How to Modify RX 5600 OEM VBIOS?

[Sabotaged_Enigma]

Hey guys. Recently I've been lucky enough to get a Dell-branded RX 5600 (OEM) graphics card. But its frequency is limited to 1820 MHz in the same way as the RX 5600 XT. When I tried to modify it with RedBIOSEditor, the GPU ID function doesn't work because it doesn't recognise this model I suppose. So, is there some way to modify its VBIOS, or simply remove its frequency limit?

Here's the link of this card:

AMD Radeon RX 5600 OEM Specs

AMD Navi 10, 1560 MHz, 2048 Cores, 128 TMUs, 64 ROPs, 6144 MB GDDR6, 1500 MHz, 192 bit

www.techpowerup.com

 

[Colddecked]

Extract the bios with GPUz then use MorePowerTool to change frequency/power limit/voltages.

 

[Sabotaged_Enigma]

Extract the bios with GPUz then use MorePowerTool to change frequency/power limit/voltages.

Thanks. But I've tried and it doesn't work. Frequency limit is written in VBIOS and can't be removed by register-level changes.

 

[eidairaman1]

Thanks. But I've tried and it doesn't work. Frequency limit is written in VBIOS and can't be removed by register-level changes.

You may need to reference Igors lab

 

[Sabotaged_Enigma]

You may need to reference Igors lab

Thanks. And yeah I did, but that snapshot is the result... GPU ID function doesn't work 'cause it doesn't recognise it.

 

[Sabotaged_Enigma]

Hello? But nobody knows the solution?

 

[eidairaman1]

Hello? But nobody knows the solution?

You would need to learn hexadecimal

 

[Sabotaged_Enigma]

You would need to learn hexadecimal

Damn bro. That's a whole different new level risk is much hhhhhhigher. I guess I'll try

 

[eidairaman1]

Damn bro. That's a whole different new level risk is much hhhhhhigher. I guess I'll try

I wouldnt bother unless if you have a spi programmer and know how to use it

Yeah lowest the RBE goes is 5600XT it would seem.

Dell RX 5600 VBIOS

6 GB GDDR6, 1465 MHz GPU, 1500 MHz Memory

www.techpowerup.com

 

[Sabotaged_Enigma]

Dell RX 5600 VBIOS

6 GB GDDR6, 1465 MHz GPU, 1500 MHz Memory

www.techpowerup.com

Eh, this VBIOS is different from that of mine! Maybe it gives better performance even though I still couldn't unlock it. I'll try, thx!

 

[Beginner Macro Device]

The main concern in RX 5600 XT is VRAM speed, not the GPU one. 1820 MHz is perfectly fine for this GPU.

Focus on getting max performance from your VRAM. 192 bit bus paired with 12 GHz GDDR6 is far from ideal...

 

[Sabotaged_Enigma]

The main concern in RX 5600 XT is VRAM speed, not the GPU one. 1820 MHz is perfectly fine for this GPU.

Focus on getting max performance from your VRAM. 192 bit bus paired with 12 GHz GDDR6 is far from ideal...

I tried 1750 MHz on this card but it's not stable. I don't think that should happen...