nonlead solder has a higher melting point than lead solder:
I got a cheap Einhell heat gun from amazon (model:th-ha2000)
After some calculations, I decided to direct the hot air for about 195 secs here: (don't forget to insulate the other parts from the excess heat)
After 12 hours of heavy benchmarking, it is running as new.
Don't know how long it can last, but it definitely buys some time.